Admiral Dishwasher Parts

This authentic Dishwasher Upper Rack Adjuster Kit with white wheels is a kit made up of primarily plastic and metal components, which will require a screwdriver to install. This kit comes with all the necessary parts for a dishwasher rack adjuster. It fits onto the dishwasher rack and connects it to the track allowing it to slide in and out. If broken then the rack will no longer slide properly, and the part must be replaced. In many cases, our customers have reported the top rack of their dishwasher hanging down or sagging due to the adjuster kit, particularly if the wheels, have broken or failed. If you are having problems in this area, this kit will help get your dishwasher back up and running. Check your model number and user manual to see if this part is right for you. The parts for this kit come as a package and are not generally sold individually.

The rack track stop on your dishwasher is designed to stop the dish rack at the appropriate place when opening and closing the rack. If your dishwasher is not cleaning your dishes properly, the rack stop may need to be replaced. The replacement part may differ slightly from the broken part, depending on the model. However, the different styles are interchangeable. This product is sold individually and comes in both a white and grey plastic version. Many of our customers found this repair to be very easy and takes less than 30 minutes to complete. Simply snap the old part out and snap the new part into place. You will not require any tools to complete the job. This is an authentic part approved by the manufacturer.

This manufacturer-certified heating element is used to create heat during the dry cycle and increase water temperature during portions of the wash cycle when certain options are selected. If your dishes are not drying or the water in the dishwasher is not getting hot you may need to replace the element. This kit includes the heater, two heater fasteners, and is a genuine OEM part. Please remember to disconnect the power before starting the repair. Use a multi-meter to test your heating element for continuity to determine whether this is the part that is causing your symptom. This part does not include any washers. To make your repair, disconnect the wires from the bottom of the element in the back, remove the plastic nuts holding it in place, remove the element, and repeat these steps in reverse order to install your new part. This is an easy repair that requires only a screwdriver, wrench set, and should take less than 30 minutes.

This is a lower spray arm for a dishwasher. The lower spray arm allows water to be spread evenly throughout the dishwasher tub with the proper force so dishes come out clean. This spray arm is gray in color and is about 20 inches long. You may need to replace this part if the water is not being distributed.

Sold individually. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward.

Also known as rack adjuster. Sold individually. This is an original part from KitchenAid, Kenmore, Whirlpool, Jenn-Air, and Maytag for use with Dishwashers. The dishrack adjuster arm positioner clip holds the adjuster arm in the right position on the dishrack. The most common reason for replacing the strap is if the rack will not stay in its desired position. This part is sold individually. There are no tools needed to replace the positioner.

This dishwasher door gasket seal is a durable, flexible rubber component designed to create a watertight seal between the dishwasher tub and door, preventing leaks during wash cycles. Made from high-quality rubber that withstands high temperatures, it ensures reliable performance and helps maintain proper cleaning efficiency. The gasket measures approximately the same size as the original seal and is easy to install—simply remove the old gasket and press the new one into the channel around the door. Ideal for resolving issues such as water leaking from the bottom or sides of the door or poor cleaning results.

If your dishwasher isn’t releasing detergent or rinse aid properly, this replacement dispenser could be the fix. It fits select Whirlpool, KitchenAid, Maytag, and Amana models and mounts inside the door. With separate compartments and a spring-loaded door, it releases detergent and rinse aid at just the right time during the cycle. Made from tough materials, it’s built to last. Just check your model number to make sure it’s the right fit.

Struggling with a dishwasher that's not cleaning your dishes properly? The issue might lie with your spray arm, a crucial part of your Whirlpool dishwasher's functionality. This top-quality Whirlpool spray arm is here to solve your dishwashing woes by boosting the performance of your appliance. When your spray arm is functioning its best, it rotates and sprays water evenly and powerfully across your dishes. This ensures an in-depth, comprehensive cleaning for each and every item in the dishwasher tub. The result? Dishes that sparkle, every time. Our Whirlpool spray arm is built to last, giving your dishwasher the endurance to tackle countless cycles of dirty dishes. With its durable construction, you can count on a lasting performance that stands up to regular, everyday use. Do note, it's best to wear work gloves while handling this part during repair, simply ensuring your hands are safe while you get your dishwasher back to top condition. Choose this Whirlpool spray arm and reignite the power of your dishwasher. With every wash, you'll appreciate the unmatched cleanliness standard it provides. After all, your Whirlpool dishwasher should be as relentless in cleanliness as you are. Invest in peace of mind and sparkling dishes today.

This filter works with the water pump in your dishwasher. It prevents debris from entering the pump and causing damage. As a result, the filter can occasionally become clogged or damaged, and will need to be replaced. A good indication of a damaged filter is if your dishwasher is not draining or cleaning the dishes properly. This filter has a gray plastic top and bottom that are approximately 5 inches in diameter. This is a genuine OEM part that comes directly from the manufacturer. To replace the filter, simply turn it counterclockwise to unlock, and then screw in the new filter