See part 6 in the diagram
( Grid squares measure 1x1 inch )
Dishwasher Positioner
$45.07
In Stock
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
PartSelect Number PS11750093
Manufacturer Part Number WPW10195840
Manufactured by
Whirlpool
Product Description
Dishwasher Positioner Specifications
Also known as rack adjuster. Sold individually.
This is an original part from KitchenAid, Kenmore, Whirlpool, Jenn-Air, and Maytag for use with Dishwashers. The dishrack adjuster arm positioner clip holds the adjuster arm in the right position on the dishrack. The most common reason for replacing the strap is if the rack will not stay in its desired position. This part is sold individually. There are no tools needed to replace the positioner.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door won’t close | Not cleaning dishes properly
This part works with the following products:
Dishwasher.
This part works with the following products:
KitchenAid, Kenmore, Whirlpool, Jenn-Air.
Part# WPW10195840 replaces these:
AP6016800, W10195840, W10418323
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Nancy
January 9, 2019
Part # w10195840 has a broken clip that goes into the round wheel that is in the slide arm which the rack slides in and out on. I'm not sure what part i need to order to replace the little nub that has broken
For model number KUDS35FXWH1
Hello Nancy, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: PS10064063. The clip that holds the wheel is only sold as part of the adjuster. The adjuster is only sold as a kit now due to an update to the parts. This kit includes the parts to replace the left and right-side rack adjusters and has been upgraded to a more durable metal design. Thank you for your inquiry, good luck with this repair!
46 people found this helpful.
Was this helpful?
Thank you for voting!
Jessica
July 16, 2019
The upper rack plastic piece that goes inside the white wheel broke off what part number?
For model number WDT750SAHZ
Hello Jessica, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS10065979. This is a kit that includes all parts required to make up 2 rack adjusters (right and left) and 2 adjuster actuators (right and left). Parts would need to be assembled. Hope this helps!
11 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
John
November 20, 2017
My upper dish rack falls down. It looks like the positioner on the right side is missing? How do we install a new positioner?
For model number KUDE60FXSS4
Hello John,
Thanks for your question. On the adjuster are two round ends that are clipped into the positioners which help it to stay in place which should be removed. Remove any baskets that are in the way and lower any tines near the positioner. Install the new positioner by aligning it on the rack. Lift the tines
to make sure they lock properly, and replace any baskets you may have taken out.
I hope this helps.
8 people found this helpful.
Was this helpful?
Thank you for voting!
Nancy
February 15, 2020
My Whirlpool top rack dishwasher has a wheel that moves the rack back and forth. That wheel appears to have broken of its connector to the rack. Please could you tell me what the assembly kit part number is? I understand from reading that most of the parts for the kit had been updated and that is why you need to purchase the kit rather than just the one piece that connects to the wheel. Is that correct? Thank you. I appreciate your time and help.
For model number WDT750SAHZ0
Hello and thank you for writing.
Part Number: PS10064063. The clip that holds the wheel is only sold as part of the adjuster. The adjuster is only sold as a kit now due to an update to the parts. This kit includes the parts to replace the left and right-side rack adjusters and has been upgraded to more durable metal design. We hope this helps. Please contact us anytime if you require further assistance.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
George
February 14, 2020
There is a plastic clip from the side of the upper dish rack that has broken. It appears to hold the rack in place vertically. Our temporary fix is to use a zip tie to hole it up. I am having trouble identifying the exact part from the parts diagram.
For model number KDFE104DBLO
Hello George, thank you for your question. From your description of the issue, the replacement parts you probably need are the PartSelect Number PS11756150 adjuster, adjuster arm PartSelect Number PS11750092 and positioner PartSelect Number PS11750093. I hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Kate
July 28, 2021
I’m also having the same problem with my dishwasher as Nancy described above. Part # w10195840 has a broken clip that goes into the round wheel that is in the slide arm which the rack slides in and out on. I'm not sure what part I need to order to replace the little nub that has broken. However my model number is 665.13269k114. Is PS10064063 the correct replacement part for me as well? Can you direct me to the correct part if not? Thanks.
For model number 66513269K114
Hello Kate, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS10065979. The rack adjuster kit has been redesigned as the original adjuster was not as stable and was causing issues for customers. The adjuster kit would come with all parts for the right and left side of the upper rack and would be the only parts that would fix the issue you're having. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Al
April 3, 2018
My dishwasher is like the one in the video. The white rollers on the side of the upper rack came off their axle. The axle shaft is cracked. How do i replace and what parts do i need?
For model number 65513259k111
Hello Al, thank you for your question. The wheels are not sold separately. The whole roller housing and the 2 white wheels would come together. The upper rack rollers are part number WPW10350401 and there are 4 of these assemblies required for the upper rack. Please enter the part number into the site for current price and availability. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Joyce
December 11, 2018
My dishwasher upper rack support has broken. I ordered part wpw10195840 but it is not the correct part. I believe the part i need is the one this part connects to, but i can't tell the part number from the diagram. Can you recommend the correct part number?
For model number KDFE104DSS4
Hi Joyce,
Thank you for your question. It sounds like the part you are looking for is the rack adjuster. The part number listed under your model number for the rack adjuster is PS11756150. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Kirk
September 18, 2019
Looking for part no
W10195840
is it still available or do i need to order the updated part ?
thanks kirk
For model number KDTE104ESS4
Kirk thank you for writing .
It is currently available. Hope this helps.Contact us anytime.
. If you would like to place an order with our company or inquire about pricing , availability and shipping , you will have to contact our customer service. You can do so one of two ways: online: www.ereplacementparts.com or telephone: 877 346 4814. Thank you.
thank you for contacting us
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jenny
May 14, 2019
According to the diagram i need part #4 for he upper rack, but i don’t see this part listed to order. Where can i get this part?
For model number WDT970SAHV0
Hello Jenny, thank you for inquiring. That is the Rack Adjuster Kit part PS10065979 for your model.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Part Videos
Replacing your KitchenAid Dishwasher Dishwasher Positioner
Customer Repair Stories
Average Repair Rating: 3.0 / 5.0, 13 reviews.
What's this?
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Top dish rack falling down because wheel restraints broken
The online video we found was really helpful.
Other Parts Used:
-
Robert from LAFAYETTE, CA -
Difficulty Level:Really Easy -
Total Repair Time:30 - 60 mins -
Tools:Screw drivers
73 of 87 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken parts on rack
Easy...easy....I first watched YouTube videos on how to fix our problem. We replaced both tracks and also the rack adjuster on both sides of the rack. The entire repair took about an hour and most of that time was spent finding the tools at our house!! I ordered the parts on a Sunday evening and they were at our house on Tuesday!!! Will use this sight again if repairs are needed.
Other Parts Used:
-
Kathie from Breda, IA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Wrench (Adjustable)
39 of 75 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The wheels on the upper rack kept coming off
What I needed were simple clips to lock in the wheels. I ended up getting a kit that required replacement of the roller tracts on both sides of the upper rack. The instructions were terrible. The repair took far more time than it should have. Once one side was fixed it was easy to fix the other side. By then I had worked my way around the muddled instructions.
Other Parts Used:
-
Robert from THE WOODLANDS, TX
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers
11 of 19 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Roller mount broke Rack Adjuster
Took half hour to take off old Adjuster just trying to figure which things pop off putting on new one side 10 minute at the most
Other Parts Used:
-
Robert R from FOLSOM, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
6 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My upper rack, even after replacing the upper rack tracks, would pivots forward or backward out of the horizontal.
It was easy to remove the old parts by using a screwdriver to push in “tabs” that kept retainer clips in place. Once removed, it was a matter of easy assembly in reverse and then re-clip. It became clear that the problem was because a few tabs that click into the sliding track and worn to the point where they no longer retained a tight connection to the track causing the upper rack to tilt with weight to front or back. Sure, the parts are a bit pricey but not when compared to a repair visit or a new KitchenAid which otherwise was functioning perfectly.
Other Parts Used:
-
Bob from MILFORD, NJ
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
5 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top rack assembly
Watched the video. Easy!!!
Other Parts Used:
-
Charles from MOUNTAIN BRK, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
3 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the wheel on one side of the upper rack broke off
After I finally got the right parts and installed them I discovered that even though I had bought the OEM part for my dishwasher it not only didn't fit but prevented me from even getting the upper rack back in the dishwasher. The dishwasher won't work with out the upper rack properly in place. Every part store I looked at offered the same part for my dishwasher so obviously Whirlpool made a huge mistake. Since it's not possible to get the old parts back on (one of them was broken anyway which is what started all of this) I had to buy a new dishwasher. I did contact Whirlpool by email but got no response. If you own a Whirlpool dishwasher be very cautious buying any replacement parts.
Other Parts Used:
-
Richard from FONTANA, CA
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
A plastic part on the top rack of my 2 year old dishwasher broke. Automatic dishwasher soap is corrosive and plastic parts should not be used in a dishwasher in the first place
The 1st person i had contact with wasn't any help choosing the correct part. Paid about $30.00 for the wrong part. Paid $8.00 more to ship the wrong part back for reimbursement. Meanwhile my son went to a local repair shop and got the right part for less than $40 and the repair shop installed the part on the rack for free
I was not happy with Part Select! Part Select cost me time and money and didnt get the job done
I was not happy with Part Select! Part Select cost me time and money and didnt get the job done
Other Parts Used:
-
Susan from VICKSBURG, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper Rack Wouldn't Close
Hardest part was figuring out how to release and remove upper rack as mine did not match the instructions. After that is was tricky but not overly difficult. The instructions on-line did not make sense, but it all was fairly intuitive process. Take some before pictures, lol. Dishwaswasher works great.
Other Parts Used:
-
Susan from SEATTLE, WA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I never could get the Upper basket removed because I could not take half the retainers
Upper basket removed because I could not take half the retainers
Other Parts Used:
-
Juanita from OOLTEWAH, TN
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Filter By Rating:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Pamela M - October 19, 2022
Quick response
Part came quickly with a link to a how-to video. Worked great
John B - June 30, 2022
Exactly what we ordered
No problem installing, fixed the issue
Heather P - March 16, 2022
Great service
Easy to find the part I needed on parts diagram. Order received within a couple of days and part was exactly what I needed. Would definitely order from PartSelect again!
Robert V - November 17, 2021
part
no issues with the part as received.
Joshua R - June 27, 2020
Extremely expensive, and should be part of unit.
We were very displeased that after only 6 years, the cheap plastic parts in our very expensive KitchenAid dishwasher began crumbling. Imagine our displeasure, then, to find out how expensive the parts would be to replace! This clip is a pet of a larger bracket system for the upper rack, and while the upper bracket only costs $35, it requires two unique clips, both of which also needed replacing due to brittle plastic, and both of which were ALSO $35 each. And that’s just for one side of the rack! So, all told, to replace the plastic brackets on one rack of a relatively new, high end dishwasher, it cost $250 with taxes And shipping. But at least it was easy to install, I guess.
Faye M - January 14, 2019
Easy to replace with YouTube
I am very pleased at how fast I’ve received the part. YouTube video very helpful. My only disappointment is how cheaply the design of the upper rack assembly is. We have only had our dishwasher less than 3 years and have experienced this breakage. The hot water and heat from the drying cycle drys out the plastic. Never had this problem with past dishwashers of other makes.
Colin W - August 30, 2018
Parts came exactly as ordered.
This part was one of three that were required to fix my dishwasher. All arrived in good order and I managed to get everything up and running in no time. I had no choice. I was faced with the prospect of washing my dishes by hand ... yikes!
Stephen C T - August 27, 2018
Dish washer positioner part replaced
Right part for the job received very quickly - much appreciated
Related Parts
$57.59
$50.33
Dishwasher Dishrack Adjuster
$50.33
PartSelect Number: PS11750092
Sold individually.
This dishrack adjuster is for dishwashers.
Dishrack adjuster lets you change the height of the dishwasher's upper rack.
Wear work gloves to protect your hands when installing this part.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11750093
Manufacturer Part Number: WPW10195840
Manufacturer Part Number: WPW10195840
Brand
Model Number
Description
Kenmore
66213293K112
Dishwasher
- Kenmore Dishwasher Model 662.13293K112 (66213293K112, 662 13293K112) Parts
Kenmore
66512833K311
Dishwasher
- Kenmore Dishwasher Model 665.12833K311 (66512833K311, 665 12833K311) Parts