Replacing your General Electric Dishwasher DRAIN TUBE Assembly
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric, Haier.
Part# WD24X10062 replaces these:
AP5657439, WD24X24650
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Romeo
October 8, 2021
I been an 8-foot drain hose replacement.
For model number GSD3220Z01BB
Hello Romeo, Thank you for contacting us. Sadly, the part you are requesting we do not have listed. We strongly recommend you contact the manufacturer, as they would have this information in their system. Ask them for the part number you require and contact back to see if it is something we carry. We hope this helps.
Was this helpful?
Thank you for voting!
Gregory
February 2, 2023
Does the drain hose have a check valve. I have dirty water coming in after cycle.
For model number cdt765ssf1ss
Hello Gregory, We are glad you asked! Your Unit has a Turbidity Sensor PS7783361. Turbidity sensors are a piece of equipment used to measure the cloudiness or haziness and the concentration of total dissolved/suspended solids of a solution. Also, the drain hose does not have the check valve and that would be likely part the pump motor which is PS11762952. Thank you and have a great day.
