Front Suspension Rod & Spring Assembly - Blue Specifications
Sold individually. This part is used to keep your tub upright and somewhat level during the different cycles.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
General Electric, Hotpoint.
Part# WH16X10158 replaces these:
AP5632455
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Thomas
December 22, 2017
Only when the tub is filled with water and the tub is going thru the wash or rinse cycle, it makes a scraping noise. I pulled the cabinet apart and inspected it. I noticed that with the weight of the water, the tub sinks and the pulley on the bottom rubs on the bottom portion of the cabinet. Since the suspension springs seem to be the only thing holding the tub up, i'm pretty confident replacing them would be the fix. But do i need to replace all 4 of them as a set, because it only seems to be the front ones since the tub, once filled with water, shifts to the front?
For model number GTWP1800D0WW
Hi Thomas,
Thank you for your question. It is always recommended that you replace all of your springs when you are replacing your suspension. Good luck with your repair.
12 people found this helpful.
Was this helpful?
Thank you for voting!
RANDY
September 13, 2017
I bought this washer 1/13, recent load got shifted and made machine walk. Now it makes a loud clinking noise when it agitates back & forth, any idea what broke?
For model number GHWN4250D0WW
Hello Randy, thank you for contacting us. You would need to remove some panels and inspect the washer to determine what part could have come loose or broke. It's possible it could be one of the suspensions rods. It could also be the tub dampening straps. These support the wash tub and reduce vibration by keeping the tub at the center of the cabinet. If these came off it would be unbalanced and shake and move and make a lot of noise. Hope this helps!
Hi Daniel, Thank you for the question. This part is used to keep your tub upright and somewhat level during the different cycles.If the appliance is shaking and jumping Haroun then these will need to be replaced. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Steve
December 5, 2018
Extreme movement of tub in spin cycle to point of banging against sides. 4 rubber straps, counter balance block and 4 suspension rods are all intact.
For model number GTWN4250D0WS
Hello Steve, thank you for your question. We would recommend checking the balance ring that is on top of the tub. This part has liquid in it that helps balance the tub when it is spinning. Part number is WH45X10114. I hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jim
December 16, 2023
how many suspension rods are there?
For model number HSWP1000M4WW
Hi Jim,
Thank you for your question. You will need 4 suspension rods, 2 for the front and 2 for the rear. The part number for the front suspension rod is PS3654190 and the part number for the rear suspension rod is PS3654191. The rods are sold individually. We hope this helps!
This part is a replacement socket rod support for your washer. The socket rod support is found at the top of the washer frame in the front part of the washer. It supports the suspension rod, so the rod can prevent the tu...
Your washer uses 4 tub dampening straps. It is recommended to replace all 4 at the same time. They keep the tub in the center of the cabinet and are sold individually.
