Sensor Assembly
Fits your LDS5540BB Dishwasher!
$43.35
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your LDS5540BB Dishwasher!
PartSelect Number
PS3529176
Manufacturer Part Number
6501DD2001A
Manufactured by
LG
Troubleshooting
This part works with the following products:
Dishwasher.
This part works with the following products:
LG.
Part# 6501DD2001A replaces these:
AP4457564, 6501DD2001A, 6501DD2001B
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tom
April 7, 2022
HE error. I ohm tested the heating element Okay. Is there a heating sensor or thermistor and a heating relay that can be purchased. Thanks
For model number LDF7551ST
Hi Tom,
Thank you for your question. The HE error code usually means that there is an issue with the heater circuit. There is no sensor or thermistor listed for your washer. If you have tested the heating element and it tested okay, try adjusting the temperature of the water coming into the dishwasher to see if this resolves the issue. If not, try resetting the dishwasher but cutting power to it for 10 seconds and plugging it back in. Then start a new cycle to see if the code will appear again. If it does, check for any loose or damaged wiring. Also check the electronic control board. It may have a burnt relay. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Pamela
May 5, 2024
Gives HE error. Doesn’t dry the dishes. Replaced the element. Not fixed. Is the temp sensor the next recommended replacement?
For model number LDS5540ST
Hello Pamela, thank you for reaching out. According to our research, the error code HE means a heater error. This error occurs when the unit is unable to heat the water or the water was overheated above 149 degree Fahrenheit. As you have already replaced the heating element and still facing the issue, we would recommend replacing the main control board, part number PS7792746, to solve the problem. Your model does not have any temperature sensor. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3529176
Manufacturer Part Number: 6501DD2001A
Manufacturer Part Number: 6501DD2001A
Brand
Model Number
Description