Replacement dishwasher drain hose. Per the manufacturer if the drain hose being replaced does not have the vent tube going to the water inlet assembly a new water inlet will be needed.
$138.68
In Stock
Order within the next 9 hrs and your part ships today!
Order within the next 9 hrs and your part ships today!
Questions And Answers for LDF6920WW
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Carol
February 28, 2020
I've had my dishwasher since 2010, the upper dish rack needs to be replaced. Can i order one?
For model number LDF6920WW
Good Day Carol. Thank you for your question in regards to your unit (Model Number LDF6920WW). Based on our research the PartSelect Number for the Upper Rack Assembly that is compatible with your unit is PS3521811. You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
My dishwasher is leaking at the bottom of the door. Is there more than one gasket? One on tub & one on bottom of door?
For model number LDF6920WW
Hi Howard,
Thank you for your question. If the dishwasher is leaking at the bottom of the door, the door gasket may be worn or damaged. The part number listed under your model number for the door gasket is PS3522654. To place an order for the part you may order it either online, by visiting our live chat sessions, Monday to Friday from 8AM to 4PM EST, or by calling our customer service line at 1-888-738-4871 and anyone will be happy to assist you. We hope this helps. Thank you and have a great day.
Door leaking from the bottom is there a replacement part for the bottom door seal? Also instructions for replacing it?
For model number LDF6920WW
Hello and thank you for writing.
In your model there is no bottom seal, you would have to replace the door liner assembly PS3524423 to fix this problem. We hope this helps. Please contact us anytime if you require further assistance.
Dead no lights. Power to control module. Door switches good.
For model number LDF6920WW
Hello Ed, thank you for your question. We would recommend testing the electronic board part number PS3529872 and the display panel on the unit which is PS3529877. I hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Simple, removed screws securing machine in the cabinet, then pull the unit out of the cabinet space about 10 inches. Springs are accessible within this extension. You need strong hands to extend the springs and attach them. Once attached, push machine back in place and re-install the anchor screws. In my situation, only one spring was broken, so the attached side revealed the correct slot to place the hook on the top position, the bottom position has a plastic lead for the spring, and that lead is attached to a rope to the door hinge. Note: Replace BOTH springs, even if only one is broken.
Pull the dishwasher out from underneath the countertop took 2 minutes unscrewed the panel on the side one minute put the connector on one minute screwed the panel back on 1 minute put the dishwasher back underneath the counter two minutes very easy job