Replacement dishwasher drain hose. Per the manufacturer if the drain hose being replaced does not have the vent tube going to the water inlet assembly a new water inlet will be needed.
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kent
January 16, 2020
Try to run a load of dishes had run some the night before no problems when i tried to power it up to set it to wash nothing happened. When i jiggled the door something made power come on maybe a loose wire. I start running it a few minutes later it shut down and this time it wouldn’t power back up. When i jiggle the door again thought i saw a little spark at the bottom so i unplugged it and left it.
For model number LDF6920ST
Hi Kent, thank you for your question. It sounds like you may need to replace the door latch/lock: PS3522841. That part will not allow your power to come on if it believes that the door is open in any way. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Paul
January 26, 2020
Just got the error code le while dishwasher was running. Shut off the breaker and restarted the cycle and got the same code. Error code said its either the wiring harness or the motor. It's been much noisier recently so i'm guessing its the motor. Is there any way to tell which it is for sure? Tried to see what a motor would cost and found multiple motors listed. What motor does this code refer to?
For model number LDF6920ST
Hello and thank you for writing.
The LE error code on the LG dishwasher display is an indication of a MOTOR ERROR. The 5 issues that may cause this fault code is a wiring problem (the most common reason for LE error), the impeller of the washing pump is locked, the rotor of the washing motor is locked, the blade is locked, or the PCB main control board is faulty. According to our database, the model number you provided is just a portion of a model number with multiple possible variations. To ensure that we recommend parts that will work for your model, please check your information again; you will need to provide us with the full model and serial numbers located on the sticker on the unit itself.
Once we have that information, we would be happy to find the part you need. We are looking forward to your reply, please always notate the model number. Thank you.
Was this helpful?
Thank you for voting!
Ed
April 27, 2023
My door just stopped closing. The latch isn’t working.
For model number LDF6920ST
Hi Ed, thank you for reaching out. The issue is probably due to the door hinge cable assembly, part number PS3524406. We hope this helps!
Dishwasher makes growling sound during the whole cycle, but still cleans dishes. What do you feel is the problem and what part do I need?
For model number LDF6920ST
Hi Mark, thank you for reaching out. Based on the description, we have concluded that the issue is with the sump assembly, part number PS3532844. We would recommend replacing the sump assembly to fix the issue. Glad to be of assistance!
Hi Heather, thank you for contacting us. We would suggest you checking the door hinge spring, part number PS3524564. It adds tension to the door through the door hinge to keep it from opening too fast. You may need to replace it to fix the issue. We hope this solves your problem!
Simple, removed screws securing machine in the cabinet, then pull the unit out of the cabinet space about 10 inches. Springs are accessible within this extension. You need strong hands to extend the springs and attach them. Once attached, push machine back in place and re-install the anchor screws. In my situation, only one spring was broken, so the attached side revealed the correct slot to place the hook on the top position, the bottom position has a plastic lead for the spring, and that lead is attached to a rope to the door hinge. Note: Replace BOTH springs, even if only one is broken.
Relocated dishwasher to garage and set it up on a table (easier on back having it elevated). Connected temporary water supply, drained to a bucket.
Removed pump, and found it severely corroded, indicating leakage from pump shaft seal in sump. Inspection of seal revealed excessive wear, requiring sump replacement (there is no way to replace just the pump seal). I have photos of old pump & sump, but I don't see any way to upload them.
Removed sump from dishwasher with all components attached, swapped components over to new sump, reinstalled sump (with new sump gasket) and started dishwasher to check for leaks. The heater was the most difficult component to swap. Reinstalling the sump assembly was tricky.
