Locking Pin 4774FR3118B

Official part for LG, Kenmore

Really Easy 

More than 2 hours 

3523451-1-M-LG-4774FR3118B-Locking Pin
Part Location Diagram of 4774FR3118B LG Locking Pin
See part K611 in the diagram
( Grid squares measure 1x1 inch )
3523451-1-S-LG-4774FR3118B-Locking Pin 3523451-2-S-LG-4774FR3118B-Locking Pin 3523451-3-S-LG-4774FR3118B-Locking Pin Part Location Diagram of 4774FR3118B LG Locking Pin
Proudly Canadian
OEM badge Official OEM Part
$13.15
Special Order

Part Fit Check - Make Sure it's a Match.

Where to find your model number

About This Part

What it does. Why it matters. Everything you need to know for an easy fix.

Locking Pin Specifications

The locking pin is used to hold the shock absorber on the washer. There is a pin used at the bottom and top of the shock absorber. Sold individually.
Part #4774FR3118B
Manufactured by LG for LG, Kenmore

You May Also Need

Because heroes deserve fewer surprise re-installs.

$57.15
In Stock
$47.25
In Stock
Shock Absorber – Part Number: 383EER3001G
Shock Absorber
Part #383EER3001G
$59.35
In Stock
Shock Absorber – Part Number: 4901ER2003A
Shock Absorber
Part #4901ER2003A
$46.15
In Stock
$26.85
Special Order
$34.95
In Stock
$29.95
In Stock
$35.15
In Stock
$35.95
In Stock
$35.15
In Stock

Genuine OEM: Original Parts. Lasting Repairs.

Because quality isn't optional.

OEM stands for Original Equipment Manufacturer. This means that the company who made your appliance is also supplying the replacement part.

How Buying OEM Parts Can Save You Time and Money
Features OEM Generic
Genuine brand name
Guaranteed to fit
Superior Quality
Long term value

About this fix

Common problems and models this part fixes.

Really Easy 

More than 2 hours 

Rated by verified customers

Works with the following products:
  • Washer
  • Washer Dryer Combo
  • Dryer
Part# 4774FR3118B replaces these:
AP4437237, 1267588, 4774FR3118B

Repair Tips

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!

Really Easy 

More than 2 hours 

Average repair rating from 1 real customer like you

Sort by:
  • 1

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sorry, we couldn't find any existing installation instruction that matched.
Bearing seal out causing bearings to get wet and very noisy
70 of 74 people found this instruction helpful.
  • Todd from STOCKTON, KS
  • Really Easy
  • More than 2 hours
  • Nutdriver, Pliers, Screw drivers, Socket set
Watched a short video to figure out to remove panels. After panels were off I removed as much as I could from the inside of the machine. This was not completely necessary however for an extra half hour it made inspection, cleanup and removal of tub housing out the front of the machine much easier. Once out, I split the two halves of the outer basin and sprayed the spider shaft with penetrating oil. Using a brass drift I did have to get a bit aggressive to drive spider shaft out, then I used a heavy metal punch to hammer out the bearings. For those who may not know using brass or a soft metal will keep from damaging reusable parts. At this point it was cleanup time, with dish soap I scrubbed the two halves of the outer basin and the wash basin itself then used emery cloth on the bearing casing and spider shaft. I am a firm believer if u take the time to cleanup properly things go back together much easier. At this point I began to reassemble, replacing tub bearings and seal, the wash basin then putting the two halves of the outer basin back together. I strongly recommend replacing gasket for the halves of the outer basin, for as much as it takes to get there it is money well spent to up the chances of a leak free system. Now with the wash tub back together it was time to reset the tub and hook everything back up. I skipped a lot of steps but if a person pays attention, takes pictures if they have to, even numbers lines with a sharpie it is a very easy repair. Very easy but very time consuming. I am DIY’er, in all I spent about ten hours over two days to do this job. Thus being said I am very particular spent a lot of time cleaning, scrubbing looking at as many wear points and checking for rubbed wires. Hope this helps someone out there, definitely not a strong writer or like doing it. Oh one other thing, I ordered the shocks on the bottom side of wash tub just because I guess not thinking they were bad just thinking I could help tune it up. Was surprised to find the old ones were completely shot, was glad I ordered new ones. After repairs, noise is gone and machine is quiet again. Thank you, your website is very easy to find parts and order.
Read less
Was this helpful?
Thank you for voting!
  • 1

DIY Questions and Expert Answers

Be the first to ask our experts a question about this part!

This Part Also Fits These Models

Don't see your model? Use our Fit Checker to confirm!

Check Part Fit
Part #4774FR3118B
Brand
Model Number
Description
LG
048231017473
Washer - Model Lg 048231017473.Abwevus Washer – Common Parts And Diagrams
LG
40002
Washer
LG
40021
Washer - LG Washing Machine Model 40021 Parts
LG
40121
Washer
LG
40131
Washer
LG
40141
Washer
LG
40147
Washer
LG
40262
Washer
LG
40272
Washer - LG Washing Machine Model 40272 Parts
LG
40277
Washer
LG
40315
Washer
LG
40318
Washer - LG Washing Machine Model 40318 Parts
LG
40441
Washer - LG Washing Machine Model 40441 Parts
LG
40445
Washer
LG
40448
Washer - LG Washing Machine Model 40448 Parts
LG
40512
Washer - LG Washing Machine Model 40512 Parts
LG
40518
Washer - LG Washing Machine Model 40518 Parts
LG
40776
Washer
LG
40996
Washer
LG
41002
Washer - LG Washing Machine Model 41002 Parts
LG
41003
Washer - LG Washing Machine Model 41003 Parts
LG
41022
Washer - LG Washing Machine Model 41022 Parts
LG
41025
Washer
LG
41028
Washer - LG Washing Machine Model 41028 Parts
LG
41029
Washer - LG Washing Machine Model 41029 Parts
LG
41072
Washer - LG Washing Machine Model 41072 Parts
LG
41073
Washer - LG Washing Machine Model 41073 Parts
LG
41172
Washer - LG Washing Machine Model 41172 Parts
LG
41182
Washer - LG Washing Machine Model 41182 Parts
LG
41262
Washer - LG Washing Machine Model 41262 Parts
Locking Pin
$13.15
Special Order
✖
Stock Status

In Stock

Item is in stock and is estimated to be delivered in 2-3 business days via Standard Shipping.

On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.