Upper Dishrack with Wheels

replacing dishrack was simply removing old and sliding new onto track. however, removing and reinstalling water dispenser blade mounted on bottom of existing rack to new rack required much more time and effort .I needed to use flat screwdriver to pry plastic clamps apart and then a pair of channel locks to release assembly from original rack. It took some effort to finally accomplish . I believe all models that use this replacement rack would have this same issue with the dispenser blade and instructions for re-installation should accompany the new rack or better yet, new blade should be included on rack for those not familiar with using tools.

Upper dishwasher rack easily removes off roller arms with upward tilt. Upper water tube/spray arm assembly unsnap from old rack and snaps onto new rack... no tools needed. Lucky enough new height adjustment levers come with new rack and with firm push they snap into place also. Stemware holder also unsnapped off old rack and then snapped onto new rack. Upper rack returned to dishwasher with upward tilt and threaded back on roller arms. Easy peasy. Done.

The upper dish rack replacement is a direct replacement/exact fit. The only part needed to move from old/worn dish rack was the sprayer/tube assembly that is attached to bottom of dish rack. No tools required. Just push out and replace on new part.