Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tana
October 30, 2021
Ice is building up behind the plastic defrost panel as well as water building up and feeding under the deli drawer, then water dripping onto floor. The drain tube under plastic defrost panel also is frozen. Should we replace the defrost unit as well as the bi metal component?
For model number PFSF6PKXCWW
Hello Tana, Thank you for the question. We suggest testing the Bimetal Defrost Thermostat. The best way to do this is to remove the thermostat from the refrigerator so you can control the temperature of the sensor. You can let the sensor warm up to room temperature. With the sensor warmed up to room temperature the sensor should read approximately 6.2K Ohms at 68°F. With the thermistor submerged is a glass full of ice water, the sensor should be very close to 32°F which should read approximately 16.3K Ohms. If the values that you are getting are far off from these readings, then the sensor is bad and should be replaced. If the Thermoset is good you can test the Defrost Heater. You should get an approximate reading of 10 to 150 ohms. We hope this helps!
Hi, I don't know where to start troubleshoot for my problem with a bunch of ice got build up behind the plastic cover, I think it's called the evaporator (the aluminum tube with fins on them). I heard on youtube to test the resistor(s) but don't know how. What is the ohms for them and don't know which one because there are 4 or 5 of them. Can you please advise? Thanks in advance for your support..
For model number GFSS6KEXASS
Hello John, Thank you for the question. Very sorry but we are not listing a resistor, but this sounds like a defrost issue. I suggest checking the defrost heater, PartSelect Number PS2340403 for continuity and the Sensor, PartSelect Number PS2374749 for 5K ohms of resistance at room temperature. Hope this helps!
Hello, My evaporator coils are freezing up and there's water that drips into the bottom drawer of the fridge. The fridge does not have any issues with cooling as the temp reaches the setting. I'm thinking it's a defrost issue but am unable to find the correct part to replace. Can you assist?
For model number GFSL6KEXALS
Hello Alfredo, Thank you for the question. We suggest testing the Defrost Heater, PartSelect Number PS2340403. The Defrost Heater should read approximately 120 ohms. You can also test the Defrost Bimetal Thermostat. The best way to do this is to remove the thermostat from the refrigerator so you can control the temperature of the sensor. You can let the sensor warm up to room temperature. With the sensor warmed up to room temperature the sensor should read approximately 6.2K Ohms at 68°F. With the thermistor submerged is a glass full of ice water, the sensor should be very close to 32°F which should read approximately 16.3K Ohms. If the values that you are getting are far off from these readings, then the sensor is bad and should be replaced. We hope this helps!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2322740
Manufacturer Part Number: WR02X12603