Part Location Diagram of 12001676 Whirlpool Surface Burner Receptacle Kit
See part 34 in the diagram
Replacing your Magic Chef Range Surface Burner Receptacle Kit
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Surface Burner Receptacle Kit

★★★★★
★★★★★
21 Reviews
$20.96
  In Stock
PartSelect Number PS1570190
Manufacturer Part Number 12001676
Manufactured by Whirlpool
Product Description

Surface Burner Receptacle Kit Specifications

This kit comes with one ceramic block, metal bracket, wires, and hi-temp wire nuts.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Magic Chef Range Surface Burner Receptacle Kit

Replacing your Magic Chef Range Surface Burner Receptacle Kit
Troubleshooting
This part fixes the following symptoms:
Element will not heat | Will Not Start
This part works with the following products:
Range, Cooktop, Microwave Oven Combo.
This part works with the following products:
Magic Chef, Maytag, Crosley, Jenn-Air.
Part# 12001676 replaces these:
AP4009015, 400645, 12001676, 04100394, 0B03600499, 0R01500199, 0R01500299, 0R01500399, 0R01500599, 12001676, 12001676VP, 12200010, 14001102, 14222603, 1430-306, 1430-306K, 1430293, 1430306, 1430306K, 1657-215 ... Show more , 1657-222, 1657-226, 1657215, 1657222, 1657226, 4381752, 4381814, 4381831, 5-60468, 5-70152, 53-003, 560468, 561158, 570152, 7-0125, 7-0154, 7-12143, 7-12361, 700125, 700125K, 700154, 712143, 712361, 7401P036-60, 7401P040-60, 7408P016-60, R0167047, RR110, Y04100394, Y0B03600499, Y0R01500199, Y0R01500299, Y0R01500399, Y0R01500599, Y712143, Y712361 Show less
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
21 Reviews
4.0
Filter By Rating:
  • 5 Stars
    12
  • 4 Stars
    3
  • 3 Stars
    2
  • 2 Stars
    1
  • 1 Star
    3
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3
Customer Repair Stories
 Average Repair Rating: 3.7 / 5.0, 31 reviews. What's this?
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Stove top element not working due to bad receptacle.
Turned off the power at the breaker box, cut the wires approximately 5 inches from the bad receptacle and removed it after removing one screw. Stripped back the wires about 1/2 inch and attached the new wires with the ceramic wire nuts provided and secured the receptacle back in place with the new screw provided in the kit.
My sister's husband wanted to scrap the whole range but I repaired it with $14.00 worth of parts.
The element is working great now.
Whenever I need appliance parts again I'll use partselect.com.
Other Parts Used:
  • Richard from Carthage, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
191 of 208 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
one of my burners would only work half the time, and you had to wobble it to make it work
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, connected the new element using the wire caps, and finished bye rescrewing the element backinto place.
Other Parts Used:
Chrome Drip Bowl - 8 inch Drip Bowl - 6 Inch
  • cindy from Sebeka, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
138 of 265 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The heating element would not adjust to the knob settings. The element was always at maximum heat, even when I set the knob on minimum heat.
This was easier than putting in a new light switch. The old receptacle would not make the necessary adjustments to the heat element to maintain the desired temperature. Even when I turned the temperature knob to "minimum", the heat element would bun at the maximum temperature. I pulled the element from the Receptacle, raised the stove top to expose the receptacle and wiring. My stove was too heavy to pull from the wall, so I had to go to the breaker box to flip off the breaker. I returned to the stove and snipped the non working receptacle (with a wire cutter) and attached the new receptacle with the ceramic wire nuts, that came with the assembly. I turned the electric-breaker back on, and tested the heat element. The element will now make the on/off adjustments on each temperature setting, to maintain the correct heat.
I ordered two receptacles because I wanted a spare. I do a lot of baking during special-day dinners, for my family members... and due to the age of my stove, I bought the bake element as a "back up" if the present Bake-element burns out.
Other Parts Used:
Bake Element
  • Vernell from Memphis, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
32 of 36 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wanted to "renew" cook top
The drip pans, burner knobs and electric surface elements are easily removed and replaced. The new receptacles for the burners were NOT easy to replace, but electricians were on hand to install when they replaced the cook top into the new counter top. Even the electricians had to read the instructions - and remove the control panel to replace one of the receptables. Looks like a new cook top.
Other Parts Used:
Surface Burner Knob Delta Frame Surface Unit - 8 Inch Delta Frame Surface Unit - 6 Inch Drip Bowl - Chrome - 8 Inch Drip Bowl - 6 Inch
  • Lucille from Mattoon, IL
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    15 - 30 mins
32 of 42 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dead element; broken switch shafts; light out
This was a piece of cake since the parts were a perfect replacement. I took the element apart and replaced the two receptacles by cutting the old wires and using the included wire nuts to splice the wires. The two switches were easily replaced by carefully connecting the wires like they were hooked up on the old switches. The indicator light was also easily replaced, although snapping the lens into place seemed to take a lot of force (I was afraid that I might break it). All in all, quite easy.
Other Parts Used:
Infinite Switch Indicator Light Kit
  • Robert from Gainesville, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers
14 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old worn out parts (burners and drip pans)
replaced parts... the burner receptacle was the only part requiring tools. 10 min. fix.
Other Parts Used:
Porcelain Drip Bowl - 6" Porcelain Drip Bowl - 8" - Black Trim Ring - 8" Trim Ring - 6" Eight Inch Surface Element
  • Lisa from Theresa, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
12 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner was out but the burner coil worked on onother burner
Replaced receptacle but it was not the problem. After further inspection I believe that the problem is the switch. The switch is on order now from Part Select.
Other Parts Used:
  • Richard from Orange, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
10 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Both the 8'' burner and the vent fan didn't work.
1st-turned off breaker, 2nd- took out the two screws that hold the control panel and lifted it up so I could remove the surface unit switch,3rd- removed wires from old switch and securing nut and removed old switch,4th- installed new switch and plugged in wires, then turned on breaker to see if burner would work and it did. 5th-turned off breaker again and removed the wires from the fan switch and used nut driver to remove retainer nuts,6th-installed new fan switch and plugged in wires, 7th- put control console back in place and the two screws that hold it in place. Turned breaker back on and everything worked.Didn't use the burner receptacle or burner.
Other Parts Used:
Delta Frame Surface Unit - 8 Inch Surface Unit Infinite Switch Kit Rocker Switch - White
  • Walter from N. Richland Hills, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
9 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burner receptacle burned out
Worst part of the job was removing the old screws that held the two old rectecles in place for the two burners I repaired. Once the screws were removed cut the wires stripped them and used the porceliean wire nuts provided with the kit. Easy job and good instructions.
Other Parts Used:
  • Michael from N. Haverhill, NH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burned out receptacle
Searched for parts and found PartsSelect to substantially underprice Sears for same items. removed old recept. with a screwdriver, no problem, had a little difficulty getting new wires attached as hand wouldn't fit under burner area and the wires were short. Also the recept. bracket screw hole was a little tight for the screw so I had to "stretch" it out a bit. Replacing drip pans and rings was a simple change out of the old, no tools needed for that. Overall an easy job.
Other Parts Used:
Chrome Trim Ring - 6 Inch Chrome Trim Ring - 8 Inch Drip Bowl - Chrome - 8 Inch Drip Bowl - 6 Inch
  • Michael from Penryn, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
6 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

10 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jack
August 26, 2017
The red warning light that tells you a burner is on will not shut off even when all burners are off.
For model number MER6555
PartSelect logo
Hi Jack, Thank you for your inquiry. If your surface burner indicator light is not turning off after the burners have been turned off than the issue is with one of the burner switches. You will need to check to see which switch is causing the issue. To test to see which switch is causing the issue, unplug the stove first. Each switch has a power line going to it. Unplug each power line from the switch and do a process of elimination to see which switch is causing the issue. I hope this helps. Thank you and have a great day!

15 people found this helpful.

Was this helpful?
Thank you for voting!
Sandra
March 6, 2019
Will this part work for GE electric ranges.
For model number J BS07 M1CC
PartSelect logo
Hello Sandra, thank you for your question. Unfortunately, that part won't work. The receptacle kit for your model is PartSelect Number: PS783534. Please enter the part number into the site for current price and availability. Good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Archie
June 27, 2019
The 5 pin section that clicks in the unit where the BBQ grill works has one pin missing after taking out to clean? The baby unit works fine, but the cook top section with 5 pins dont
For model number c206w-c
PartSelect logo
Hello Archie, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS1988157. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Cathy
July 16, 2019
What is the part # for the 8” range burner and the receptacle replacement kit. -and the cost of each
For model number S160
PartSelect logo
Hi Cathy, thank you for your question. You will have to give us the model number of your cartridge that holds the burners for us to pull up the part information for it. Unfortunately we cannot just use the model number of your range. Once you have that just resubmit your question with the cartridge model number and we can find you the parts. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Debra
May 25, 2022
Is this part made of ceramic or plastic?
For model number MER551AAW
PartSelect logo
Hello Debra, Thank you for your inquiry. We show this part is made of plastic and metal. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Jeri
April 5, 2023
The large burner front right gets so hot on medium setting I have to turn the burner off. What do I need to fix this issue? Thank you for your help
For model number MER5530AAW
PartSelect logo
Hello Jeri, thank you for contacting us. The issue arises due to a faulty burner switch, as it controls the heat to the element. To resolve your issue, you may need to replace the burner switch, part number PS11744487. We hope this helps

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Tom
September 15, 2022
I purchased a surface burner element kit for one of the small burners on my Maytag stove. Part number is PS1570190. When installing, that it is slightly larger than the one I am replacing. Is it ok to install it? Will it be compatible? Any help is appreciated .
For model number CES3540AACx as
PartSelect logo
Hi Tom, thank you for reaching out. We have researched your model number and found that part number PS1570190 will fit your model. It is compatible with your model number and you can install it. We hope this helps, good luck with this repair.

Was this helpful?
Thank you for voting!
Ram
November 18, 2021
Does this surface burner receptacle kit fits the Amana stove model # AER5522VCSO.
For model number AER5522VCSO
PartSelect logo
Hello Ram, thank you for writing. No, the part you had chosen is not compatible for your model. The correct part for your model number is Receptacle Kit part PS389217. We hope to hear from you soon.

Was this helpful?
Thank you for voting!
Related Parts:
TERESA
October 12, 2023
LEFT FRONT BURNER GOES RED HOT IF TEMP IS ABOVE 4
For model number FCE10610W
PartSelect logo
Hi Teresa, thank you for your inquiry. If the front left burner is getting hotter than the dial indicates, then you will need to replace the front left burner's infinite switch. The part number for it is PS11744486. We hope this solves your problem!

Was this helpful?
Thank you for voting!
Related Parts:
Tai
November 8, 2021
What's the gage size on the electrical wire on this kit?
For model number 2375/90ers
PartSelect logo
Hello Tai, Thank you for the question. Very sorry but the manufacture has not provided us with the Wire Gauge for the Receptacle Kit. For more specialized assistance or to speak with someone about this, I would suggest calling the manufacturer of the appliance directly. We hope this helps!

Was this helpful?
Thank you for voting!
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1570190
Manufacturer Part Number: 12001676
Brand
Model Number
Description
Admiral
1058AF-CW
Range - Electric
Admiral
1058AF-CZ
Range - Electric
Admiral
1058WF-CW
Range - Electric
Admiral
1058WF-CZ
Range - Electric
Hoover
1151AA-36
Cooktop
Hoover
1151AA-36G
Cooktop
Hoover
1151AD-30
Cooktop
Hoover
1151AD-36
Cooktop
Hoover
1151AH-30
Cooktop
Hoover
1151AL-36G
Cooktop
Hoover
1151WA-36
Cooktop
Hoover
1151WA-36G
Cooktop
Hoover
1151WD-30
Cooktop
Hoover
1151WD-36
Cooktop
Hoover
1151WH-30
Cooktop
Hoover
1151WL-36G
Cooktop
Magic Chef
1500PAA
Range
Magic Chef
1500PAW
Range
Magic Chef
1500PRA
Range
Magic Chef
1500PRW
Range
Maytag
156-1W
Range - Maytag Range/Stove/Oven Model 156-1W/1X (1561W/1X, 156 1W/1X) Parts
Maytag
15A-1
Range - Maytag Range/Stove/Oven Model 15A-1 (15A1, 15A 1) Parts
Maytag
15A-2
Range - Maytag Range/Stove/Oven Model 15A-2/1X (15A2/1X, 15A 2/1X) Parts
Magic Chef
15GA-1
Range
Magic Chef
15GA-1-94
Range
Magic Chef
15GA-1-GG
Range
Magic Chef
15GN-1
Range
Magic Chef
15GN-1-94
Range
Magic Chef
15GN-1-GG
Range
Magic Chef
15GY-1
Range
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service