156-1W (1X) Maytag Range - Overview

Diagrams for 156-1W

See every part. Know exactly what you need.

Parts for the 156-1W

$27.20

Surface Burner Receptacle Kit

★★★★★

(30)

Part #12001676

This kit comes with one ceramic block, metal bracket, wires, and hi-temp wire nuts.

$38.62

Standard Y-Frame Range Surface Burner

★★★★★

(2)

Part #WP660532

The manufacturer suggests replacing the receptacle at the same time.

$119.88

Surface Element Kit

★★★★★

(2)

Part #4392061

This kit includes two 8" elements, two 6" elements, four receptacles and any remaining hardware needed for installation.

$104.98

Economy Y-frame Surface Unit - 8"

Part #WPY04000035

This electric range economy Y-frame surface element measures eight inches and has five turns. It carries 2100 watts and is used on some electric ranges. The center medallion is chrome.

SPRING

Part #7803P001-60

DISCONTINUED

Part #7406P001-60

ELEMENT BA

Part #7406P008-60

KNOB

Part #12500021

HINGE, OVEN DOOR (RT)

Part #3418D076-34

N/L/A 07/09/03

Part #1867211

Switch

Part #1832321

Switch

Gasket

Part #7201P010-60

Gasket

Common Symptoms of the 156-1W

How this model fails, and the parts that fix it.

Element will not heat

Fixed by
these parts

Videos related to models starting with 156-1W

Watch our pros, then fix it yourself.

Replacing the Surface Burner Receptacle Kit

Replacing the Standard Y-Frame Range Surface Burner

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Stove top element not working due to bad receptacle.

196 of 216 people found this instruction helpful.

Richard from Carthage, NC
Really Easy
Less than 15 mins
Pliers, Screw drivers

Turned off the power at the breaker box, cut the wires approximately 5 inches from the bad receptacle and removed it after removing one screw. Stripped back the wires about 1/2 inch and attached the new wires with the ceramic wire nuts provided and secured the receptacle back in place with the new screw provided in the kit.
My sister ... Read more

Read less

Was this helpful?

Burner was out but the burner coil worked on onother burner

10 of 10 people found this instruction helpful.

Richard from Orange, CA
Easy
15 - 30 mins
Pliers, Screw drivers

Replaced receptacle but it was not the problem. After further inspection I believe that the problem is the switch. The switch is on order now from Part Select.

Was this helpful?

burner receptacle burned out

8 of 9 people found this instruction helpful.

Michael from N. Haverhill, NH
Easy
15 - 30 mins
Screw drivers

Worst part of the job was removing the old screws that held the two old rectecles in place for the two burners I repaired. Once the screws were removed cut the wires stripped them and used the porceliean wire nuts provided with the kit. Easy job and good instructions.

Was this helpful?