Part Location Diagram of WPY700854 Whirlpool Surface Burner Knob
See part 1 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Surface Burner Knob

★★★★★
★★★★★
4 Reviews
$39.84
  In Stock
PartSelect Number PS11757562
Manufacturer Part Number WPY700854
Manufactured by Whirlpool
Product Description

Surface Burner Knob Specifications

This surface burner knob is two inches in diameter. It is a black knob with a chrome trim, and white numbering denoting the temperature level of the surface burner. Sold individually. This knob accepts a D-shaped shaft.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Element will not heat | Touchpad does not respond
This part works with the following products:
Cooktop, Range.
This part works with the following products:
Jenn-Air, Hoover, Kenmore.
Part# WPY700854 replaces these:
AP6024212, WPY700854VP, Y700854, Y707697
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
4 Reviews
4.8
Filter By Rating:
  • 5 Stars
    3
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 4.7 / 5.0, 36 reviews. What's this?
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Wanted to "renew" cook top
The drip pans, burner knobs and electric surface elements are easily removed and replaced. The new receptacles for the burners were NOT easy to replace, but electricians were on hand to install when they replaced the cook top into the new counter top. Even the electricians had to read the instructions - and remove the control panel to replace one of the receptables. Looks like a new cook top.
Other Parts Used:
Delta Frame Surface Unit - 8 Inch Delta Frame Surface Unit - 6 Inch Drip Bowl - Chrome - 8 Inch Drip Bowl - 6 Inch Surface Burner Receptacle Kit
  • Lucille from Mattoon, IL
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    15 - 30 mins
32 of 42 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lettering on old stove knobs was no longer visible and knobs were loose.
Took the old knobs off and replaced them with the new!
Other Parts Used:
  • Chris from Poway, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
26 of 31 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old Jenn-air going going gone
My poor Jenn-air was about to kick the bucket, when I came across parts select. For under $ 500.00 I was able to get all new burners, knobs and grease jars. This and a few hours of scrubbing I am back to brand new stove. I had a repair man cme out and blessed my stove dead, microwave unsafe and about $1500.00 to repair the Jenn-air. Let just say for the money saved from Parts select, I got a real nice stove and microwave installed for the same amount quoted for the repair of the Jenn-air. Thanks Parts select for the great site and completive pricing.
Other Parts Used:
Glass Grease Collecting Jar Grease Filter Cartridge 4 Spades - Stainless Steel
  • Scott from Carrollton, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
21 of 689 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fan switch burned out, Burner switch only worked on HIGH.
Well, since the circuit breaker blew when the fan switch burned out, I was hoping to get a new counter-top range out of this. But, no such luck. My son opened up the control module (2 screws under the fan grill) and found the problem. Then I decided that if I needed to replace ONE part, I'd replace ALL of the parts that didn't work and were worn out.
First I turned off the breaker all the way, then, since the module was open anyway (it pulls out about 2 inches), I only had to remove the old fan switch using the socket set, and replace it, wire-for-wire with the new one. The flange needed to be filed down a bit because it was wider than the original, but not a problem to do. I had to use the original nuts to hold in the new one. The new ones are smaller. Just used the socket set in reverse
....done!
The burner switch and knobs were a little more of a problem but only because ordering them didn't follow the rules...I needed series 3 parts, even though I had a "Run 01" range top. With the help of a very nice customer service rep, I got the correct parts the next day and replaced the burner swich the same way...used a socket set to loosen and remove the old switch and connected the new one wire-for-wire, and again needed to use the original washer and nut. (The wrong model that I initially received had a new washer and nut in the bag with the switch.) But, again, no problem.
The control knobs just pull off and push on...simple.
Now that I had a nearly new range top, I spent another 2 hours REALLY cleaning it (Dawn Power Dissolver is GREAT!). Looks almost like new! I guess I won't be getting a new range top for another 22 years now.....
Other Parts Used:
Surface Unit Infinite Switch Kit Rocker Switch - White
  • Judith from Leominster, MA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
15 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The drip bowls were old and stained; the knobs were so worn that they could hardly be read.
OK, this was easy, and it's a good thing 'cause I'm so blonde when it comes to repairs. But I will have to say this, my Jenn-Air looks like new and it is 29 years old. Thanks Partselect for making my repairs so quick and easy.
Other Parts Used:
Drip Bowl - Chrome - 8 Inch Drip Bowl - 6 Inch
  • Mary Jo from Minford, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
13 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
two of the surface unit infinite switch D-shaped pins were broken
following the directions in the package and on-line, this repair was easier than i could have imagined. changing out these two parts took less than 15 minutes.
Other Parts Used:
Thermostat Knob Surface Unit Infinite Switch Kit
  • Susan from San Diego, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
13 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken glass on cooktop
Simply removed screws holding glass and frame to cook elements and replaced with new glass and frame.

The replacement was very easy. The glass and frame come as a unit.

I also purchased a complete element assembly. Replacing the element assembly requires no tools and no work ... simply remove broken assemply and place new assembly into the range.
Other Parts Used:
Cartridge Glass Top - Black Thermostat Knob
  • Marshall from Gray, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
10 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burners wouldn't heat
We bought our home in 1993 with the Jenn-Air range top. It was old then, but all 4 burners worked. Over the years, I bought a grill cartridge from an appliance stove. (It would have been much cheaper thru you guys!) I loved the stove. Several years ago one of the burners stopped working and the stove really looked old and not clean! After pricing replacement rangetops, I wanted to order from the appliance stove again, but found your website. Easy to find the right replacement parts. I just removed the old cartridge and placed the new one end. That took less than 1 minute. My husband replaced the knobs and the kit with the logo. I'm guessing maybe 30min to 1 hr. He turned the breaker off to the stove, then remove the knobs and cover. He cleaned the wires and stuff!! At Christmas, all our grown children thought I had bought a new stove!! My stove is better than ever!! I will definitely buy from you guys again!!! So easy!!
Other Parts Used:
Escutcheon Kit Cartridge 4 Spades - Stainless Steel One Piece Electric Cartridge Cover Non-Stick Griddle for Electric Elements
  • Peggy from Abilene, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers
10 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
knobs were old could not read numbers
knobs fit perfectly
Other Parts Used:
  • catherine from holland, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
8 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Switches were worn out (2) and shorting out. Throwing the breaker. Actually I think the ladies boyfriend/ fiance' tried to replace the knobs that were broken with universal knobs. They didn't fit so he forced them and broke the switches internally.
Shut off the breaker! Removed down draft grill. Removed two phillips head screws and lifited switch plate out. Removed switches (2) and made wiring diagram as I went. Looked up Jenn-Air on line and ordered parts. Lost wirihng diagram in the process but still had two switches wired . Replaced all four switches. Everything working great. However while I was waiting on switches to arrive, somebody at the house was fooling with the switch plate and broke the on red indicater lens so now I'm ordering that. Oh well....
Other Parts Used:
Surface Unit Infinite Switch Kit
  • Jerry from Midland, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench set
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

5 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bob
October 23, 2019
Is this for the old style "d" shaft switch or the new style shaft switch W11120795?
For model number WPY700854
PartSelect logo
Hi Bob, Thank you for your question. This knob will fit on a square shaped shaft. I hope this helps. Thank you and have a great day!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Ray
February 20, 2022
Looking for Knobs for new style shaft switch W11120795 not the D-Shape but shaft is flat on both sides
For model number Jenn Air C301
PartSelect logo
hello Ray, thank you for writing. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS2005743. This kit includes 4 knobs. They accept a double flat shaft. We hope to hear from you soon.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Lynn
November 21, 2022
Need all the knobs for my Jenn air range. They are D shape
For model number S125
PartSelect logo
Hello Lynn, thank you for contacting us. Based on our research on your model we would recommend the thermostat knob, part number PS11757569, the upper selector knob, part number PS11743842, and the knob kit, part number PS2005742. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.

Was this helpful?
Thank you for voting!
Related Parts:
Lynn
November 22, 2022
You sent me the # wpy700854 for the knobs for the eyes. What is the two knobs control the oven?
For model number S125
PartSelect logo
Hello Lynn, thank you for contacting us. The upper selector knob, part number PS11743842, will fit your model and let you control many different functions of the oven: bake, convection, broil, off, and clean. Please reach out to customer service if you need help placing an order. Glad to be of help!

Was this helpful?
Thank you for voting!
Related Parts:
Mimi
February 24, 2022
Need 5 replacement knobs for surface burner SHAFT needs to fit double sided flat surface
For model number C301 surface burner knob
PartSelect logo
Hello Mimi, thank you for writing. We have researched the model you have provided and have found the knob you are looking for are sold as a set of 4. The Surface Burner Knob Kit PS2005743 accept a double flat shaft. We hope to hear from you soon

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11757562
Manufacturer Part Number: WPY700854
Brand
Model Number
Description
Kenmore
22302
Range - Kenmore Range/Stove/Oven Model 22302(1988) Parts
Hoover
2300
Cooktop
Jenn-Air
2300ERS
Cooktop - Electric
Jenn-Air
2320ERS
Cooktop - Electric
Jenn-Air
2325ERS
Cooktop - Electric
Jenn-Air
2350EGS
Cooktop
Hoover
2365
Cooktop
Jenn-Air
2365EGN
Cooktop
Jenn-Air
2365EGS
Cooktop
Hoover
2370
Cooktop
Jenn-Air
2370EGS
Cooktop
Jenn-Air
2375ERS
Cooktop
Jenn-Air
2380EGS
Cooktop - Electric
Jenn-Air
2385EGN
Cooktop - Electric
Jenn-Air
2385EGS
Cooktop - Electric
Jenn-Air
2390ERS
Cooktop - Electric
Hoover
2475
Cooktop
Hoover
2480
Cooktop
Hoover
2485
Cooktop
Hoover
2490
Cooktop
Hoover
2650
Cooktop
Jenn-Air
2810ERS
Range - Jenn Air Range/Stove/Oven Model 2810ERS Parts
Jenn-Air
2855EGS
Range - Jenn Air Range/Stove/Oven Model 2855EGS Parts
Jenn-Air
2860EGS
Range - Jenn Air Range/Stove/Oven Model 2860EGS Parts
Jenn-Air
3860ERS
Cooktop - Downdraft, Electric
Jenn-Air
3875ERS
Cooktop - Electric
Jenn-Air
3890ERS
Cooktop - Electric
Hoover
4760
Range
Hoover
4770
Range
Hoover
4775
Range
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service