Models > 1151WD-36

1151WD-36 Hoover Cooktop - Overview

Sections of the 1151WD-36

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Chrome Drip Bowl - 8 inch – Part Number: WPW10196405
Chrome Drip Bowl - 8 inch
★★★★★
★★★★★
(17)
PartSelect #: PS11750107
Manufacturer #: WPW10196405
This manufacturer-certified drip bowl is also known as a drip pan, and it is designed for use with cooktops and ranges. It sits below 8-inch burner elements and catches drips and spills from the cookw...
$19.80
  In Stock
Drip Bowl - 6 Inch – Part Number: WPW10196406
Drip Bowl - 6 Inch
★★★★★
★★★★★
(30)
PartSelect #: PS11750108
Manufacturer #: WPW10196406
This drip bowl is used for electric cooktops and ranges, it is designed to sit under a 6-inch surface burner. It catches the drips and spills coming from the cookware on the surface burner. This drip ...
$8.53
  In Stock
Surface Burner Receptacle Kit – Part Number: 12001676
Surface Burner Receptacle Kit
★★★★★
★★★★★
(21)
PartSelect #: PS1570190
Manufacturer #: 12001676
This kit comes with one ceramic block, metal bracket, wires, and hi-temp wire nuts.
$17.74
  In Stock
Surface Burner Element - 8 Inch – Part Number: WP3191454
Surface Burner Element - 8 Inch
★★★★★
★★★★★
(2)
PartSelect #: PS11740903
Manufacturer #: WP3191454
This large surface burner is 2100W.
$141.34
  In Stock
Screw - 6-32 x 5/16 – Part Number: WP74004005
Screw - 6-32 x 5/16
PartSelect #: PS11744050
Manufacturer #: WP74004005
This screw is well under an inch long, and is made of metal.
$6.83
  Special Order
Surface Element Switch – Part Number: W10900107
Surface Element Switch
★★★★★
★★★★★
(1)
PartSelect #: PS12070192
Manufacturer #: W10900107
$67.24
  In Stock
Economy Y-frame Surface Unit - 6" – Part Number: 04000034
Economy Y-frame Surface Unit - 6"
PartSelect #: PS20721
Manufacturer #: 04000034
This electric range economy Y-frame surface element measures six inches and has four turns. It carries 1250 watts and is used on some electric ranges. The center medallion is black.
  No Longer Available
BOTTOM, BURNER BOX – Part Number: 4011F088-80
BOTTOM, BURNER BOX
PartSelect #: PS88649
Manufacturer #: 4011F088-80
  No Longer Available
TOP, MAIN – Part Number: 2002W040-30
TOP, MAIN
PartSelect #: PS57234
Manufacturer #: 2002W040-30
  No Longer Available
TOP, MAIN (WHITE) – Part Number: 2002W040-81
TOP, MAIN (WHITE)
PartSelect #: PS57235
Manufacturer #: 2002W040-81
  No Longer Available
TOP, MAIN (ALMOND) – Part Number: 2002W040-84
TOP, MAIN (ALMOND)
PartSelect #: PS57236
Manufacturer #: 2002W040-84
  No Longer Available
NUT, SNAP – Part Number: 7103P016-60
NUT, SNAP
PartSelect #: PS122793
Manufacturer #: 7103P016-60
  No Longer Available

Questions And Answers for 1151WD-36

Be the first to ask our experts a question about this model!

Common Symptoms of the 1151WD-36

[Viewing 2 of 2]
Element will not heat
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Drip bowls were burned and tacky
First I removed the old bowls and replaced them with the new.
Parts Used:
Chrome Drip Bowl - 8 inch Drip Bowl - 6 Inch
  • Donna from Dallas, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
471 of 478 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drip bowls needed to be replaced
took old bowls out, put new bowls in, took a coffee break
Parts Used:
Chrome Drip Bowl - 8 inch Drip Bowl - 6 Inch
  • John from Chester, VT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
453 of 542 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Stove top element not working due to bad receptacle.
Turned off the power at the breaker box, cut the wires approximately 5 inches from the bad receptacle and removed it after removing one screw. Stripped back the wires about 1/2 inch and attached the new wires with the ceramic wire nuts provided and secured the receptacle back in place with the new screw provided in the kit.
My sister's husband wanted to scrap the whole range but I repaired it with $14.00 worth of parts.
The element is working great now.
Whenever I need appliance parts again I'll use partselect.com.
Parts Used:
Surface Burner Receptacle Kit
  • Richard from Carthage, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
191 of 208 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!