1151WD-36 Hoover Cooktop - Parts

1 - 12 of 50

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Chrome Drip Bowl - 8 inch – Part Number: WPW10196405
$17.96
In Stock
Chrome Drip Bowl - 8 inch
★★★★★
★★★★★
(23)
Part #WPW10196405
This manufacturer-certified drip bowl is also known as a drip pan, and it is designed for use with cooktops and ranges. It sits below 8-inch burner elements and catches drips and spills from the cookware on the burner. The diameter of the drip bowl is approximately 10 inches. This replacement might appear slightly different, but it will fit your appliance. You will need no tools to complete this repair. Simply remove the burner element, remove the old bowl, line up the hole on the new bowl with the terminal block and drop it into place. Make sure the bowl is flat before reinstalling the element. While you have the element out you should inspect the terminals for corrosion, damage, or discolouration. If you notice any of those things you should also replace the element and terminal block. You will need to replace your drip bowl if it is lost, damaged, or can no longer be cleaned. This replacement part is sold individually. To extend the life of your new drip bowl we recommend you clean it regularly with soap and water. We recommend only using the recommended drip bowl for your appliance; generic versions will not fit properly which could affect the performance of your elements and cause long-term damage.
Drip Bowl - 6 Inch – Part Number: WPW10196406
$14.10
In Stock
Drip Bowl - 6 Inch
★★★★★
★★★★★
(48)
Part #WPW10196406
This drip bowl is used for electric cooktops and ranges, it is designed to sit under a 6-inch surface burner. It catches the drips and spills coming from the cookware on the surface burner. This drip bowl is chrome, and it has a diameter of 8 inches. You need to remove the burner element to replace this part. Line the hole up with the element terminal blocks, and ensure the new bowl is flush with the surface of the cooktop before replacing the burner element. Drip bowls need to be replaced when they are lost, damaged, or you are no longer able to clean them adequately. This replacement part is sold individually.
Surface Burner Receptacle Kit – Part Number: 12001676
$27.20
In Stock
Surface Burner Receptacle Kit
★★★★★
★★★★★
(30)
Part #12001676
This kit comes with one ceramic block, metal bracket, wires, and hi-temp wire nuts.
Standard Y-Frame Range Surface Burner – Part Number: WP660532
$38.62
In Stock
Standard Y-Frame Range Surface Burner
★★★★★
★★★★★
(2)
Part #WP660532
The manufacturer suggests replacing the receptacle at the same time.
Surface Burner Element - 8 Inch – Part Number: WP3191454
$144.17
Special Order
Surface Burner Element - 8 Inch
★★★★★
★★★★★
(3)
Part #WP3191454
This large surface burner is 2100W.
Surface Element Switch – Part Number: W10900107
$59.35
In Stock
Range Screw 632 X 5/16 – Part Number: WP74004005
$10.95
Special Order
Range Screw 632 X 5/16
Part #WP74004005
This screw is well under an inch long, and is made of metal.
USE WPL 7106P001-60 – Part Number: 1376236
No Longer Available
USE WPL 7106P001-60
Part #1376236
USE WPL 7106P005-60 – Part Number: 1376218
No Longer Available
USE WPL 7106P005-60
Part #1376218
USE WPL 7508P006-60 – Part Number: 1337207
No Longer Available
USE WPL 7508P006-60
Part #1337207
USE WPL 7407P012-60 – Part Number: 1406214
No Longer Available
USE WPL 7407P012-60
Part #1406214
USE WPL 7103P021-60 – Part Number: 1555246
No Longer Available
USE WPL 7103P021-60
Part #1555246
1 - 12 of 50