Part Location Diagram of WH01X10310 GE Timer Knob
See part 8 in the diagram
Replacing your General Electric Washer Timer Knob
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Timer Knob

★★★★★
★★★★★
15 Reviews
$22.80
  Special Order
PartSelect Number PS1482286
Manufacturer Part Number WH01X10310
Manufactured by GE
Product Description

Timer Knob Specifications

This replacement timer knob for your washer is white in color.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your General Electric Washer Timer Knob

Replacing your General Electric Washer Timer Knob
Troubleshooting
This part fixes the following symptoms:
Will Not Start | Touchpad does not respond
This part works with the following products:
Washer.
This part works with the following products:
General Electric, Hotpoint.
Part# WH01X10310 replaces these:
AP3994965, 1264403, WH01X10310, WH01X10061, WH1X10061
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
15 Reviews
5.0
Filter By Rating:
  • 5 Stars
    15
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
Customer Repair Stories
 Average Repair Rating: 4.6 / 5.0, 80 reviews. What's this?
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Control knob teeth were worn
I spoke to a very nice young ladie who took my order and I received my order within two days. I pull the clasp off of the old knob and replace the knob and the clasp with the new part and it now works great. Thank you for helping me find the part I needed.
Other Parts Used:
  • Charles from Dallas, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
508 of 512 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Control knob stripped
The teeth on the control knob were broken off (not sure how it happened). the teeth on the stem of the knob turn the selector dial. To replace the control knob, I used a pair of needle nose pliers to remove the pin clip and pulled the knob off. The new control knob came with the clip already installed on the stem of the knob. It was a matter of pushing the new knob onto the shaft . . . and the rest is history.
Other Parts Used:
  • Robert from Joppa, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
76 of 81 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dial broke off knob. Knob stripped.
Too easy! Push on dial, push on knob, insert clip. Done. Back in the day a repairman would have probably sold me a new timer with that knob and dial!
Other Parts Used:
Knob Dial
  • Scott from Denver, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
63 of 73 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer on the washing machine wasn't working properly. Just spinning around not catching to set wash cycle
I found Partselect and searched for what I needed. Wasn't quite sure I had the right timer, so I called and gave them the model number and they did a search and found the right one. I ordered the part online and a few days later the parts were delivered to me. The timer fit right in and looked just like the origninal. Within 30 mins. washer was back in service.
Another washer we have on the property wasn't agitating correctly. After taking off the agitator ( by pulling straight up from the bottom ) I found that the coggs on the agitator hub were all worn out. I removed the center screw from the shaft and pulled the old hub off. Installed the new one ordered from Partselect and washwer was back up and running in no time.
Other Parts Used:
Dial with Compression Ring Timer Knob Clip
  • Kristina from Pasadena, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
60 of 65 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
knob and timer di not work
remove back screws to control panel. unplug timer. pull bad timer out. snap new timer in plug in connector. reattach screws to control panel. put knob on timer
Other Parts Used:
Timer Dial with Compression Ring Compression Ring Timer Knob Clip
  • RICHARD from NEWARK, DE
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
49 of 85 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
timer would not advance
removed control knob and dial with compression ring from front panel using 1/4in. nut driver removed 3 screws from rear of panel again using nut driver removed old washer timer unplugged wiring harness and reversed assembly took about 8 min.
Other Parts Used:
Timer Dial with Compression Ring
  • lee from bethel, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
36 of 41 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gear teeth stripped out on both timer knob & timer.
Super EZ repair. The replacement parts were spot on perfect. I removed 3 screws, slid the panel off, removed a wiring harness, the reversed the procedure. I used a set of needle nose pliers to slip the locking ring on the knob, and Bob's your uncle, all done.
Other Parts Used:
Timer Dial with Compression Ring Timer Knob Clip
  • William from Hillsboro, OR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
30 of 38 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dial for wash cycle wouldn't turn
opened the top part of washer where the dials are. Took out the old washer timer, inserted the new and replaced the knob and clip on the outside. Works like new.
Other Parts Used:
Washer Timer
  • Janet from Post Falls, ID
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
28 of 45 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Knob spun freely due to stripped teeth.
Part Select inclusion of parts diagram helped determine which part was broken, and how to disassemble just what was necessary. I was planning to open up the control panel to get inside, which was not necessary. Assembly was simple for the same reason. Sometimes, it does help to read the "manual" first....
Other Parts Used:
  • Robert from Washburn, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
25 of 30 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The local repair man ssaid we needed a timer switch for $90.00 plus labor
I took the control knob off and saw the teeth broken and got on line and ordered the part. It was an easy fix.
Other Parts Used:
  • Marlin from Riverton, WY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
21 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

6 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rebecca
January 31, 2019
Hello!! the outer knob will not spin the dial to start the machine. i have to manually turn the dial ring then push down the timer knob to get the washing machine to start. do i need to replace the knob or could it just be the clip? thanks!!!
For model number WLSR2200JW33
PartSelect logo
Hello Rebecca, thank you for your question. You can check the clip to see if it is loose or broken. However, the best thing to do would be to replace the timer knob PartSelect Number PS1482286 which comes with a new clip. I hope this helps!

19 people found this helpful.

Was this helpful?
Thank you for voting!
Ron
May 1, 2019
When I push in timer knob it doesn’t engage. It just spins around when you turn it. Could you tell me what part or parts i need? Thank you.
For model number GHWP1000M2WW
PartSelect logo
Hello Ron, Thank you for the question. If there is no visible damage to the knob or dial, I suggest replacing the Timer Switch, PartSelect Number PS3506805. Thank you for your inquiry, good luck with this repair!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
James
January 15, 2019
Does this replace eno20a 175d 3296?
PartSelect logo
Hello James, Thank you for the question. Very sorry but the eno20a 175d 3296 is not a valid number. In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Clark
December 2, 2019
When i removed the broken timer control knob, the spindle it attaches to came out in the knob. How is the spindle replaced or re-attached? Thanks.
For model number WJRR4170GWW
PartSelect logo
Hello Clark, Thank you for your question. The spindle cannot be reattached, you would need to replace it by replacing the timer switch for your model under part PS1482380 to fix the issue. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Maribel
December 9, 2019
GE washing machines works but i have to advance the cycles myself. How will i know if it's the entire timer or just the knob that needs to be replaced?
For model number WDRR2500K4WW
PartSelect logo
Hello Maribel, thank you for your question. If you have to advance the cycles yourself, the timer should be replaced. That is PartSelect Number: PS3406192. Please enter the part number into the site for current price and availability. Good luck with your repair!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Delois
June 27, 2023
my washer want come on plus it stop in the middle of a wash what you think that is
For model number GCWP1800D1WW
PartSelect logo
Hi Delois, thank you for reaching out. Based on our understanding of the issue, we would suggest you replace the timer, part number PS4704240, to fix the issue. We hope this solves your problem.

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1482286
Manufacturer Part Number: WH01X10310
Brand
Model Number
Description
General Electric
57731H0WW
Washer
General Electric
57731H2WW
Washer
General Electric
57731H3WW
Washer
General Electric
57731H5WW
Washer
General Electric
57731H6WW
Washer
General Electric
57731H7WW
Washer
General Electric
57731H8WW
Washer
General Electric
57731H9WW
Washer
General Electric
EJRR4170E1WW
Washer
General Electric
EWA4600G0WW
Washer - Ge Washing Machine Ewa4600g0ww
General Electric
GBAN2800F0WW
Washer - WASHER
General Electric
GBSR3140H1WW
Washer
General Electric
GBSR3140H2WW
Washer
General Electric
GBSR3140H3WW
Washer
General Electric
GBSR3140H4WW
Washer
General Electric
GBSR3140H5WW
Washer
General Electric
GBSR3140H6WW
Washer
General Electric
GBSR3140H7WW
Washer
General Electric
GBSR3140H8WW
Washer
General Electric
GCAP1000M0WW
Washer
General Electric
GCAP1000M1WW
Washer
General Electric
GCAP1000M2WW
Washer
General Electric
GCAP1800D0WW
Washer
General Electric
GCAP1800D1WW
Washer
General Electric
GCSR2090H0WW
Washer
General Electric
GCSR2090H2WW
Washer
General Electric
GCSR2090H3WW
Washer
General Electric
GCSR2090H5WW
Washer
General Electric
GCSR2090H6WW
Washer
General Electric
GCSR2090H7WW
Washer
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service