Part Location Diagram of W10908289 Whirlpool AGITATOR
See part 4 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.ca

AGITATOR

★★★★★
★★★★★
1 Review
$117.03
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11765867
Manufacturer Part Number W10908289
Manufactured by Whirlpool
Troubleshooting
This part fixes the following symptoms:
Will not agitate
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool, Amana, Crosley, Inglis.
Part# W10908289 replaces these:
W10680205, W10680208
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 5.0 / 5.0, 1 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Non agitation
It was so simple. The staff person recommended that I just YouTube it and recommended other options. As I said it was simple,
Everything I needed was in the box.
I removed the new part from the box.
I used the equipment needed to remove the top of the Agitator's bolt.
Removed the old part, clean the inside area.
Installed the new part which took some hard pushing down onto center piece and replaced the bolt in the casing.
Placed the top back on and done.
Other Parts Used:
  • michael from BROOKLYN CTR, MN
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench set
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

6 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Carter
February 19, 2019
How to remove agitator
For model number wtw4815e1o
PartSelect logo
Hello Carter, Thank you for the question. You will need to remove the Dispenser cap on the top of the agitator and expose the bolt underneath. You will just need to remove the bolt and then pull up on the agitator to remove. Thank you for your inquiry, good luck with this repair!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Sandra
October 20, 2021
Kenmore washer - Agitator is moving a little but not moving clothes around as before. Every other cycle on the washer is working properly.
For model number 11022102311
PartSelect logo
Hello Sandra, Thank you for the question. This is normally an indication the Cams/Dog Ears in the Agitator are worn and need to be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Hassen
September 10, 2019
Whirlpool Amana washer agitator if u have it pls
PartSelect logo
Hi Hassen, thank you for contacting us. If you are looking to purchase this part then you can do so by either adding it to your cart and going through the check out process online, or by calling our customer service line and ordering with one of our agents. I hope that helps. Good luck with your repair.

Was this helpful?
Thank you for voting!
Roger
November 24, 2023
The agitator was replaced a year ago, and it is stripped again. With this model it doesn't appear the agitator is two piece with the "dogs" to prevent rotation. So with it stripped, how can i get the 7/16" bolt removed from the center once you remove the top detergent cap ? Thanks for your help !
For model number WTW4815EW0
PartSelect logo
Hello Roger, thank you for reaching out. To remove the bolt, you may follow the following instructions. These instructions may not be of the exact same model but will help you with the process. After removing the detergent cap, the bolt is located at the bottom of the agitator. Use 7/16 inches socket with long extension. Once the socket is on the agitator bolt, hold the tub while you break the bolt free. Once the bolt is loose, lift the upper agitator out. Remove the agitator bolt. We hope this information is useful!

Was this helpful?
Thank you for voting!
JB
July 31, 2023
Agitator is moving a little but not moving clothes around much. Washer fills, drains and spins as normal.
For model number CAW8350EW1
PartSelect logo
Hi JB, thank you for your question. If the agitator does not move properly, you may first need to make sure that nothing is stuck under the agitator. If that is not causing the issue, then you may need to check the drive block, part number PS11741977. The drive block connects the washer transmission to the agitator. If the drive block is worn out, the transmission shaft will still move back and forth, but the agitator will only move slightly or will not move at all. If the drive block is worn out, stripped, or damaged, replace it. We hope this information is helpful!

Was this helpful?
Thank you for voting!
Related Parts:
Christie
October 13, 2023
Ordered replacement agitator that does not seem exact and won't fit over rod. Old agitator has smooth hole to slide on and off, replacement agitator has a notched hole and too is small to fit over rod. Please advise.
For model number WTW4815EW1
PartSelect logo
Hello Christie, thank you for reaching out. We have researched and found that the compatible agitator for your model is part number PS11765867. Install the agitator by aligning it on the drive shaft and insert the mounting bolt. Thread and tighten the bolt and insert the cap on top after it. We hope this helps!

Was this helpful?
Thank you for voting!
  • 1
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11765867
Manufacturer Part Number: W10908289
Brand
Model Number
Description
Kenmore
1105142512
Washer - Washer
Whirlpool
3LWTW4705FW0
Washer - RESIDENTIAL
Whirlpool
3LWTW4815FW0
Washer - RESIDENTIAL
Whirlpool
4GWTW1955LW0
Washer - Washer
Admiral
4KATW4830EW0
Washer - WASHER
Maytag
4KMVWC130EQ0
Washer - WASHER
Maytag
4KMVWC230EW0
Washer - WASHER
Amana
4KNTW4430EQ0
Washer - WASHER
Amana
4KNTW4530EQ0
Washer - WASHER
Amana
4KNTW4605FW0
Washer - RESIDENTIAL
Amana
4KNTW4705FW0
Washer - RESIDENTIAL
Whirlpool
4KWTW4605FW0
Washer - RESIDENTIAL
Whirlpool
4KWTW4705FW0
Washer - RESIDENTIAL
Whirlpool
4KWTW4730EQ0
Washer - WASHER
Whirlpool
4KWTW4815FW0
Washer - RESIDENTIAL
Whirlpool
4KWTW4830EQ0
Washer - WASHER
Admiral
ATW4675EW0
Washer - WASHER
Crosley
CAW8350EW0
Washer - WASHER
Crosley
CAW8350EW1
Washer - WASHER
Crosley
CAW8350EW2
Washer - RESIDENTIAL
Crosley
CAW9352EW1
Washer - WASHER
Crosley
CAW9352EW2
Washer - RESIDENTIAL
Inglis
ITW4671EW0
Washer - WASHER
Inglis
ITW4671EW1
Washer - RESIDENTIAL
Inglis
ITW4771EW0
Washer - WASHER
Amana
NTW4605EW0
Washer - WASHER
Amana
NTW4605EW1
Washer - WASHER
Amana
NTW4615EW0
Washer - WASHER
Amana
NTW4635EW0
Washer - WASHER
Amana
NTW4655EW0
Washer - WASHER
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service