Average Repair Rating: 3.8 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer would not run or start when start button was pushed.
Based on, online troubleshooting and repair guide. First repair attempt was unsuccessful after replacing suggested parts and required a professional repair tech to diagnose the issue. Second attempt at repair was successful after the proper issue was diagnosed. Sometimes you just have to call a professional. John Suchinsky, Paterson NJ
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Anita
January 7, 2018
How do you attach this part to the washer?
For model number PS11754116
Hello Anita, Thank you for your inquiry. Use a putty knife around the edges to lift up the top of the washer. Use a screwdriver to undo the screws that hold the latch to the bezel, then lower the top, lift the lid and pull the old bezel out. Put the new bezel in place and re-attach the screws that hold the lid switch to the bezel. Then press the top down back onto place. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Viviana
September 6, 2019
Does this come with the screws to attach it? If not what kind/size screws does it need? Do you guys sell them? Thank you!
For model number Wtw5600xw1
Hi Viviana, this part does not come with the screws. The screws are part WP8281163. We sadly do not have the size information.Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
JOHNNY
April 28, 2022
How do you install the bezel #WPW10392041 on this model?
For model number 110.25132410
Hi Johnny,
Thank you for your question. To install the bezel, first use a putty knife around the edges to lift up the top of the washer. Then use a screwdriver to undo the screws that hold the latch to the bezel. Then lower the top and lift the lid and pull out the old bezel. Put the new bezel in place and re-attach the screws that hold the lid switch to the bezel. Then press the top back down into place. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
The point of the lid switch is for the tub to stop spinning when the washer lid is opened. It is a safety precaution just in case someone decides to stick their hand inside the washer while the tub is spinning.
This part is the replacement lid latch or latch assembly for your top-load washer. The lid latch holds your washer door closed, and allows the washer to run its cycle. If the lid latch is damaged, your washer door may no...
This part is the replacement lid latch or latch assembly for your top-load washer. It contains the latch mechanism and the connecting wire that hooks the door latch to the electrical system of the washer. The lid latch h...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11754116
Manufacturer Part Number: WPW10392041
