Real ratings from other people who bought this part.
Average Rating:
★★★★★
★★★★★
23 Reviews
4.7
Out of 5
5 Stars
20
4 Stars
1
3 Stars
0
2 Stars
2
1 Star
0
Search reviews left by others. DIY doesn't mean you have to do it alone. Use simple keywords like "fit", "broken", "easy", or "quality" to find reviews that match!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
3
Next
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Luc C - October 28, 2021
Verified Purchase
Excellent
Exactement ce que je cherchais. Livraison rapide. Merxi
★★★★★
★★★★★
Barbara S - July 21, 2020
Verified Purchase
Easy repair
Came very quickly and repair went very well. Washer is back to working perfectly.
★★★★★
★★★★★
Sharon J - November 15, 2021
Verified Purchase
Repaired washing machine
Replaced springs in washer and worked again, Thanks to the help of a PARTSELECT employee and the extraordinary delivery service!
★★★★★
★★★★★
Kaitlin L - November 15, 2019
Verified Purchase
Easy repair
Came fast, exactly what I wanted
★★★★★
★★★★★
Peter G - June 13, 2019
Verified Purchase
Fast professional service!!!
Exactly as described, delivered quickly!
★★★★★
★★★★★
Steve T - August 10, 2022
Verified Purchase
works as expected
Fast shipping, the right part
★★★★★
★★★★★
Lucien B - January 17, 2019
Verified Purchase
Easy Repair
Part was available at good price and shipping was excelent.
★★★★★
★★★★★
Jim M - October 3, 2018
Verified Purchase
washer repairs
Great place foe all your parts needs
★★★★★
★★★★★
Tami D - February 2, 2021
Verified Purchase
Quick and Easy Repair
My husband installed the part and the washer works as good as new. We couldn't believe how fast the spring came in the mail. It was a very easy repair.
★★★★★
★★★★★
CLAUDE O - May 1, 2020
Verified Purchase
The right part for the right price
The only thing your shipping cost is way to high
Prev
1
2
3
Next
Repair Tips
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
Easy
1- 2 hours
Average repair rating from 34 real customers like you
Sort by:
Prev
1
2
3
Next
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sorry, we couldn't find any existing installation instruction that matched.
Replace Water Pump Coupling
843 of 916 peoplefound this instruction helpful.
RICHARD from PHILA, PA
Really Easy
15 - 30 mins
Nutdriver, Screw drivers, Socket set, Wrench set
Removed casing tip over washer disconnected water pump. Disconnected motor then replace coupling then reassemble motor then replaced water pump.
Washer tub slammed into washer body during spin cycle
377 of 415 peoplefound this instruction helpful.
Brian from Seattle, WA
Easy
15 - 30 mins
Pliers, Screw drivers
If you load a washing machine unevenly, it will spin out of balance. But our washer seemed to make noise during the spin cycle regardless of how the load was distributed. I suspected that the suspension or balancing springs were getting tired, and ordered a replacement set.
First I disconnected the washer from the water and pow
... Read moreer supply, then I laid it on its back.
The tub rested on the back of the washer, making two of the three suspension springs relax, and they were pretty easy to pull out with pliers. After the first two were out, I had to support the tub with a couple 2x4s to relax the third suspension spring.
Installation was the reverse of removal - install the lower suspension spring, remove the 2x4s, then install the two other suspension springs.
The tub balancing spring was easy to replace, and probably wasn't the cause of the problem.
With $25 in parts and about 15 minutes, my washer spins much more quietly.
Took some online research to figure out how to get the cabinet off. Once inside I fitted the wear pads which were a breeze to remove using a knife blade to pry them up and removing them using the screwdriver. The springs were replaced one by one using strong fingers. The machine went through the spin cycle without any rocking or self-des
... Read moretruct noises.
I thought I would find broken springs but everything looked good. Comments and video very helpful.I figured springs must be stretched or worn out ,so for the money I figured worth a try. Insallation went well, washingmachine runs like a new machine. Much better than spending money on a new one. Thanks
After seeing video it was easy . Took everything apart tub,basket,replaced all springs. Tub wear pads. It took longer because I cleaned eveything,took my time. There was a lot of deposits on tub and outer tub also some rust . Put it all back together all nice and clean . pluged it in put it in spin cycle and the motor just hummed. I than
... Read more check to see if somethig was stuck no .Pulled motor tested it with out a load and did not work. Motor start winding went. Motor died. 2n one in 7 years. So I fixed that proplem I am a new owner of a Speed Queen washer and dryer .
Disconnected the bracket screws that held the suspension springs in place - fed new springs into bracket and reattached. Local repairman told me that springs dont wear out, they break - wrong, they do lose their tension and thereby lose the ability to counterbalance the spinning load. Washing machine now spins like new - no wobble or shak
... Read moree.
sounded out of balance even after shifting clothes
35 of 38 peoplefound this instruction helpful.
Lori from Parchment, MI
Easy
15 - 30 mins
Pliers
The tub was out of alignment and water fell behind it and onto the floor. My brother-in-law suggested my problem could be the tub balancing spring and when I moved my washing machine, there it was on the ground. The schematic does not show where it hooks up. So after I did what I thought looked right, the machine still did not wo
... Read morerk properly. Then I replaced the three suspension springs and that didn't solve the problem. I found a whirlpool "do-it-yourself" repair book at the library and was prepared to tear into the machine. However, I did not have the tub balancing spring in the correct spot at one end. It hooks up from one of the outer bracket to the back of the housing unit along between the legs. There is a hole that had rusted through. I simply drilled a new hole nearby and low and behold it works! Easy fix - the frustration was with the poor schematic.
Read less
Was this helpful?
Thank you for voting!
Excessive tub wobble, tubs leaning forward of normal
31 of 33 peoplefound this instruction helpful.
David from GLEN BURNIE, MD
A Bit Difficult
More than 2 hours
Nutdriver, Pliers, Screw drivers, Socket set
Washer is 29 years old. Found that tub spring hooks into a simple (non-reinforced) hole in the base frame, and it had worn the hole through through the edge of the frame (key hole style). Due to age and low cost of parts, ordered all suspension springs, brackets, & pads. Once they arrived, took the tubs out (first time for that), found
... Read more that the suspension pads looked fine, but the wear pads showed a lot of wear and the front one was snapped in the middle, perhaps an after effect of the spring failure. From my lack of attention, initially tried to get front pad into the wrong set of holes, a bad fit; corrected. Simply drilled a near-by hole in the base frame for the tub spring.
While the tubs were out, took them outside and scrubbed them clean. Also cleaned agitator parts using bottle brushes. Followed the PartSelect videos and owner comments for procedures, methods. Found that some miss some important info, but if you watch others you can combine the info to find what you need re disassembly/assembly.
At one point while attempting to remove the outer tub, did not realize that the screw that holds the rear spring bracket to the tub also holds the tub to the suspension plate.
Took me most of a day for the whole process, and I ended up with pulled/spasmic muscles from all the bending over, mostly from cleaning parts I think. Very helpful to have the parts breakout drawings, videos, others' experience.
Ask our experts a question about this part and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
3
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
James - For model number LSR8444LQ1
December 25, 2017
How many tub springs to this model
Hello James, Thank you for your inquiry. There is 1 tub spring for this model. Hope this helps!
30 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Billy - For model number LBR4132JQ1
January 15, 2018
How many springs are for this model.
Hi Billy,
Thank you for your question. There should be 4 suspension springs in your washing machine. I hope this helps. Thank you and have a great day!
10 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Josh - For model number Whirlpool Washing Machine Model WTW5540SQ0
January 22, 2018
Washer keeps turn , moving or walking around when spin out other then that works fine. When standing in front of washer as if you where loading or unloading it turns about 90 degrees to the left ever time have made sure its level it does this no matter the size of the load. Any thoughts on how to fix this problem? Have already checked all the springs. Thanks for the help
Hi Josh,
Thank you for your question. If your washer is shaking and moving, there are some parts that you will need to check to see which one is causing the issue. You will need to check the suspension springs, the tub spring, the tub wear pads, the leveling springs, the suspension pads, the agitator directional cogs, the levelling legs and the suspension spring retainers. I hope this helps. Thank you and have a great day!
7 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Doug - For model number YKAWE860W
June 26, 2019
Hello, thank you for your quick response to my question. I have looked at the video and it seems straightforward. The machine in the video is a different model. Would I be right in assuming that the method is the same across all the models? Thanks.
Hello Doug, Thank you for the question. Yes, the appliance might be different but it will have the same basic steps for installing the springs. Hope this helps!
5 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Doug - For model number YKAWE860W
June 26, 2019
Hi, how many springs are there - #ps11751118 , i would like to replace all once the washer is opened up. The video works for me. Thanks
Hello Doug, thank you for your question. There is only one Tub Spring on this model.
5 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Ted - For model number 11026058690
September 27, 2019
I replaced 1 tub spring and 3 balance springs. The tub still tilts forward. So when filling the water splashes out and onto the floor. What next?
Hi Ted, thank you for your question. The only other part that I could suggest you check would be your balance ring. I have linked that part down below for you. Good luck with your repair.
I need to buy the correct suspension springs for my model as well as the tub spring. Please advise which correct parts to order? Great instruction videos.
Hello Justin, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS11743345 for the Suspension Spring and PartSelect Number: PS11751118 for the Tub Spring. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Hello, Thank you for your question. It looks like your model has 1 of those tub springs. We hope this helps.
3 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Doug - For model number YKAWE860W
June 26, 2019
Hi, My washer bangs and the tub leans to the front. I think a spring might be broken. Do you carry the springs for this model and how do I remove the cab to get at them? Thanks.
Hello Doug, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11751118. Once you enter the part number there is a video on how to install it on the site. Hope this helps!
3 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Trent - For model number MVWC500VW0
February 7, 2019
The washer that i am trying to repair is the above model number and i wanted to know how many suspension springs and counter-balance springs there are for this model. Currently the washer is walking during the spin cycle so i am trying to get the tub to spinning on the correct axis. Thank you.
Hello Trent, Thank you for the question. This model number requires 1 Tub Spring PS11751118 and 3 Suspension Springs, PS11743345. Thank you for your inquiry, good luck with this repair!
Item is in stock and is estimated to be delivered in 2-3 business days via Standard Shipping.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Spring or Shock Absorber","title":"Spring or Shock Absorber","url":"/Washer-Springs-and-Shock-Absorbers.htm"},{"position":2,"name":"WPW10250667","title":"WPW10250667","url":""}]
My Orders
