Spring Outer Bracket WP64067

Official part for Whirlpool, Kenmore, KitchenAid, Roper

Easy 

More than 2 hours 

Install video
11743348-1-M-Whirlpool-WP64067-Spring Outer Bracket
Part Location Diagram of WP64067 Whirlpool Spring Outer Bracket
See part 2 in the diagram
Replacing your Whirlpool Washer Spring Outer Bracket
( Grid squares measure 1x1 inch )
11743348-1-S-Whirlpool-WP64067-Spring Outer Bracket 11743348-2-S-Whirlpool-WP64067-Spring Outer Bracket 11743348-3-S-Whirlpool-WP64067-Spring Outer Bracket Part Location Diagram of WP64067 Whirlpool Spring Outer Bracket Replacing your Whirlpool Washer Spring Outer Bracket
Proudly Canadian
OEM badge Official OEM Part
$14.95
In Stock
Order within the next 4 hrs and your part ships today!

Part Fit Check - Make Sure it's a Match.

Where to find your model number

About This Part

What it does. Why it matters. Everything you need to know for an easy fix.

Spring Outer Bracket Specifications

Sold individually.
Part #WP64067
Manufactured by Whirlpool for Whirlpool, Kenmore, KitchenAid, Roper

You May Also Need

Because heroes deserve fewer surprise re-installs.

$16.15
In Stock
$12.95
In Stock
$21.54
In Stock
$15.00
In Stock
$9.85
In Stock
No Longer Available
$26.85
Special Order
$34.95
In Stock
$29.95
In Stock
$35.15
In Stock
$35.95
In Stock
$35.15
In Stock

Genuine OEM: Original Parts. Lasting Repairs.

Because quality isn't optional.

OEM stands for Original Equipment Manufacturer. This means that the company who made your appliance is also supplying the replacement part.

How Buying OEM Parts Can Save You Time and Money
Features OEM Generic
Genuine brand name
Guaranteed to fit
Superior Quality
Long term value

Part Videos

Watch our pros, then fix it yourself.

Replacing your Whirlpool Washer Spring Outer Bracket

Replacing your Whirlpool Washer Spring Outer Bracket

About this fix

Common problems and models this part fixes.

Easy 

More than 2 hours 

Rated by verified customers

Works with the following products:
  • Washer
  • Washer Dryer Combo
Part# WP64067 replaces these:
AP6010171, 62607, 64067

Repair Tips

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!

Easy 

More than 2 hours 

Average repair rating from 4 real customers like you

Sort by:
  • 1

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sorry, we couldn't find any existing installation instruction that matched.
unbalanced load...knocking sound.
32 of 37 people found this instruction helpful.
  • Edward from Easthampton, MA
  • A Bit Difficult
  • More than 2 hours
  • Nutdriver, Pliers, Screw drivers
Unbalanced load was creating a knocking sound (as if the clothes load was unbalanced). Dismantled the washer to find that one brackets had rusted out. [FYI: 3 bracket at 120 degree apart (for the 360 degree circle)]. I found that the hole (on the bracket) where the spring holds was gone. Purchased parts. Replaced them (spring, bracket, screw). Reassembled washer then ran wash for a cycle. Successful fix.
Read less
Was this helpful?
Thank you for voting!
Excessive tub wobble, tubs leaning forward of normal
31 of 33 people found this instruction helpful.
  • David from GLEN BURNIE, MD
  • A Bit Difficult
  • More than 2 hours
  • Nutdriver, Pliers, Screw drivers, Socket set
Washer is 29 years old. Found that tub spring hooks into a simple (non-reinforced) hole in the base frame, and it had worn the hole through through the edge of the frame (key hole style). Due to age and low cost of parts, ordered all suspension springs, brackets, & pads. Once they arrived, took the tubs out (first time for that), found that the suspension pads looked fine, but the wear pads showed a lot of wear and the front one was snapped in the middle, perhaps an after effect of the spring failure. From my lack of attention, initially tried to get front pad into the wrong set of holes, a bad fit; corrected. Simply drilled a near-by hole in the base frame for the tub spring.

While the tubs were out, took them outside and scrubbed them clean. Also cleaned agitator parts using bottle brushes. Followed the PartSelect videos and owner comments for procedures, methods. Found that some miss some important info, but if you watch others you can combine the info to find what you need re disassembly/assembly.

At one point while attempting to remove the outer tub, did not realize that the screw that holds the rear spring bracket to the tub also holds the tub to the suspension plate.

Took me most of a day for the whole process, and I ended up with pulled/spasmic muscles from all the bending over, mostly from cleaning parts I think. Very helpful to have the parts breakout drawings, videos, others' experience.
Read less
Was this helpful?
Thank you for voting!
washer was shaking violently
7 of 8 people found this instruction helpful.
  • Russell from WHEATON, IL
  • Difficult
  • 1- 2 hours
  • Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
Following the video that was supplied with my order was super helpful. Watching it though made the job seem very easy of which it really wasn't. My washer is about 6 years old so it had a LOT of build up on EVERYTHING making the disassembly harder than you may think. Once apart I needed to really scrub everything clean before reassembly as well. Getting the tub off without cracking it was a challenge for sure. Eventually rocking it and adding a bit of WD-40 to the shaft if eventually came off. Once it was off I was able to replace the Tub Wear Pads quite easily. Getting to it was the challenge. Installing new wear pads and new suspension springs fixed the problem. Once I had the casing back together I replaced the agitator cam set as well. I figured as long as I already had it apart why not be proactive and fix the next to fail and boy am I glad I did. Once I had it out it just fell apart in my hands with the cams showing almost no ribs at all left to latch onto.
Read less
Was this helpful?
Thank you for voting!
tub tilted forward. Some fill water would miss the tub
4 of 7 people found this instruction helpful.
  • Craig from HOLDREGE, NE
  • Very Easy
  • 30 - 60 mins
  • Screw drivers, Socket set, Wrench set
Removed cabinet found tub spring had worn thru rear frame, spring was also almost worn thru. Checked suspension springs very very worn at mounting points.
Ordered needed parts. All in Stock. First bracket came the next day took 5 days to get the rest 1 part at a time.
Forgot to order suspension spring clips, order them next day shipping came the next day .
Just because parts are in stock doesn't mean you will receive in a timely fashion if you need parts better order next day freight.
Videos, parts diagrams and instruction are great, regular freight is not good
Read less
Was this helpful?
Thank you for voting!
  • 1

DIY Questions and Expert Answers

Be the first to ask our experts a question about this part!

This Part Also Fits These Models

Don't see your model? Use our Fit Checker to confirm!

Check Part Fit
Part #WP64067
Brand
Model Number
Description
Kenmore
10682872600
Washer - Kenmore Washing Machine Model 106.82872600 (10682872600, 106 82872600) Parts
Kenmore
11010202000
Washer
Kenmore
11010202001
Washer
Kenmore
1101050299
Washer - Kenmore Washing Machine Model 110.1050299 (1101050299, 110 1050299) Parts
Kenmore
11010502990
Washer
Kenmore
11010502991
Washer
Kenmore
11010852990
Washer
Kenmore
11010852991
Washer
Kenmore
11012202100
Washer
Kenmore
11012502100
Washer
Kenmore
11012852100
Washer
Kenmore
11013202200
Washer
Kenmore
11013212200
Washer
Kenmore
11014102300
Washer
Kenmore
11014112300
Washer
Kenmore
11014202300
Washer
Kenmore
11014212200
Washer
Kenmore
11014222300
Washer
Kenmore
11014502300
Washer
Kenmore
11014852300
Washer
Kenmore
11015732400
Washer
Kenmore
11015842400
Washer - Kenmore Washing Machine
Kenmore
11015852400
Washer
Kenmore
11015862400
Washer
Kenmore
11015864400
Washer
Kenmore
11015942400
Washer
Kenmore
11015942401
Washer
Kenmore
11015944400
Washer
Kenmore
11015944401
Washer
Kenmore
11015952400
Washer
Spring Outer Bracket
$14.95
In Stock
✖
Stock Status

In Stock

Item is in stock and is estimated to be delivered in 2-3 business days via Standard Shipping.

On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.