CS30 - Parts

133 - 144 of 287

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Fuel Cap – Part Number: 300758006
No Longer Available
Fuel Cap
Part #300758006
Genuine OEM replacement part, this item is sold individually. This Fuel Cap is is on the fuel tank on the outdoor products shown below. This is a vented Fuel Cap. It includes a gasket inside the Cap.
Rotor W/starter Pawl – Part Number: 300952002
No Longer Available
Rotor W/starter Pawl
Part #300952002
This item has been OEM sourced to ensure a high-quality standard. The rotor is intended to be used with trimmers, blowers, and chainsaws from Homelite and Ryobi. The rotor is the engine's flywheel and is used as one of the main components in the ignition sequence. The rotor has magnets on its edge that create an electric charge as they pass the ignition module, this ignites the air/fuel mixture in the cylinder which rotates the crankshaft and the drive shaft. This item includes the pawls that make contact with the recoil starter pulley when the starter rope is pulled.
Spacer Tube – Part Number: 638284002
No Longer Available
Spacer Tube
Part #638284002
Hanger Cap – Part Number: 518019002
No Longer Available
Hanger Cap
Part #518019002
Heat Dam – Part Number: 518070001
No Longer Available
Heat Dam
Part #518070001
This is a genuine manufacturer approved replacement part. This specially designed heat dam is used on a variety of gas powered trimmers/brushcutters and edgers. This part plays an important role because it works as a spacer for carburetor allowing it to stay cool. This part is made out of plastic and it is sold individually. You will need a wrench to remove the carburetor when replacing this item.
Air Box Cover – Part Number: 518096001
No Longer Available
Air Box Cover
Part #518096001
This is a manufacturer approved replacement cover designed for use with gas string trimmers/pruners/brush cutters. The purpose of this cover is to secure air filter element which is sold separately and it protect internal parts like carburetor from dirt and debris. It is made out of plastic and it is sold individually. Replacing this part does not require any tools. It simply snaps into place.
Rear Housing – Part Number: 518504002
No Longer Available
Rear Housing
Part #518504002
The rear housing attaches to the short block. It is made of plastic and is sold individually. This is a genuine OEM sourced part which is specially designed for use with Ryobi pruners and trimmers. During replacement, it may require a screwdriver to help install this item correctly. Over time this part may break and will need to be replaced.
Air Baffel – Part Number: 518685001
No Longer Available
Air Baffel
Part #518685001
This is a genuine item that is supplied by the original equipment manufacturer for Ryobi and Homelite handheld trimmers. It is an identical replacement for a missing or a damaged air baffle that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. This high-quality part is made of durable plastic and is sold individually, keep in mind the hardware to secure it is sold separately.
Trigger Lock – Part Number: 518695001
No Longer Available
Trigger Lock
Part #518695001
This is a genuine manufacturer-sourced replacement part and is made to be used with a Ryobi string trimmer. This plastic trigger lock fits into the handle assembly and is used to actuate the throttle trigger. Please refer to your model's diagram for correct placement. This is sold as an individual replacement part.
Throttle Trigger – Part Number: 518696001
No Longer Available
Throttle Trigger
Part #518696001
This plastic part is a genuine OEM replacement piece guaranteed to fit the machines listed below. It works in conjunction with the throttle trigger spring (part # 690694002), which keeps throttle in position and ready to engage the cable. In order to keep control of the spring, use caution when disassembling the handle for this repair. Also be sure to pay close attention to the orientation of all related parts; correct positioning is vital for tool to function. Sold individually.
Front Handle – Part Number: 518738001
No Longer Available
Front Handle
Part #518738001
This is an authentic Ryobi replacement part, sourced from the original manufacturer for use with trimmers. The special front handle connects to the upper boom assembly and is used to provide support while operating the trimmer. This front handle is sold as an individual replacement part, please note the hardware used to mount the handle is available separately.
Air Filter Base – Part Number: 518766001
No Longer Available
Air Filter Base
Part #518766001
Genuine OEM replacement part, this item is sold individually. This part is installed in between the carburetor and the air box cover It is the Air Filter for the outdoor equipment listed below. It has a fine mesh material for the Air Filter. Once this filter gets dirty and or clogged it can be blown clean or brushed clean. If it develops a hole in it or gets torn, it should be replaced ASAP, or it could cause damage to the carburetor and engine.
133 - 144 of 287