CS30 - Overview

Models starting with CS30

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
String Head Assembly – Part Number: 000998265
$111.64
Special Order
String Head Assembly
Part #000998265
Genuine OEM replacement part, This item is sold as a kit. This is the complete Stringhead Assembly for the Trimmers shown below. It is a dual line head. To install this part, slide it on the spindle or shaft of the Trimmer The kit contains two Spool Retainers to secure the Stringhead. The red one has left hand threads and the black one has right hand threads. It will depend on the model you have, on which Spool Retainer to use. The cutting line diameter used in this Stringhead is .095
Gasket- Intake Manifold – Part Number: 02453
$5.95
Special Order
Screw (m4 X 19 Mm) – Part Number: 660968001
$5.95
Special Order
Screw (m4 X 19 Mm)
Part #660968001
This is a genuine manufacturer-sourced replacement screw which is specially designed for use with Homelite and Ryobi handheld lawn and garden equipment. It is a standard hardware which has multiple applications based on the model of your tool, please refer to the appropriate diagrams for the correct location and use of this part. It is made of high-quality metal and it is sold individually.
Bolt – Part Number: 145344-00
$7.44
In Stock
Bolt
Part #145344-00
This is an OEM part sourced directly from the manufacturer. The screw is found in Craftsman circular saws. This is a metal part, used to hold other components to the spindle assembly. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. This part is sold individually.
Trimmer Screw (M6 X 20 Mm) – Part Number: 660697002
$5.95
Special Order
Trimmer Screw (M6 X 20 Mm)
Part #660697002
A loose upper shaft or housing may be caused by a damaged or missing mounting screw. This black metal fastener has an M6 x 20 mm thread and a Torx-style head. Check the clamp, threaded hole, bracket, and nearby hardware before installing a replacement. Match the screw to the full tool model and parts diagram because its use may differ between machines. Shut down the tool and prevent it from starting. Thread the screw by hand to avoid damage, then tighten it securely without crushing or cracking the parts it holds.
Bolt- Guide Bar Thd. Forming – Part Number: 69195
$6.95
Special Order
Bolt- Guide Bar Thd. Forming
Part #69195
This is an authentic replacement part manufactured for use with Homelite chainsaws. The special guide bar bolt is commonly used to secure the guide bar plate and the bar. This guide bar bolt is available as an individual replacement part, please see model diagram for associative parts.
Crankcase Cover – Part Number: 638337005
$5.95
Special Order
Crankcase Cover
Part #638337005
This is an authentic replacement part sourced directly from the manufacturer. The crankcase cover is commonly found in yard tools from Ryobi and Homelite, such as trimmers, blowers, pruners, and edgers. This part is made of metal, and is used in the short block assembly to house the crankcase. You may require an Allen wrench or screwdriver when replacing this item. The crankcase cover is provided as an individual replacement part.
Heat Shield – Part Number: 638442001
$5.95
Special Order
Heat Shield
Part #638442001
It is a genuine item that is supplied directly from the original equipment manufacturer for use with Ryobi and Homelite handheld lawn and garden equipment. This is an identical replacement for a missing or a faulty heat shield that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality part is made of durable metal and is sold individually. Note, the hardware to secure it is sold separately.
Heat Dam – Part Number: 518497001
$5.95
Special Order
Heat Dam
Part #518497001
It is a high-quality replacement part that is sourced directly from the original equipment manufacturer for use with Homelite and Ryobi handheld lawn and garden equipment. Heat dam acts as a spacer for carburetor allowing it to stay cool. It is made of durable plastic material and it is sold individually, please note gaskets and other components are all sold separately.
Pin- Adjusting – Part Number: 692542
$19.95
Special Order
Pin- Adjusting
Part #692542
The adjusting pin is made out of metal. This item is priced as an individual replacement part. This is a genuine Homelite replacement part used in compatible saws. A screwdriver may be needed during the replacement of this part. It will require replacing if it becomes broken or bent.
Screw-hex Hd. (1/4-20 X 1 1/2& – Part Number: 82278
$5.95
Special Order
Screw (st-155) – Part Number: 82538
$5.95
Special Order
Screw (st-155)
Part #82538
A genuine replacement part which is supplied directly from the original equipment manufacturer for use with Homelite and Ryobi handheld lawn and garden equipment. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality screw is made of durable metal and is sold individually.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
fuel line leaks
15 of 35 people found this instruction helpful.
  • john from Massena, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
As others have said , simply remove old tank and tubes and replace in reverse order., being sure tube from filter goes to primer bulb.
Was this helpful?
Thank you for voting!
Would not run
4 of 5 people found this instruction helpful.
  • Herbert from SPANISH FORT, AL
  • Really Easy
  • 30 - 60 mins
  • Pliers, Socket set, Wrench set
Replaced carburetor, fuel lines, fuel filter and spark plug all from parts select. Very small amount of carburetor adjustment. Worst part was replacing fuel lines into fuel tank. Sharpened edges and put dawn dishwashing detergent on them and pulled them through tank with needle nose pliers! Worked like a charm!! Spent only about 45 minute s.
Was this helpful?
Thank you for voting!
bearing set up in lower shaft.
3 of 4 people found this instruction helpful.
  • Irvin from BURR OAK, MI
  • Very Easy
  • Less than 15 mins
  • Socket set
Purchased and replaced curved lower shaft assembly.
Was this helpful?
Thank you for voting!