110C68132413 Kenmore Dryer - Instructions

All Instructions for the 110C68132413
76 - 90 of 211

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
drum made a thumping sound was really noisey
3 of 5 people found this instruction helpful.
  • james from auburn, IN
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Socket set, Wrench (Adjustable)
pulled dryer away from wall took screws out of lint screen lift top removed 2 screws one on each side of front at top and removed front panel. pulled belt off drum removed drum rollers tension pulley and while i was at it pulled back cover off of heating element and blower blew everything out with air hose did a total cleaning installed e verything in reverse. i was amazed how fast the parts came the dryer was only down 2 days and it runs like new even if it is 20 years old i highly recommend parts slect and i will use them in the future
Was this helpful?
Thank you for voting!
Loud rumble and finally the drum stopped because the belt broke
3 of 5 people found this instruction helpful.
  • William from Rocky Mount, VA
  • Easy
  • 30 - 60 mins
  • Screw drivers, Socket set
I opened the top and front of the dryer. 1st I pulled out the drum and cleaned up the lint and mess from the busted support roller. Next it was a matter of looking at the enclosed drawing and instructions. I could not believe it was that easy.
Was this helpful?
Thank you for voting!
Shutting off and had to wait before could turn back on
2 of 2 people found this instruction helpful.
  • Allen from KENNETT, MO
  • Really Easy
  • 30 - 60 mins
  • Screw drivers, Socket set
Followed online video very easy and dryer works like new one....
Was this helpful?
Thank you for voting!
Making all types of squealing noises
3 of 5 people found this instruction helpful.
  • Kevin from White Haven, PA
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers, Socket set
I changed the belt, tension pully and rollers. Runs like new now. I also took the opportunity to clean it out real good while I had it apart.
Was this helpful?
Thank you for voting!
Loud screeching when dryer tumbles
2 of 2 people found this instruction helpful.
  • Joan from MANLIUS, NY
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers, Socket set
We had to pop open the top. Unscrew front of dryer from sides. Disconnecting the wires was a bit more difficult than expected. We had to use a tiny screwdriver to slide into the sides of the white wire connector on each side before pulling apart. Front drum falls when front of dryer is removed. It took two of us to reassemble - one to hol d the drum while the other put the front on. Our problem turned out to be one wheel. We replaced both wheels and saved the rest of the parts. Hums along just fine.
Was this helpful?
Thank you for voting!
Rollers making a noise.
2 of 2 people found this instruction helpful.
  • Carl from MARION, KY
  • Really Easy
  • More than 2 hours
  • Nutdriver, Pliers, Socket set
Removed the top, removed lower front cover, removed the front, removed the belt, removed the drum and the back. Removed and replaced roller support shaft and drum roller’s. Completed all Front and rear support for drum. Replaced drum , replaced drum roller belt and replaced back, completed replacement of the top, front.
Was this helpful?
Thank you for voting!
Dryer was making a loud squeaking noise
2 of 2 people found this instruction helpful.
  • James from Toccoa, GA
  • A Bit Difficult
  • More than 2 hours
  • Nutdriver, Socket set
I followed the video instructions. I took my time as this was a first for me. The disassembly was fairly straightforward. The belt idler pulley was definitely the problem as it wouldn’t turn at all. I decided to replace the support rollers also even though they seemed to be ok. Everything I had read said my model only needed 4 rollers bu t actually needed 6. I had to place a second order for those. Putting it all back together was fairly easy. Overall I had a good experience. Only a few tools were needed for this repair. Thank you,
Was this helpful?
Thank you for voting!
Very loud squeaking!
2 of 2 people found this instruction helpful.
  • Travis from GARRETT, IN
  • Really Easy
  • 30 - 60 mins
  • Screw drivers, Socket set
Couple screws behind the electrical panel at the top and the top pushed back and was able to remove front panel, and then it was pretty easy. Take the two screws on top front, lint trap screws . The lint trap vent needs to come off. Then the belt, drum comes out to access the idler pulley. I did replace two drum wheels, I saw there was 5. I would recommend replacing all of them, they didn’t move well…..
Was this helpful?
Thank you for voting!
Will Not Tumber
3 of 6 people found this instruction helpful.
  • JOHN from PUNTA GORDA, FL
  • Really Easy
  • 1- 2 hours
  • Pliers, Screw drivers, Socket set, Wrench (Adjustable)
I use the manentance kit that was not the problem. I end buying the drive motor and that was it. I was happy with the service I got from part select, overnight mail what more could I ask for? I am also glad I replace everthing with mainentance kit. Thank you for your help john degnan
Was this helpful?
Thank you for voting!
Drum quit turning due to broken belt
3 of 6 people found this instruction helpful.
  • JENNIE from NORTH ROYALTON, OH
  • Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
Followed the included instructions in the Maintenance kit. Very easy to understand & follow. Only advice is to have an extra set of hands to assist in re-installing drum w/ the new belt. Entire disassembly & reassembly could be done w/ basic hand tools but went alot quicker using a cordless drill w/ a set of nut/screw driver bits.
Was this helpful?
Thank you for voting!
dryer was making a grinding noise
2 of 3 people found this instruction helpful.
  • Scott from MUNCIE, IN
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
I researched causes of the noise, zeroed it down to the idler pulley. I then got the dryer schematic and took the dryer apart after disconnecting the power and the vent. i did not have to remove the drum, the idler pulley was easily accessible once the top and back panels were removed. I simply removed the drive belt from tension off the pulley, removed the old pulley and installed the new one. Once finished the dryer was running whisper quiet.
Was this helpful?
Thank you for voting!
Broken dryer belt
3 of 6 people found this instruction helpful.
  • Mary from SCHENECTADY, NY
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Took the two screws holding the lint trap to top. Used a putty knife to loose the clips holding the top of the dryer up so it could be hindged up for access. Used a nut driver to remove the four screws hold the front door on. Removed the lower dust panel, just clips holding in on. Pull the dryer drum out along with the broken belt and ol d belt tensioner. Took shop vac and cleaned lint and removed about $2.00 of loose change from the base. Installed the new drum supper wheels. Held belt around drum to put back in. Looped the belt through tensioner and around motor drive pulley as shown in instructions. Put front door on only to find the felt around the door had slipped making the drum hard to turn. Pulled the door back off and laid the dryer on it's back before putting the door back on , so you can run your hand around the door to make sure the felt go inside the drum. Put the four screws back in the door panel before uprighting the dryer. Sucess the drum turned freely. Put other remaining panel and srews in lint trap . Hook the dryer back up to vent, power and gas, and turned on the dryer. Runs like new!
Was this helpful?
Thank you for voting!
Dryer kept throwing the E1 error indicating the thermistor needed replacement
2 of 3 people found this instruction helpful.
  • Rory from LEESBURG, VA
  • Easy
  • 15 - 30 mins
  • Socket set
Unplugged the Dryer first. Removed the two screws from the bottom panel using a 1/4 socket and removed the panel by pulling down and out. Reached behind the blower and removed the connectors from the old thermistor and then the thermistor itself by removing the two 1/4 inch hex head screws. Replaced with new part and after screwing back i n, reconnected the wires and replaced the panel. From start to finish, it took me about 20 minutes.
Was this helpful?
Thank you for voting!
I had only seen a one piece rack .The 2 piece threw me for a loop.
1 person found this instruction helpful.
  • Keith from Shawnee, KS
  • Easy
  • 15 - 30 mins
I thought I had checked the arm piece of the rack real good for a product number on my original part but I missed the number till the 2nd box came in, and a looked real careful and realized it was the same as the order I thought was bad.
Put the spring arm in first and the rack will fit in the front groove.
It would have bee n good if there had been a picture of the dryer arm attached to the dryer.
So I have 2 good racks and will return one if you tell me where to send it.
Keith Walden..
Was this helpful?
Thank you for voting!
Belt
1 person found this instruction helpful.
  • MARY from PORT ALLEN, LA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
My son did the repairs it took less than 30 minutes it's an old dryer so glad to be able to get the parts. I do not like the new dryers because of all the pushbuttons thanks so much for the ports
Was this helpful?
Thank you for voting!
All Instructions for the 110C68132413
76 - 90 of 211