110C68132413 Kenmore Dryer - Instructions

All Instructions for the 110C68132413
61 - 75 of 211

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Squeaky dryer
3 of 3 people found this instruction helpful.
  • robert from ELMA, WA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Ezee pezee lemon squeezee.
Was this helpful?
Thank you for voting!
Broken belt
4 of 6 people found this instruction helpful.
  • Mark from MILFORD, CT
  • Very Easy
  • 15 - 30 mins
  • Pliers, Screw drivers, Socket set
As seen in video, All Good !
Was this helpful?
Thank you for voting!
Broken door catch
3 of 3 people found this instruction helpful.
  • Christine from Virginia Beach, VA
  • Very Easy
  • Less than 15 mins
  • Screw drivers
The original door catch had broken and would no longer stay shut. Ordered the part from this site with ease. Very easy to replace the broken door catch on my Amana dryer. Tool needed was a flat head screwdriver to loosen the cover, remove broken piece and easily replace with new part. Followed the video and it was back to normal operation within minutes.
Was this helpful?
Thank you for voting!
dryer making noise. order parts
4 of 6 people found this instruction helpful.
  • Thomas from TULELAKE, CA
  • Very Difficult
  • 30 - 60 mins
YOU NEVER SENT ME THE PARTS!!!
I had to drive to a parts store to find them. On January 17, 2024, I tried to call you when the parts did not arrive and your recording said there were no reps available and you hung up. WE CANNOT GET HELP TO CANCEL THIS ORDER. We have been going in circles with PartSelect and shipping. SO, how do I get my refund of the $107.26 for the parts that I never received!!
Was this helpful?
Thank you for voting!
Dryer would squeal when the drum was turning
3 of 3 people found this instruction helpful.
  • Clinton from MINOOKA, IL
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
I followed the very informative video and wrote down step-by-step notes for myself. The repair went very smoothly. The only thing I didn't realize, was that the dryer has 4 rollers, not just 2 shown in the video. All are easy to access once you disassemble. I had to do it twice since I had to order 2 more rollers in order to replace t hem all. Also, the triangle plastic washers come with the roller, so you won't need to order them separately like I did. I also changed the idler pulley roller while I was in there since that has bearings too. Just as easy. I'm very happy with my quiet dryer! One last note: The new rollers are a bit louder than normal at first, but they quiet down very quickly as you use the dryer. It must be because they are brand new.
Was this helpful?
Thank you for voting!
Dryer would shut off mid way through cycle and give an E1 error code
5 of 9 people found this instruction helpful.
  • Dwayne from Bainbridge, PA
  • Easy
  • 15 - 30 mins
  • Pliers, Socket set
After turning off the power to the dryer I removed two screws to the bottom front panel and droped it out of the way. I remved three screws hloding the lint screen in place just for better axcess to the element. I then removed the two wires attached to the element and then the two screws holding the element in place. I put everything back together in reverse. I also took the time to clean any dust and lint out.
Was this helpful?
Thank you for voting!
Drum would not turn. Broken Belt
5 of 10 people found this instruction helpful.
  • Ray from Boulder Creek, CA
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Removed top cover. Removed front cover. Removed Drum. Located the broken belt. Found that there was no tensioner in the unit. Replaced drum rollers. Put in new tensioner. Repaced Drum with belt around it. Installed belt through tensioner and onto drive pully of motor. Supported Drum with wood block. Turned on dryer to insure drum turned w ithout any problems. Removed wood block. Replaced front cover and top cover. Repair compete.
Was this helpful?
Thank you for voting!
Loud squeaking noise
3 of 4 people found this instruction helpful.
  • Steven from WICHITA, KS
  • Really Easy
  • 30 - 60 mins
  • Pliers
Replaced the most worn drum wheel any lubed the belt tension arm pulley. The noise didn't go completely away. There are 4 drum wheels. I need to order 3 more wheels and the tension arm now.
Was this helpful?
Thank you for voting!
Dryer won't start.Only make a click noise.
3 of 4 people found this instruction helpful.
  • Candido from GREENVILLE, TX
  • Easy
  • Less than 15 mins
  • Screw drivers, Socket set
Remove top,front and panels.change thermal fuse and outlet thermistor.
Was this helpful?
Thank you for voting!
door catch had crackedt
2 of 2 people found this instruction helpful.
  • stephen from tewksbury, MA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
took out old ,twisted in the new one it was nice to have the right part the first time!! thank-you
Was this helpful?
Thank you for voting!
door catch broke
2 of 2 people found this instruction helpful.
  • Debra from BLASDELL, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Remove the protective cover on door with screwdriver, pop out the old catch, snap new catch in place, replace protective cover
Was this helpful?
Thank you for voting!
Door would not stay closed.
2 of 2 people found this instruction helpful.
  • Wanda from SHELBYVILLE, KY
  • Very Easy
  • Less than 15 mins
  • Screw drivers
Replaced door catch on dryer door. Followed video on Whirlpool website and it took less than 10 minutes. The dryer works great.
Was this helpful?
Thank you for voting!
The Dryer door would not latch. The door latch was broken and needed to be replaced.
2 of 2 people found this instruction helpful.
  • Douglas from WINCHESTER, VA
  • Very Easy
  • Less than 15 mins
  • Screw drivers
Once I received the new latch I removed the latch cover with the flat head screw driver and worked out the old latch. I then positioned the new latch and snapped in place. I then replaced the cover and shut the Dryer door. The door latched and the repair was complete.
Was this helpful?
Thank you for voting!
the metal plate connecting the door catch was broken, so I ordered the part
2 of 2 people found this instruction helpful.
  • Cris from GLENDALE, CA
  • Really Easy
  • Less than 15 mins
I pushed one end of the catch on upper side the hole and when locked, I pushed the other end of the catch to the lower side to get locked. To complete, the white cover was inserted on top of the catch and done.
Was this helpful?
Thank you for voting!
No leveling feet on dryer.
2 of 2 people found this instruction helpful.
  • Bobbie from BEND, OR
  • Very Easy
  • Less than 15 mins
  • Wrench (Adjustable)
This could not have been easier. The hardest part was tipping the dryer over on its' side.
Instructions:
1. Tip dryer over onto a non-scratch surface. I used a tarp on the floor.
Insert leveling foot into the foot opening on the bottom of the dryer &
screw in with fingers until it is difficult to turn.
2. Use t he adjustable wrench on the hexed foot (not the threads) to adjust to the desired level.
3. Tip dryer upright taking care not to exert pressure on the feet closest to floor. I used a folded-up tarp under the bottom edge of the dryer while lifting it to the upright position.
4. Use a level, back to front & side to side, to determine if feet need further adjustment.
5. Adjustments can be made with the dryer in the upright position, using the adjustable wrench on the hexed foot.
Was this helpful?
Thank you for voting!
All Instructions for the 110C68132413
61 - 75 of 211