- Home
- 1106118721
- Instructions
1106118721 Kenmore Dryer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken door actuator spring -interposer for motor control
1 of 2 people
found this instruction helpful.
-
Stephen from Vancouver, WA
- Really Easy
- Less than 15 mins
-
Screw drivers
Followed previous comments and took 5 minutes to replace. Be careful to hold spring and switch together because easy to separate and drop. Two screws to remove for switch, two to remove for lint trap, pop the lid up and switch / spring is easy to access.
Was this helpful?
Thank you for voting!
Dryer Door Wouldn't Shut
1 of 2 people
found this instruction helpful.
-
Megan from Kettering, OH
- Really Easy
- Less than 15 mins
My husband is the one who fixed the door. He said he just popped it into place and was done in just a couple of seconds! The best part though was the quick service we received. . . I ordered the part around 10:30 in the morning, and it was at my front door by 5pm the next day!!! What great service!!!! We will definitely do business a
... Read more
gain with partselect. Com if we ever need more parts.
Read less
Was this helpful?
Thank you for voting!
Door wouldn't fasten shut
1 of 2 people
found this instruction helpful.
-
Susan from Laingsburg, MI
- Really Easy
- Less than 15 mins
-
Screw drivers
Popped the latch out and popped a new one in.
The real story here is that there was an ANSWER and a SOLUTION, to what was a GREAT
annoyance. If I wouldn't have found a part, I may have run off and bought a new dryer, when I really didn't need to, or paid A LOT of money for a repair man to come out. THANK YOU for your se ... Read more rvice. You made my life easier.
The real story here is that there was an ANSWER and a SOLUTION, to what was a GREAT
annoyance. If I wouldn't have found a part, I may have run off and bought a new dryer, when I really didn't need to, or paid A LOT of money for a repair man to come out. THANK YOU for your se ... Read more rvice. You made my life easier.
Read less
Was this helpful?
Thank you for voting!
Dryer door kept opening
1 of 2 people
found this instruction helpful.
-
Jennifer from Big Timber, MT
- Easy
- Less than 15 mins
-
Screw drivers
Popped out the old door catch kit and replaced it with the new one! Easy!!
Was this helpful?
Thank you for voting!
The male part of the door catch was broken
1 of 2 people
found this instruction helpful.
-
David from Chhicago, IL
- Really Easy
- Less than 15 mins
Simply installed the piece and I was done. Took 10 seconds.
Was this helpful?
Thank you for voting!
Dryer door wouldn't shut
1 of 2 people
found this instruction helpful.
-
Amy from Cumberland, RI
- Really Easy
- Less than 15 mins
The door catch kit is soo easy. They give you instructions on which one to use depending on your dryer and it fit perfectly into the door. This was great especially since it was so inexpensive! My husband thought we would have to replace the door.
Was this helpful?
Thank you for voting!
Door keeps opening while operating
1 of 2 people
found this instruction helpful.
-
Carmine from MASSAPEQUA PK, NY
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Removed old catch and strike with screwdriver and needle nose pliers. Installed new parts. My old catch did not have comparible numbers so I just used the yellow one. Worked fine.
Was this helpful?
Thank you for voting!
Lid switch failed, dryer stopped working
1 of 2 people
found this instruction helpful.
-
Rick from BETHESDA, MD
- Really Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers, Socket set
Order replacement lid switch, installed it, good to go. The installation video and instructions with the replacement part were very helpful.
Was this helpful?
Thank you for voting!
washer continued to spin when you raised the lid not shutting off
1 of 2 people
found this instruction helpful.
-
Daniel from TRENTON, NJ
- Really Easy
- 30 - 60 mins
-
Screw drivers
Your web site is amazing Ive enjoyed watching your videos,this is a really great way to see what it takes to repair your washer very informative. Steve was a good teacher for me I just followed along as he explained each step and my washer came apart just like he said.
... Read more
I removed the two front console screws and pulled slightly forward and lifted console up and tilted it back where it was out of the way. next I was able to lift cabinet up from the back and remove it from the frame and lay cabinet on the floor on top of a rug I had to protect the finish on cabinet . Now I had access to the lid switch and simply removed the two screws in the cabinet and the old switch. I connected the two wire connections to the new switch (no)normally open connection, used same actuator the instructions say to do this because the one that comes with the new switch won't fit so use the old one. on my washer there's a cover that fits under this switch and It took me a little longer to get the screws to line up so they fit through the switch and into the cover but It worked fine. Now all I had to do was reinstall the cabinet just like Steve did on the video my only problem with this was seeing where the tabs in the frame were located so that the slots in the cabinet would fit over top of frame tabs I used a flash light in one hand and lowered the cabinet down I held the light on the frame tabs and the slots in cabinet fit right in then lowered cabinet to the rear frame tabs where i just had to push slightly on the sides of cabinet and it fit right in.Next i pushed the back panel in place and on the top of washer just like in video reinstalled both spring clip clamps and the console and reinstalled the two screws. I plugged in the washer put drain hose back in drain pushed washer back in place turned it on working great now ! Thank You so much for your help Dan.
Read less
Was this helpful?
Thank you for voting!
dryer latch engagem ent
1 of 2 people
found this instruction helpful.
-
Earl from Terre Haute, IN
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
our son was able to diagnosis and order the part and very pleased with quite response. Dryer now working fine.
Was this helpful?
Thank you for voting!
Clanging of dryer when rolling
1 of 2 people
found this instruction helpful.
-
John from Bel Air, MD
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Followed video on PartsSelect website, they made it real easy.
Was this helpful?
Thank you for voting!
washer would fill with water but not start
5 of 15 people
found this instruction helpful.
-
Edward from Nanuet, NY
- A Bit Difficult
- 15 - 30 mins
-
Nutdriver, Screw drivers
took part top of washer saw switch replaced it not to difficult it is always easier when you have new one to look at
Was this helpful?
Thank you for voting!
burned oven bulb
3 of 9 people
found this instruction helpful.
-
Ivanka from Atlantra, GA
- Really Easy
- 30 - 60 mins
-
Pliers, Screw drivers
The hardest part was taking out original light bulb because screws on shield where hard to unscrew after all this years . The old bulb vent out leaving neck in socket. It took narrow electrical pliers to get neck out .The generic appliance bulb did not fit and had aluminum neck ,not recommended for brass sockets in ovens.Putting new ligh
... Read more
t bulb in was not the problem.
Read less
Was this helpful?
Thank you for voting!
Door Gasket Broke into pieces
1 of 3 people
found this instruction helpful.
-
Cheryl from Phoenix, AZ
- Really Easy
- Less than 15 mins
It was so easy! I simply fit the gasket into the groove where the old one had been. Didn't even need any tools.
Was this helpful?
Thank you for voting!
the door catch was broken and I was using duct tape to close the dryer!!
0 of 1 people
found this instruction helpful.
-
margery from Lake Spivey, GA
- Really Easy
- Less than 15 mins
-
Pliers
This was a classic easy repair and I am sure saved us bundles on a service call.
Was this helpful?
Thank you for voting!