1106118721 Kenmore Dryer - Instructions

All Instructions for the 1106118721
76 - 90 of 197

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Door catch was cracked
1 person found this instruction helpful.
  • Tammy from glenford, OH
  • Very Easy
  • Less than 15 mins
Incredibly simple! You just pop the other plastic catch out with a butter knife and pop the other on in. This is the second time I have done this over the last 4 years or so.
Was this helpful?
Thank you for voting!
dryer door wouldn't catch, catch was broken
1 person found this instruction helpful.
  • Theodore from Tyler, TX
  • Really Easy
  • Less than 15 mins
took the cstch reciever out, with my fingers, pushed the new one in, snap lock fit.......couldn't be better, like repairing a model T ford.......
Was this helpful?
Thank you for voting!
broken door catch
2 of 4 people found this instruction helpful.
  • Michael from Goddard, KS
  • Really Easy
  • Less than 15 mins
the part fit perfectly, it just snaped right into place.
Was this helpful?
Thank you for voting!
dryer door won't stay shut
2 of 4 people found this instruction helpful.
  • Diana from Canfield, OH
  • Easy
  • Less than 15 mins
  • Pliers, Screw drivers, Wrench (Adjustable)
I replaced the male end first hoping that a change in the female part would not be needed. Unfortunately no. I used needle nosed pliers to pry the male part out and pushed the new part in. The female part of the door catch was more difficult. I didn't do it in "textbook" form, but got the job done with pliers and a screwdriver. Worth ever y penny to fix correctly instead of rigging it. Do it!
Was this helpful?
Thank you for voting!
door catch broke therefore dryer door would not close
1 person found this instruction helpful.
  • vernette from sprague, WA
  • Really Easy
  • Less than 15 mins
just put the new part in the door---sooo easy! THANK YOU!
Was this helpful?
Thank you for voting!
Dryer door would not stay closed
1 person found this instruction helpful.
  • Gregg from St. Augustine, FL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
After removing front door panel (2 screws) I removed the old latch catch and replace with the new part. 4 minutes later, the door was back together, the dryer was running and the door was staying closed.
Was this helpful?
Thank you for voting!
Won't pump out the water
1 person found this instruction helpful.
  • Victor from NORFOLK, VA
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
Order the part and put the new part on and put the washing machine cabinet back on and check the washer for the water filled up and then it's starting to go on the spin cycles.
Was this helpful?
Thank you for voting!
Broken door switch
2 of 4 people found this instruction helpful.
  • john from el paso, TX
  • Really Easy
  • Less than 15 mins
  • Screw drivers, Wrench (Adjustable)
I took out the 2 screws that are located on the top of dryer under the lint filter door. Popped up the whole top of dryer. Opened the dryer door to unscrew the 2 door switch screws. Took off the old broken door switch through the open dryer top and before replacing the new door switch completely I tested it by turning the dryer on and pressing the new switch against the button activator 2 find out if it works. When it did, I carefully put the door switch back so the dryer door can activate it properly and screwed in the 2 screws. Finally, I put the dryer top back down & fastened the last 2 screws under the lint filter door.
Was this helpful?
Thank you for voting!
broken door catch
1 person found this instruction helpful.
  • Susan from HUDSON, MA
  • Very Easy
  • Less than 15 mins
  • Pliers, Screw drivers
I followed your short video and found it very easy to do
Was this helpful?
Thank you for voting!
The door whould not close enough for the dryer to work.
1 person found this instruction helpful.
  • Frank from Union Beach, NJ
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Got my parts very quickly.
Popped out the old door latch with a screw driver and pressed in the new one.
Very simple.
Thanks Parts Select.
Was this helpful?
Thank you for voting!
dryer wouldn't turn on
1 person found this instruction helpful.
  • Kim from Northridge, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I removed the two screws on the top by the lint catcher. Then, per information from this website, I pried up the top. I reached down into the dryer and removed the two screws on the broken door switch and replaced it with the new part. I am a recently widowed, 55 year old and was thrilled to find good advice, information and instructions on your website!! Simple as could be!
Was this helpful?
Thank you for voting!
The dryer door catch wouldn't hold the door closed
1 of 2 people found this instruction helpful.
  • Gerald from Thompsonville, MI
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I ordered the door catch kit on a Wednesday at it arrived Saturday AM. It took less than 1 minute to pry out the old catch with a flat screwdriver and pop in the new one!
Was this helpful?
Thank you for voting!
Received part in 3 days from ordering. I was surprised when it showed up at my front door so quickly. Less than 1/2 hour later we were drying laundry again. Very impressed with the speed of service and the price.
2 of 5 people found this instruction helpful.
  • Patrick from Ramsey, MN
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First removed 2 screws on lint remover vent. Used a screw driver to force up top of dryer from out front. These will require pressure to pop the top off the dryer. Once the top was up I could reach the actuator and remove the 2 screws holding it. Once removed just replaced with new actuator and bam, done. Snapped top of dryer back on a nd reinstalled 2 screws on lint vent and Done. Easy, no problem....Thank you PartSelect!!.
Was this helpful?
Thank you for voting!
The latch on my dryer door wasn't working. I was having to shove a towel in the door to get it to stay shut until I was able to repair it.
1 of 2 people found this instruction helpful.
  • Dan from Lockport, LA
  • Really Easy
  • Less than 15 mins
All I had to do was get the model number off of the dryer and plug that information in online and within a couple of days the part arrived. It was great! There were directions that came with the part that explained how to replace the old latch with the new one.

I remember in the "olden days" when I would of had to call a repai r guy out and paid a lot more than the $12.00 I did to replace the part myself. And, the only reason it was $12.00 dollars instead of $5-6 was because I had it shipped overnight.

Awesome!
Was this helpful?
Thank you for voting!
Door latch snapped off.
1 of 2 people found this instruction helpful.
  • Karen from Randle, WA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
We got the part so fast we were both surprised. My husband installed the part by just seeing how the old one came off. It was simple and fairly quick. Except that his hands are so big they had a hard time fitting in to where the part needed to go. Just opened the top of the dryer, took the old part out and put the new one in.
Was this helpful?
Thank you for voting!
All Instructions for the 1106118721
76 - 90 of 197