110211 Kenmore Washer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
screeching noise at times,Wouldn't spin out
4 of 5 people
found this instruction helpful.
-
Jerry from LENGBY, MN
- Very Easy
- 15 - 30 mins
-
Nutdriver, Pliers, Screw drivers
Tip washer on its front removed belt guard and belt. Removed shift actuator. Put new actuator on, put belt and guard back on, put back panels on and it was fixed.
Was this helpful?
Thank you for voting!
I noticed that in the spin cycle the machine did not sound like it was suppose to. So I took the time and watched it go thru the steps and saw that it was not spinning.
4 of 5 people
found this instruction helpful.
-
Fernando from Houston, TX
- Really Easy
- Less than 15 mins
-
Socket set
Went on line and ordered the piece I need. I got my socket set out, held the center piece in place then with the socket unscrewed the bolt. Popped the plastic washer off put the agitator clips in, put the plastic washer on and bolted it back together and was done. Easy as 1, 2, and 3.
Was this helpful?
Thank you for voting!
water inlet valve stopped working
3 of 3 people
found this instruction helpful.
-
Zoran from ROCKVILLE, MD
- Really Easy
- 1- 2 hours
-
Pliers, Screw drivers, Wrench (Adjustable)
used the Parts.com video. I am not mechanical at all, but removed the old part and installed the new part without a hitch. Very happy.
Was this helpful?
Thank you for voting!
Did not Agitate, spun freely.
4 of 6 people
found this instruction helpful.
-
Todd from hampstead, NC
- Easy
- Less than 15 mins
-
Socket set
Used screw driver to pop top off to access the bolt on spinning unit.Used socket wrench and took bolt off of bottom of spinniner. Replace agitater with new parts and reassembled. Now it works like new.
Was this helpful?
Thank you for voting!
Non functioning upper agitator
3 of 3 people
found this instruction helpful.
-
William from RENO, NV
- Very Easy
- Less than 15 mins
-
Screw drivers, Socket set
I needed the washer ASAP. I paid extra for the expedited shipping. The parts arrived as promised. I watched the on-line video. I read and followed the included instructions. Removed cap and nut. Pulled out part with "dogs", swapped new dogs and assembly. Re-installed components, I was wary from information gleaned from the video, wh
... Read more
ich warned of proper orientation of "dogs", as they can be inserted backwards. Tightened bolt and re-installed cap. Presto! Repaired washing machine worked as good as new. My coffee didn't even get cold.
Read less
Was this helpful?
Thank you for voting!
washer was draining but no spinning
3 of 3 people
found this instruction helpful.
-
JOSE from MILLBURY, MA
- Really Easy
- Less than 15 mins
-
Screw drivers, Socket set
Disconnect electrical plug from the wall, disconnect drain hoses and tip washer forward remove belt hosing basket and then remove the electrical plug that contains seven wires connected to actuator then remove the two small screws.
Then reverse the operation to stall the new part. Very easy.
Then reverse the operation to stall the new part. Very easy.
Was this helpful?
Thank you for voting!
Broken agitator top section...
3 of 3 people
found this instruction helpful.
-
Dan from GREAT FALLS, MT
- Really Easy
- Less than 15 mins
-
Socket set
Removed softener cup agitator cap and one bolt, lifted agitator out and replaced with new one... tightened bolt replaced cap and softener cup and away we go, done...
Was this helpful?
Thank you for voting!
Auger part of agitator not pulling down clothes.
4 of 6 people
found this instruction helpful.
-
Jeffrey from CAMP HILL, PA
- Very Easy
- Less than 15 mins
-
Socket set
Popped off agitator cover discovered worn and broken 'dogs'. Decided to replace complete agitator assembly due to age of machine (25 + years). 7/16 socket, removed nut and agitator assembly, installed new assembly with included nut.
Was this helpful?
Thank you for voting!
continually reached FL code
3 of 3 people
found this instruction helpful.
-
Woody from Gordon, GA
- Really Easy
- Less than 15 mins
-
Socket set
Removed Back and top of digit front. removed water intake valve part order new part replacing was a breeze
Was this helpful?
Thank you for voting!
Lid lock not working.
5 of 9 people
found this instruction helpful.
-
James from LIVONIA, LA
- Very Easy
- 15 - 30 mins
-
Socket set
Followed instructions.
Was this helpful?
Thank you for voting!
upper Agitator not working
3 of 3 people
found this instruction helpful.
-
Edward from Grand Blanc, MI
- Easy
- 15 - 30 mins
-
Screw drivers, Socket set
undo one bolt and change agitator kit
Was this helpful?
Thank you for voting!
Top agitator did not work
3 of 3 people
found this instruction helpful.
-
George from Danbury, WI
- Really Easy
- 15 - 30 mins
-
Screw drivers, Socket set
I removed the cover for the softener dispenser on the top of the agitator. Then reached in and removed the cover of the nut and washer which was very sticky and sealed with an o-ring. This took a bit of pressure. Then used a socket wrench with an extension to loosen the bolt and took the whole agitator out of the machine. Then I set the a
... Read more
gitator on the floor and with a fine 12 inch long screw driver released the catches while turning and pulling the agitatior with my other hand and holding the lower agitatior on the floor with my feet. I then turned the upper part over and removed the cogs and holding mechanism.
Then I reversed the process after replacing the cogs with the new part. 25 minutes total.
Then I reversed the process after replacing the cogs with the new part. 25 minutes total.
Read less
Was this helpful?
Thank you for voting!
cold water inlet valve bad
3 of 3 people
found this instruction helpful.
-
Doris from CONCORD, NC
- Easy
- 15 - 30 mins
-
Screw drivers
Ordered the inlet assembly from this site. Received it the day after I received the notice it shipped. Watched their video of how to replace the part. Easy job, done in 15 minutes. Only needed a screwdriver to take the cover off the back of the washer control panel. A company wanted $400 to replace the part.
Definitely recommend the ... Read more company and will use again.
Definitely recommend the ... Read more company and will use again.
Read less
Was this helpful?
Thank you for voting!
Burning smell, ASSUMED it was the belt
4 of 6 people
found this instruction helpful.
-
James from MAHWAH, NJ
- A Bit Difficult
- 30 - 60 mins
-
Nutdriver
Once we put the washer on it's side noticed lots of oil on the floor and in the belt cover area. Replaced belt anyway but issue is the leaking transmission. Starting warranty process since Maytag carries a 10-year part warranty and machine is 6.5 years old. Wish me luck !!!
Was this helpful?
Thank you for voting!
Washer walking during spin cycle
3 of 3 people
found this instruction helpful.
-
Tricia from HARLEYSVILLE, PA
- Easy
- 30 - 60 mins
-
Socket set
Watched video and followed instructions. Removed rods from top cups, laid washer on its side and pulled them out. Put new rods thru, stood washer up and hooked them in. Was pretty easy, tube heavy but I'm 52 and I did it myself.
My only problem is there's no springs anywhere attaching rods to tub and I cannot find any info on 1. IF ... Read more I need them 2. What kind I need. I sent email to partselect last week inquiring and still waiting to hear.
My only problem is there's no springs anywhere attaching rods to tub and I cannot find any info on 1. IF ... Read more I need them 2. What kind I need. I sent email to partselect last week inquiring and still waiting to hear.
Read less
Was this helpful?
Thank you for voting!