Electrolux Refrigerator Parts

Your Price

$40.49

Air Filter

★★★★★

30 Reviews

PartSelect Number PS1993820

Manufacturer Part Number EAFCBF

This manufacturer-approved air filter system for refrigerators eliminates odors and any impurities. It does this by neutralizing and removing odor-causing molecules. For best results, it is important to change the filter every 6 months to ensure that food is kept fresh, and the humidity is controlled. This part measures about 7 inches wide and 5 inches deep. Follow installation instructions provided by the manufacturer when installing this part to ensure accurate results and further guidance. Remember to unplug the refrigerator from the power source before starting this project. The air filter may be located in different places depending on your appliance, but is usually on the inner right or left side. See your manual for exact location. Our customers rated this as a very easy repair that takes only a few minutes; just locate and remove the old air filter and insert the new one to complete the repair, which requires no tools.

Fixes these symptoms

Fridge too cold
Fridge too warm
Ice maker not making ice
See more...

Videos!

Your Price

$116.13

Refrigerator Water Inlet Valve

★★★★★

38 Reviews

PartSelect Number PS7784018

Manufacturer Part Number 242252702

Fixes these symptoms

Ice maker dispenses too little ice
Ice maker not making ice
Ice maker won’t dispense ice
See more...

Your Price

$29.56

Upper or Lower Mullion Hinge Pin

PartSelect Number PS2358752

Manufacturer Part Number 241779401

Sold individually.

Fixes these symptoms

Door Sweating
Door won’t open or close
See more...

Your Price

$137.15

Air Handler Housing

★★★★★

2 Reviews

PartSelect Number PS11773268

Manufacturer Part Number 5303918784

Your Price

$65.32

Temperature Sensor

★★★★★

1 Review

PartSelect Number PS1765215

Manufacturer Part Number 240597203

Fixes these symptoms

Fridge too cold
Fridge too warm
See more...

Your Price

$96.71

Water Filter

★★★★★

3 Reviews

PartSelect Number PS2369689

Manufacturer Part Number EWF01

This is the replacement water filter for your refrigerator. It is white in color with a red cap, and is approximately 4 inches wide and 7 inches tall. The water filter reduces contaminants and improves taste in your refrigerator water supply. It is recommended that you replace the water filter every six months. You will find the water filter at the back, top portion of your fresh food compartment. To remove the filter, simply twist it to the left until it can be removed. Then, remove the cap on the new filter, line up the arrow with the indentation, and twist to the right until it is secure. You may want to put a towel down below the filter when completing this repair, to catch any spills or drips. When you replace the water filter, hold down the dispenser trigger for a few minutes so that all the air is purged from the water lines, and the water tank fills up. This is an OEM part and is sold individually. Per the manufacturer this filter has been updated and a new filter head will also be needed.

Fixes these symptoms

Ice maker not making ice
Not dispensing water
See more...

Your Price

$24.61

BLADE-CONDENSER FAN

★★★★★

1 Review

PartSelect Number PS11703633

Manufacturer Part Number 241639502

This is a genuine condenser fan blade, which works with refrigerators, freezers and wines and beverage coolers.

Fixes these symptoms

Fridge too warm
Noisy
See more...

Your Price

$25.16

Light Bulb

★★★★★

7 Reviews

PartSelect Number PS12751166

Manufacturer Part Number 316538904

Clear, 120 Volt, 40 Watt.

Videos!

Your Price

$15.15

Crisper Cover Support - Front

★★★★★

13 Reviews

PartSelect Number PS2358880

Manufacturer Part Number 241993101

This crisper cover front support is used to keep the crisper shelf in place and may need replacing if the door will not open or close. This white, OEM part measures roughly 1 inch in diameter and can be used for the front and the rear support, as designed by the manufacturer, and mounts to the inside cabinet wall. Replacing this part is an easy repair, and will require a small flat blade screwdriver, a putty knife, and a soft hammer. Remove the crisper and shelf from the refrigerator before replacing the support. The crisper cover front support is held in place with a locking pin. To remove the old part, you will first need to push the pin into the interior of the cabinet using the screwdriver, and then you can pull the support out with a putty knife. If you cannot get the pin out you can use a flat-blade screwdriver to push it down and out of sight and it will not harm anything in your refrigerator After removing the pin and attaching the new support, simply use the soft hammer to lock the new pin in place.

Fixes these symptoms