My Orders
Electrolux Refrigerator Switches
GET YOUR OFFICIAL Electrolux PARTS TO ENSURE VICTORY
Popular Electrolux Refrigerator Switches
This part turns the light on/off as the door opens and closes.
This part turns the light on/off as the door opens and closes.
This micro switch is a replacement electrical component that detects position or movement and sends signals to control functions. It is commonly replaced when an appliance does not respond correctly to door or control actions. Proper application should be verified prior to installation.
This micro switch is a replacement electrical component that detects position or movement and sends signals to control functions. It is commonly replaced when an appliance does not respond correctly to door or control actions. Proper application should be verified prior to installation.
This refrigerator light switch is a direct replacement designed to restore proper lighting functionality within your appliance. Measuring approximately 1.5 square inches, it features a clean white finish and activates the interior light when the door is opened. If your refrigerator light is no longer working as expected, this component may need to be replaced. Installation requires a nut driver set, a slot screwdriver, and protective work gloves to ensure safety and precision. This part is sold individually and is intended to fit securely in the designated switch housing for reliable performance.
This refrigerator light switch is a direct replacement designed to restore proper lighting functionality within your appliance. Measuring approximately 1.5 square inches, it features a clean white finish and activates the interior light when the door is opened. If your refrigerator light is no longer working as expected, this component may need to be replaced. Installation requires a nut driver set, a slot screwdriver, and protective work gloves to ensure safety and precision. This part is sold individually and is intended to fit securely in the designated switch housing for reliable performance.
This is the replacement light switch for your refrigerator. It is white in color and is approximately 2inches long and 1 inch wide. If the light is not working or stays on, you may need to replace the switch. It is an OEM part, directly from the manufacturer. Be sure to disconnect the refrigerator from the power source before you begin this repair. To remove the switch, simply use a flathead screwdriver to pop the switch out from the refrigerator wall, then disconnect the wires. Reconnect the wires to the new switch and snap it into place to complete your repair.
This is the replacement light switch for your refrigerator. It is white in color and is approximately 2inches long and 1 inch wide. If the light is not working or stays on, you may need to replace the switch. It is an OEM part, directly from the manufacturer. Be sure to disconnect the refrigerator from the power source before you begin this repair. To remove the switch, simply use a flathead screwdriver to pop the switch out from the refrigerator wall, then disconnect the wires. Reconnect the wires to the new switch and snap it into place to complete your repair.
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This refrigerator and freezer door reed switch magnet helps the appliance detect when the door is opened or closed. Designed as part of the door sensing system, it supports proper operation of interior lights, cooling functions, and door alarm features. This part may need replacement if the refrigerator fails to recognize the door as closed, causing issues such as interior lights staying on, temperature fluctuations, or constant open-door alerts.
This refrigerator and freezer door reed switch magnet helps the appliance detect when the door is opened or closed. Designed as part of the door sensing system, it supports proper operation of interior lights, cooling functions, and door alarm features. This part may need replacement if the refrigerator fails to recognize the door as closed, causing issues such as interior lights staying on, temperature fluctuations, or constant open-door alerts.
Compressor start relay kit is an original equipment manufacturer (OEM) part that fits some Kenmore, Frigidaire, Electrolux, Crosley, Gibson and White-Westinghouse refrigerators. It also fits some Kenmore, Frigidaire and Gibson upright freezers.
Compressor start relay kit includes the compressor start relay, run capacitor, wire harness adapter, 2 wire terminals, 2 wire connectors, 2 pieces of wire connection shrink tubing, the wire retaining clip and kit instructions sheet.
Clarification of instructions: Kit 5304491941 now uses a wire harness with white wires; attach the red compressor power wire to the wire harness adapter's white wire that plugs into the start device terminal at the outside edge of the start device.
Replaces original refrigerator and freezer compressor start relay part numbers 216649316, 218721119, 241524601, 241524605 and 5304468029.
Fits some refrigerators in the following series: Kenmore and Kenmore Elite 253; Frigidaire FRS, FRT, FRX, FSC, GLH, GLR, GS2, NGS, PHS, PLH and PLRS; Electrolux E23; Crosley CRSE; Gibson GRS and GRT; and White-Westinghouse WRS and WRT. Also fits some upright freezers in these series: Kenmore 253; Frigidaire FFU; and Gibson GFU.
Compressor start relay kit is an original equipment manufacturer (OEM) part that fits some Kenmore, Frigidaire, Electrolux, Crosley, Gibson and White-Westinghouse refrigerators. It also fits some Kenmore, Frigidaire and Gibson upright freezers.
Compressor start relay kit includes the compressor start relay, run capacitor, wire harness adapter, 2 wire terminals, 2 wire connectors, 2 pieces of wire connection shrink tubing, the wire retaining clip and kit instructions sheet.
Clarification of instructions: Kit 5304491941 now uses a wire harness with white wires; attach the red compressor power wire to the wire harness adapter's white wire that plugs into the start device terminal at the outside edge of the start device.
Replaces original refrigerator and freezer compressor start relay part numbers 216649316, 218721119, 241524601, 241524605 and 5304468029.
Fits some refrigerators in the following series: Kenmore and Kenmore Elite 253; Frigidaire FRS, FRT, FRX, FSC, GLH, GLR, GS2, NGS, PHS, PLH and PLRS; Electrolux E23; Crosley CRSE; Gibson GRS and GRT; and White-Westinghouse WRS and WRT. Also fits some upright freezers in these series: Kenmore 253; Frigidaire FFU; and Gibson GFU.
What this part fixes:
- Freezer section too warm
- Fridge and Freezer are too warm
- Fridge too warm
This start relay helps your refrigerator’s compressor start and protects it from overheating. It attaches directly to the compressor and installs easily. A dependable replacement that restores proper cooling and safeguards the motor.
This start relay helps your refrigerator’s compressor start and protects it from overheating. It attaches directly to the compressor and installs easily. A dependable replacement that restores proper cooling and safeguards the motor.
This door position and latch magnet is a small yet essential component designed to help detect and secure the closed position of a refrigerator or freezer door. Working with an internal sensor, it signals the control system when the door is shut while also providing magnetic holding force to keep the door sealed tightly against the cabinet. This helps maintain consistent internal temperatures, prevents cold air loss, and supports efficient operation. Made from durable materials for long-lasting performance, it is an ideal replacement for faulty magnets that cause issues such as persistent door alarms, interior lights staying on, or doors failing to seal properly.
This door position and latch magnet is a small yet essential component designed to help detect and secure the closed position of a refrigerator or freezer door. Working with an internal sensor, it signals the control system when the door is shut while also providing magnetic holding force to keep the door sealed tightly against the cabinet. This helps maintain consistent internal temperatures, prevents cold air loss, and supports efficient operation. Made from durable materials for long-lasting performance, it is an ideal replacement for faulty magnets that cause issues such as persistent door alarms, interior lights staying on, or doors failing to seal properly.
