Cooktop Elements and Burners

Cooktop Surface Element - 8 Inch 2600w

★★★★★

★★★★★

23 Reviews

This surface burner element is eight inches in diameter. It has five turns, 2600 watts and looped terminal ends. The element provides heat to the cooking surface on your range. If your element is not heating, you may need to replace this part. Please make sure the power has been disconnected and the element is turned off and had time to cool before starting your repair. The element is a genuine OEM part. It is sold individually.

Cooktop Haliant Element - 12 Inch

★★★★★

★★★★★

4 Reviews

If your GE stove isn’t heating evenly or one of the burners isn’t working, this dual radiant heating element could be the fix. It fits many GE flat-top ranges and has two sizes built into one—12 inches and 9 inches—so it works with different pan sizes. Made from tough materials, it heats up fast and helps cook your food evenly. Just check your model number to make sure it’s the right fit before ordering.

Cooktop Element

★★★★★

★★★★★

25 Reviews

Dual Radiant Surface Element

Cooktop Surface Element - 8 Inch 220v

★★★★★

★★★★★

12 Reviews

The coil burner element is eight inches in diameter. It has four turns, 220 volts and looped terminal ends. The coil burner element provides heat to the cooking surface on your range. You might need to replace this part if your element is not heating. It might have shorted out around the coil or the terminal block; you can test the coil to see if the burner or the switch may be at fault. Please make sure the power has been disconnected and the element is turned off and had time to cool before starting your repair. The element is a genuine OEM part and is sold individually.

Cooktop 6-inch Coil Burner Element

★★★★★

★★★★★

10 Reviews

This element has looped terminal ends and comes with a black medallion center. This element is a genuine OEM replacement part, has looped terminal ends, comes with a black medallion center, and fits most electric ranges. All burners are made of a heating wire that produces heat from electricity. Remove the non-functional burner element from the terminal block (or receptacle). Use a multi-meter to check for continuity. Check the end of the terminals for corrosion or heat damage. If there is corrosion or heat damage, replace the whole terminal block or receptacle at the same time you replace the damaged coil. Before you start this repair, make sure that the element is turned off and cool to the touch.

Cooktop Dual Radiant Element - 9 Inch

★★★★★

★★★★★

51 Reviews

This 9-inch radiant element sits under your cooktop and heats your pots and pans while you cook. If it’s not heating up or cooking unevenly, it’s time for a replacement. It’s the larger burner on your range and is sold on its own. Be sure to unplug your stove before installing the new one.

Cooktop Dual Surface Element - Front-right

★★★★★

★★★★★

7 Reviews

Cooktop Surface Element - 6 Inch

★★★★★

★★★★★

6 Reviews

Sold individually. This part is sold individually. This is a part for your stove top. The surface element is what your cookware sits on. The element supplies heat at varying temperatures. This may need to be replaced if the coil has shorted out or the terminal block shorted, and this caused the connectors at the end to burn out. The element is set in place by springs. You will need to push the springs in to release the old element. Make sure the drip bowl is lined up with the terminal block and press the new element into place.

Cooktop Burner Cap - 15k

★★★★★

★★★★★

6 Reviews

This is a replacement burner cap for your gas range or cooktop. The burner cap is found on the burner head, and prevents debris from getting into the head when it is not in use. The cap is black in color and is sold individually. It is a little more than 4 inches in diameter. To replace the burner cap, simply remove the damaged cap, and replace it with the new one. No tools are required for this repair. This is an OEM part from the manufacturer.

Cooktop Surface Burner - 8 Inch 2600w

★★★★★

★★★★★

6 Reviews

NOTE: The manufacturer recommends that you replace the burner receptacle at the same time.