The dual radiant element for your range or cooktop provides the heat that you cook with. It is found under the main cooktop. If your element will not heat, you will need to replace it with this part. This radiant element is 9 inches in diameter and is the larger of the two element sizes on your range. Be sure to disconnect your range from the power source before completing this repair. This radiant element is sold individually.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range, Cooktop.
This part works with the following products:
General Electric, Hotpoint, Haier.
Part# WB30T10133 replaces these:
AP4345739, 1474218
Customer Reviews
Average Rating:
★★★★★
★★★★★
49 Reviews
4.8
Filter By Rating:
5 Stars
40
4 Stars
9
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Bob S - March 21, 2021
Verified Purchase
Great service
I received the part in less than 24 hrs. Its installed and working great. Thanks for your great service. Much appreciated.
★★★★★
★★★★★
Stephen A - March 17, 2021
Verified Purchase
Easy repair
The part arrived on time as promised. I was very happy to find that it was an exact match/fit for the one that was being replaced, I mean in every detail. So it was just a matter of unplugging the old one and connecting the new. I am not that great with electrical repairs but this one was a piece of cake! My daughter was helping and she too was surprised how simple it was. THANK you very much! I
★★★★★
★★★★★
Thai V - October 19, 2019
Verified Purchase
It is easy to repair
Tell you the part is exactly for my oder you are doing very good,Thanks
★★★★★
★★★★★
Terry M - September 24, 2020
Verified Purchase
Element
The part that I got is okay but it is not what the problem is, I think it is in the dual control switch , at least I hope thats what it is. I will keep this part anyways. Thanks TM.
★★★★★
★★★★★
Andrea G - April 21, 2021
Verified Purchase
It works!
Repairing was difficult- no ones fault just a tricky assembly, but works great! Dual range with zero issue.
★★★★★
★★★★★
CHI Z - October 28, 2023
Verified Purchase
Great parts
Perfect fitting, very prompt delivery, easy to install, worth buying again!
★★★★★
★★★★★
Beau S - February 17, 2024
Verified Purchase
Replaced burner
Found the size required for our dual burner on the stove. Replaced in 5 minutes. Didn't think we could get a replacement and this one fit perfectly.
★★★★★
★★★★★
Michael O - December 17, 2023
Verified Purchase
GE Glasstop Stove Large Element Replacement
The part worked like a charm - my stove is working again and it was delivered on time as promised. Couldn’t be happier. Thx - Michael
★★★★★
★★★★★
Dave S - January 8, 2022
Verified Purchase
Oven Repair
Part was exactly what I needed!
★★★★★
★★★★★
KWONG-ON S - February 26, 2021
Verified Purchase
very good service, work perfect
The element was crack when received and I call the customer service. The lady process my refund and set up another order for me. The next day I received a new one. Fast delivery, very impressive. After installed it, work perfect. Thank You.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 6 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
9" Radiant Element did not heat up.
I started by Unscrewing the range top. 2 small screws. I took off the old piece by unclipping the piece . Then I color coded each wire so that I would know exactly where I would place the wires for the new part. 30 min maximum time spent changing the part. Please don't forget to unplug the range before you start.
Other Parts Used:
Andrea from ORLANDO, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
43 of 56 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Left front burner not working hot surface light stayed on
Shut off power at breaker panel Took screws out of front of range top lifted it up propped open unplugged wires took off two clips holding burner in place hardest part of job checked wire colors to right places put clips back on pulled out light right next to burner replaced put top down replaced 3 screws turned peer back on hood to go
Since this was the third time I did it all I had to take two screws out to lift the top of stove and replace element.
Other Parts Used:
Cheryl from JOHNSONVILLE, SC
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original heating Element was burned out
1st replacement part was damaged from Shipping. Parts Select sent a new one that i received in only a few days. our stove is slid into a granite island so the disassembly was not as simple as most. It was necessary to remove the controls, the controls housing & screws along the top of the oven door. Within an hour the stove was back in place and working perfectly. Great service from Parts Select
Other Parts Used:
Janice from ST CLR SHORES, MI
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Small radiant wasn't working but large was.
Ordered the dual replacement. I am 76 so I had someone else do it. It took him about 15 minutes. Just pulled the oven forward about 8" so he could lift the top up. 2 Screws to release the top. Then just removed the part and plugged in the replacement. Rescrewed the top screws and pushed the oven back.
Other Parts Used:
Joan from CLEMMONS, NC
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Heating element burned out
Followed example on YouTube! Very easy.
Other Parts Used:
William from CONCORD, MA
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
26 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Thomas
November 6, 2018
1. Right front burner stopped working, inner and outter
2. "hot surface" light stays on.Not sure if switch of burner, when switch is ohm'd out it seems ok, when element is ohm'd out it seems ok. is there any other device that can cause this .
the switch is either on "closed circuit" or off "open circuit" how does the switch control the heating range of the element. parts are easy enough to change just dont want to start throwning parts at it. thanks
For model number ps905dp2bb
Hello Thomas, thank you for your question. Usually if the element is not working at all, inner or outer ring, the issue is the element itself. The switch regulates the temp, so if the switch is the issue usually the element turns on, but can't be regulated. Also, when the hot surface light remains on, this is a good indicator that the element is bad. I would recommend replacing the element itself. I hope this helps!
51 people found this helpful.
Was this helpful?
Thank you for voting!
Catherine
January 3, 2019
The large part of the burner works but not the inner (small) burner
For model number jb700dn2ww
Hello Catherine, thank you for your question. The element itself probably has to be replaced. However, the issue could be the switch that controls that burner as well. We would recommend resting the switch first to be sure that isn't the issue. Here is a link that will show you how to test that switch.
https://www.partselect.com/Range-Stove-Oven+Infinite-Switch-Testing+repair.htm
I hope this helps!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Ngovkim Hing
July 16, 2019
Cook pot not working( big one) how can i order the right one the model number j b004s p7ss.
For model number J B004S P7SS
Hello Ngovkim, thank you for writing. This 9" Dual Radiant Element is the replacement you are looking for on your model. To place an order, please feel free to contact customer service by phone or you may do so online. Thank you.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Phil
November 30, 2019
I need to replace the front right dual burner. How do I remove the cook top to access the burner?
For model number JSP42DN2WW
Hi Phil, please watch our video here: https://www.youtube.com/watch?v=_kPOgh3lX_Q. Thank you for your question and good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Matt
December 27, 2019
I ordered a 9 inch burner but got a dual radial 9 burner but it seems to be to big. The old one is not a dual burner.
For model number JS630SF2SS
Hi Matt, this part PS2321567 is the right replacement part according to the manufacturing. I would make sure you ordered the right part number. Thank you for your question and good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Paul
March 2, 2020
Is the above part number the correct GE profile 30" downdraft electric cook top part number?
For model number JP989T05WW
Hello Paul, thank you for your question. I believe the model number is JP989T D 5WW. We were unable to find the model number you have provided. For the JP989T D 5WW model the front right element is PartSelect Number PS1154945 and the front left element and bridge (element that bridges the front left and back left burners is PartSelect Number PS955015. I hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Grady
June 17, 2019
The dual burner works only on the outer ring. I am not sure how to access the switch to test it as the videos I find all show this for switches mounted on a panel at the rear and this model has the switches on the front above the oven door. The next question is how to access the burner on this model.
For model number JSP46SP2SS
Hi Grady,
Thank you for your question. Before beginning, make sure the circuit breaker is off. You will need to remove the cooktop from the counter. To do this you will need to go underneath and see what kind of brackets are holding it in place. The brackets will vary depending on the make and model and type of countertop is it laying on. These brackets will need to be removed. Here is some information that a customer has left as to how they removed/installed the switch that may be helpful to you as well, "Turned off power to counter top range and pulled-up from counter. Set range on counter and removed 16 screws from around the housing allowing me to pull-up and remove range top. Used socket to remove 4 screws holding control switch bracket in place and 2 screws holding bad switch in place. Disconnect wires from bad switch and reconnected to new switch. Placed and screwed switch bracket back in place. Before placing range top back I turned power back on to to test burner operation. Burner and switch operated correctly and I completed screwing range top back in place, setting back down into counter top. Done" Also, here is a link to a video that may help. It is not the same appliance but same basic steps for the switch. Hope this helps! https://www.youtube.com/watch?v=7hoJqv_pQvg. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Hyunjun Ko
June 20, 2019
My range surface element (left front one, 9 inch i think, second largest one) doesn't heat up and when i looked inside the switch was burnt. I replaced the infinite switch but it still doesn't heat up and i am suspecting that it has a coil (radiant element) issue. Exact problem is that the element doesn't heat up and also the heat indicator (whether the element is hot or not it shows) always says that the broken element is hot even when it is not on. Would this part help fixing it?
For model number JCS630SF1SS
Hello Hyunjun, thank you for writing. Yes, this is the replacement for your model and may fix the problem. The correct Infinite Switch for it is part PS1481076. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Emily
August 19, 2019
I was cooking the other night and all of a sudden the burner quit working. When i turn the knob to turn the burner on the stove indicates burner on hot cooktop but the burner doesnt come on. What is the issue?
For model number JB645CP1BB
Hello Emily, thank you for inquiring. You will want to replace either this 9" Dual Radiant Element part number PS2321567 for your model if it is the burner not working correctly, or the 9" Surface Burner Switch part number PS1765835. I hope this helps and good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Steve
June 12, 2023
Front left Dual Burner, does not heat. Hot surface indicator remain on. Elements in the housing measure 34 & 40 ohms. The control switch passes power to the element side mounted thermostat. The thermostat does not pass voltage to the elements, as the other burners in comparison. - So I assume an element/thermostat set is in order, to repair?
For model number GE JB850ST1SS
Hi Steve, thank you for your question. Yes the part number you have provided is the correct part to fix your issue. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2321567
Manufacturer Part Number: WB30T10133
