Amana Cooktop Parts

Chrome Drip Bowl - 8 inch

★★★★★

★★★★★

17 Reviews

This manufacturer-certified drip bowl is also known as a drip pan, and it is designed for use with cooktops and ranges. It sits below 8-inch burner elements and catches drips and spills from the cookware on the burner. The diameter of the drip bowl is approximately 10 inches. This replacement might appear slightly different, but it will fit your appliance. You will need no tools to complete this repair. Simply remove the burner element, remove the old bowl, line up the hole on the new bowl with the terminal block and drop it into place. Make sure the bowl is flat before reinstalling the element. While you have the element out you should inspect the terminals for corrosion, damage, or discolouration. If you notice any of those things you should also replace the element and terminal block. You will need to replace your drip bowl if it is lost, damaged, or can no longer be cleaned. This replacement part is sold individually. To extend the life of your new drip bowl we recommend you clean it regularly with soap and water. We recommend only using the recommended drip bowl for your appliance; generic versions will not fit properly which could affect the performance of your elements and cause long-term damage.

6 Inch Drip Bowl - Black

★★★★★

★★★★★

1 Review

Sold individually.

8 Inch Drip Bowl - Black

★★★★★

★★★★★

2 Reviews

This black porcelain drip bowl with a hole in the bottom is intended for use with some electric ranges and cooktops.

Surface Burner Plug-In Block Kit

★★★★★

★★★★★

3 Reviews

This newer-style terminal block kit includes two metal brackets, two pre-crimped wires with terminals, two ceramic wire nuts, a heat shrinking tube, and a mounting screw.

Drip Bowl Kit - Light Gray

★★★★★

★★★★★

4 Reviews

This is a kit of 4 drip bowls - Two 6" and two 8". All pans have holes in the bottom and they are light gray in color.

Drip Bowl - 6 Inch

★★★★★

★★★★★

30 Reviews

This drip bowl is used for electric cooktops and ranges, it is designed to sit under a 6-inch surface burner. It catches the drips and spills coming from the cookware on the surface burner. This drip bowl is chrome, and it has a diameter of 8 inches. You need to remove the burner element to replace this part. Line the hole up with the element terminal blocks, and ensure the new bowl is flush with the surface of the cooktop before replacing the burner element. Drip bowls need to be replaced when they are lost, damaged, or you are no longer able to clean them adequately. This replacement part is sold individually.

Drip Bowl - 6 Inch

★★★★★

★★★★★

5 Reviews

This part has been substituted by the manufacturer and has a hole in the center. It no longer has a solid bottom.

Surface Ribbon Element with Limiter - 8"

★★★★★

★★★★★

1 Review

This is a 2000 watt 240 volt surface element.

Radiant Surface Burner Element 1500W

★★★★★

★★★★★

1 Review

This surface element is made for under glass set-ups and supplies the heat to a cooking area on top of the range. It has an outside diameter of approximately 7 inches (1500 watts), and is a genuine OEM part sourced directly from the manufacturer. Before you replace your faulty element, make sure the element is cool, and the power is disconnected from your range.

Surface Burner Element - 8 Inch

★★★★★

★★★★★

2 Reviews

This large surface burner is 2100W.