ACC3660AS (PACC3660AS0) Amana Cooktop - Overview

Diagrams for ACC3660AS

See every part. Know exactly what you need.

Parts for the ACC3660AS

$61.17

Spark Ignition Electrode

★★★★★

(2)

Part #WPY0316773

This spark ignition electrode is just over an inch in length. It comes with a mounting bracket and is used for some gas ranges and ovens.

Double Burner Bowl

★★★★★

(2)

Part #WP315600B

This black double burner bowl is eighteen inches long and nine and a half inches wide.

Surface Burner Head

Part #WP7504P109-60

Sold individually.

Variable Fan Speed Control

Part #Y0316913

$11.19

Screw

Part #WPY04100059

Burner Cap - 12/13K

Part #WP31782701MB

Burner Cap - Matte Black

Part #31782601MB

The size of this burner cap is actually 2.5" to 2.75 inches in diameter.

$188.47

Top Burner with Electrode - Medium - 9k

Part #WPY0315768

$9.83

Bolt - m3x6

Part #WP23001134

This electrode mounting screw is well under an inch long. It is made entirely of metal and has a Philips head.

$229.32

Spark Module

Part #WP31962701

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

TERM-RECP

Part #Y0042123

$9.88

Valve Screw

Part #W10491986

Part might differ in appearance, but functions same as original. Sold individually.

Common Symptoms of the ACC3660AS

How this model fails, and the parts that fix it.

Will Not Start

Fixed by
these parts

Show All

Gas igniter glows, but will not light

Fixed by
these parts

Show All

Element will not heat

Fixed by
these parts

Show All

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Broken Electrode, no spark

52 of 62 people found this instruction helpful.

HUY from ALISO VIEJO, CA
Easy
Less than 15 mins
Pliers, Screw drivers

Remove 2 screws holding the top burner. Remove 1 screw holding the electrode. Remove electrode from wiring using plier. Install new electrode and top burner

Was this helpful?

Burner would not ignite when control in "light" position

22 of 29 people found this instruction helpful.

Michael from Friendswood, TX
Really Easy
Less than 15 mins
Screw drivers

Remove the two screws from the burner assembly (on top of the burner). Lift burner assembly from the cook top. Disconnect the electrode wire from the electrode. Remove the screw holding the electrode to the burner assembly (on bottom of burner). Install the new electrode and attach the electrode to the burner assembly. Attach the elec ... Read more

Read less

Was this helpful?

Two of the four burners would not ignite when lighting the stove.

18 of 22 people found this instruction helpful.

Dave from Livonia, MI
A Bit Difficult
1- 2 hours
Screw drivers

I thought the problem was with the ignitors/burners since they appeared to be worn. As it turned out, I needed the spark ignitor, which is a "brain box" located under the range cover. It connects all of the ignitor/burners and sends current to the ignitors to give it the "spark" to ignite the gas. It was really easy to replace.

Was this helpful?