OEM stands for Original Equipment Manufacturer. This means that the company who made your appliance is also supplying the replacement part.
Features
OEM
Generic
Genuine brand name
Guaranteed to fit
Superior Quality
Long term value
About this fix
Common problems and models this part fixes.
Easy
15 - 30 mins
Rated by verified customers
What this part fixes:
Ice maker won’t dispense ice
Ice maker not making ice
Noisy
Ice maker dispenses too little ice
Clicking sound
Works with the following products:
Refrigerator
Part# WR17X11459 replaces these:
AP3203248, 1057467, WR17X11459
Customer Reviews
Real ratings from other people who bought this part.
Average Rating:
★★★★★
★★★★★
5 Reviews
4.8
Out of 5
5 Stars
4
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
Search reviews left by others. DIY doesn't mean you have to do it alone. Use simple keywords like "fit", "broken", "easy", or "quality" to find reviews that match!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Rick W - January 25, 2019
Verified Purchase
Part Select excellent service fast delivery.
Ice maker works perfectly again. Easy to install ordered a spare.
★★★★★
★★★★★
Tim E - May 16, 2019
Verified Purchase
Easy repair
The part was easy to install, however I have other problems which require more parts
★★★★★
★★★★★
Margo P - August 24, 2023
Verified Purchase
Easy repair
The part arrived quickly and fit perfectly. It was simple to replace by watching a video. No problems.
★★★★★
★★★★★
Alain J - August 8, 2019
Verified Purchase
Rapid delivery !
Excellent purchase Workopolis perfercly
★★★★★
★★★★★
John C - April 2, 2019
Verified Purchase
Easy repair
I think this part should be made a lot sturdier. It is soft plastic and I can see it breaking again if ice backs up. The part is great had a little trouble getting augers out during repair. When the dispenser broke the auger backed off on the screw ( which is reverse thread). Which went into the plastic so it got stuck and lodged. A lot of gentle prying so I didn’t break the ice container got it out.
Prev
1
Next
Repair Tips
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
Easy
15 - 30 mins
Average repair rating from 29 real customers like you
Sort by:
Prev
1
2
3
Next
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sorry, we couldn't find any existing installation instruction that matched.
Ice Maker stopped dispensing ice through Ice Maker Dispensor.
647 of 732 peoplefound this instruction helpful.
Fred from River Ridge, LA
Easy
Less than 15 mins
After taking Ice Maker's ice collection container out, I noticed that the plastic cup drive was broken. I did a websearch for repair and replacement parts for our GE refrigerator. I found PartSelect website easy to navigate and find the replacement part necessary...and placed an order.
Once I received the shipment, I placed the
... Read more Cup Drive into position and used the flat edge of a knife to allow the Cup Drive to slide into the tight-fitting position necessary. After positioning into place, I placed the ice collection bin back into the freezer...turned the ice-maker back on...and waited for ice to be made. A day later, the ice maker had produced enough ice to test the ice maker's dispensing mechinism. The cup drive worked perfectly...and ice began to be dispensed. The dispensor has been working ever since.
I also replace the ice and water filter...another very easy task...of unscrewing the old and replacing with the new filter. After replacing the filter, I let the water dispensor run for 2 minutes to flush all air out the system. The water dispensor work perfectly.
This was the second time in two years I had to replace a broken drive cup. Remove four screws that fasten the ice bin to the frame. Remove one screw that fastens the cube-crushed ice lever to the bin. Do not remove the lever and spring from the bin. Move the lever to expose the connection to the cube-ice shield. Push the lever to com
... Read morepress the spring and remove the lever end from the cube-ice shield. The cube-crushed ice assembly is a press fit and should pry away from the bin. Two issues. 1- The threaded plastic bearing on the dispenser end had turned all the way in causing the end of the dispenser screw shaft to bore through the housing and trap the shaft onto the housing. I had to insert a pry between the housing and the dispenser mechanism to release the shaft from the hole it had bored. Then the dispenser mechanism separated easily and the drive cup replacement was simple. 2- Why was the drive cup breaking? When I used "quick ice" the freezing tray over-filled causing the cubes to freeze together at the top. The bonded cubes then got trapped in the dispenser screw and jammed a lump of ice into the end of the bin causing enough pressure on the plastic drive cup to break it. Lesson - Check the ice bin frequently for frozen lumps of ice. If present, empty the bin and make sure only properly formed cubes are present. Run the dispenser frequently to prevent ice cubes from freezing together.
Read less
Was this helpful?
Thank you for voting!
ice dispenser would not turn
61 of 83 peoplefound this instruction helpful.
Bill from Corona Del Mar, CA
Easy
Less than 15 mins
Screw drivers
It appeared that the helix lock wore out first, then the cutter teeth dug into the side of the plastic housing. Then the cup drive broke in half from the helix being jammed. Removed the ice bin from the refrigerator. removed 4 screws around the edge of the bin. Pry open clips that hold the auger assembly in place. Remove the clip fro
... Read morem the end of the auger. Pry old plate helix lock from holder. Pull out helix auger removing cutters and keeping everything in order. Replace old plate helix lock with new one. Replace cutters in order and tighten nut and install clip. Put new cup drive on end of helix. Snap assembly back together. Replace screws.
I took the four screws out of the ice basket and removed the plastic cup pieces. I then lifted the scress shaft up and put the new cup in. You have pull up very hard on the screw shaft and use two thin flat metal puddy knives to disingage the two plactic stays on each side of the shaft holder. The plactic housing around the screw shaft
... Read moredid not brake, however. I then put the screw shaft and the cup drive in place quite easily. Works fine.
Read less
Was this helpful?
Thank you for voting!
Drive Cup Broke and Helix Cracked
32 of 40 peoplefound this instruction helpful.
Michael from Surprise, AZ
Easy
15 - 30 mins
Screw drivers, Wrench (Adjustable)
Pulled Ice bin out and emptied ice out of bin. Removed 4 screws holding bin to frame and seperate bin from frame. Takeoff or loosen dispenser arm that has 1 screw holding it. On the sides in the front I pushed tabs in and pulled up on front auger/chip assembly area using two screwdrivers to hold tabs in. Pulling assembly up took a little
... Read morepressure by hiting down on main ice bin to disengage and watching to see that tabs were also disengaged at same time. After that it was take c-clip off loosen nut and disassemble. You might want to draw a diagram as to how everything was in place or take a picture with your camera phone to make it alot easier for you to remember how everything went. Remove and Replace parts and assemble in reverse.Once you start to do it you'll see how it goes so easy, hopefully I didn't miss to many steps but if I did You'll see what needs to be done to go to the next step.
ice tray slides right out. 4 philips to remove the bottom, 1 to remove the arm that controls the mode (regular vs. crushed). It just slips into a hole on a wheel at the dispenser end - the same end has two tabs you push in and slide up/out the coil screw that rotates and drives ice out. Once one end is out, it slips out, replace the cu
... Read morep, reverse. This is the 2nd time I've ordered from PartsSelect, both times the part came in just a couple of days, easy navigation on the site, plenty of security validation, etc.
Read less
Was this helpful?
Thank you for voting!
Water line to Dispenser Broke& Ice Maker Clip
18 of 33 peoplefound this instruction helpful.
John from Redondo Beach, CA
Really Easy
30 - 60 mins
Nutdriver
Super simple... removed pnl in back connected the splice, added the new house, replaced the clip in the Ice Maker Tray....
Just had to pull ice maker drawer out and replace the drive cup which was very simple. Light bulb on door dispenser was kind of hard to get back in cause it is such a small space to screw the bulb in.
followed instructions already posted on your website, but had a very difficult time getting the dispensing side of the auger assembly to slide out, even after I disengaged the plastic tabs. There is no easy way or place to grab the assembly to pull it out. Finally turned the unit upside down and pounded on the edges of the assembly with
... Read more a wood block and a small hammer. Once the part started coming out a couple of inches, I flipped over the ice bin and was able to pull it out the rest of the way, once I had something to grab on to. After the auger assembly was out the cup replacement was easy per posted instructions and the unit snapped back together easily.
Read less
Was this helpful?
Thank you for voting!
the drive cup on the auger had broken in half, no ice dispensed
10 of 17 peoplefound this instruction helpful.
Arvind from Port Saint Lucie, FL
Really Easy
Less than 15 mins
Screw drivers
Removed four screws holding the bin ontomain body. lifted the auger enough to slip in the new cup and placed the bin into the main body and installed the four screws back. Put the bin back into the Freezer. it work just fine
Was this helpful?
Thank you for voting!
Prev
1
2
3
Next
DIY Questions and Expert Answers
14 questions answered by our Repair Experts.
Ask our experts a question about this part and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Liliana - For model number wr17x11459
October 6, 2017
Do you have any video
Hi Liliana. Thank you for the question. Please see the link below for the video. Hope this helps!
https://www.youtube.com/watch?v=5MY_AShPoUg
21 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Tony - For model number Da97-06978g
November 3, 2017
Will this fit a Samsung da97 06978g
Hi Tony,
Thank you for your inquiry. The drive cup is a GE part and will not fit your appliance. For information on the correct part, we would need your model number. I hope this helps. Thank you and have a great day!
2 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Grant - For model number PSC23MSWCSS
May 6, 2018
Will this auger cup fit my GE refrig?
Hello Grant, Thank you for your inquiry. Yes, we do show that this ice auger drive cup will fit the model number you provided. Hope this helps!
2 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
David Hershan - For model number Zfsb23dxass
June 24, 2019
How do you replace ice dispensing cup
Hello David, thank you for your question. Here is a video that might help! https://www.youtube.com/watch?v=5MY_AShPoUg
2 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Bob - For model number GSF25XGRBWW
November 4, 2019
Hello, my refrig keeps breaking the ice despencing drive cup, model number ps964134. Can you please advice a possible cause for this to keep happening. It has broken two so far, the one that came with the frig and a replacement part i ordered from you. Thanks.
Good Day Bob. Thank you for your question in regards to your unit (Model Number GSF25XGRBWW). Based on our research, the reason that this may be happening is that the auger is out of alignment and may need to be reset. Hope this helps. Best Regards.
2 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Manuel
September 25, 2019
How to install
Hi Manuel, Thank you for the question. Please see the link below for the video. Hope this helps! https://www.youtube.com/watch?v=5MY_AShPoUg. Good luck with your repair.
2 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Nicole - For model number GFSS6KKYESS
July 15, 2021
Will this fit my ice maker?
Hello Nicole, Thank you for the question. The cup for this model is not sold separate from the Ice Bucket and Auger Assembly. We hope this helps!
Auger makes a grinding/thumping noise but does not move the ice forward. Will replacing the motor fix it?
Hello Deborah, Thank you for your inquiry. You can test the auger motor with a multimeter to see if it is causing the issue. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
WE NEED THE WATER/ICE DISPENSER GRILL:
CAVE:1 REV:2 GRILL : 200D7803P002
DO YOU HAVE IT?
Hi David, thank you for reaching out. The dispenser grille, part number PS1483313, fits your model. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
When we try and get ice, it makes a loud clunking noise like the auger comes out of place. Is this the part we need to make it stop making a noise and have ice again?
Hi Trina, thank you for your question. It could be this part however I would suggest pulling out the ice bin and taking a look at the parts to see if anything is broken or not. Once you do an inspection of the parts you should be able to see if there is anything broken in there. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Prev
1
2
Next
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
My Orders
