Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Simon R - March 17, 2023
Verified Purchase
Easy peasy- worked great!
Worked out great! Thank you!
★★★★★
★★★★★
Christopher T - January 20, 2023
Verified Purchase
effecient service and delivery
installed , working , thanks
★★★★★
★★★★★
Rosalie B - November 4, 2021
Verified Purchase
Great service....speedy.
The part came fast and was exactly right. Unfortunately it was not the problem after all. Have to buy a new dishwasher.
★★★★★
★★★★★
Maverick H - April 28, 2021
Verified Purchase
No pic
No picture of item. Can’t tell what it is
★★★★★
★★★★★
Larry M - April 15, 2019
Verified Purchase
FOUND THE RIGHT PART!
Delivery was prompt and part was exactly what I needed. Problem solved!
★★★★★
★★★★★
Robert V - October 17, 2018
Verified Purchase
I am not sure how to rate this, service great but sending the wrong paart not so.
I was very happy with the service, however, it was the wrong part. I finally got a hold of someone at Bosch who spent a fair bit of time and finally confirmed there is no replacement lid for the dispenser and you can only get the complete dispenser, which I bought. You were the second company that send me the wrong part, a part that Bosch says is not sold separately.
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Steve
June 13, 2019
I’m having an intermittent draining problem with my dishwasher (e.25). The drain pump and impeller are clear and the motor spins freely. If i play with this drain cover it appears i can get the unit to drain. It also appears that if i remove this cover my unit will not drain. Is there a sensor that checks for this cover being in place? Could my issue be that sensor? Is this the turbidity sensor? Or is the all co-incidence and my controller unit is to blame. Draining fails often but i can always play with these parts in the sump to get it working flawlessly for a while. Frustrating. Thanks for any advice you have.
For model number Shx4atf5uc/14 Bosch dishwasher
Hello Steve, thank you for inquiring. You will want to consider the Drain Pump itself, part PS8727352, this Lid part PS8727344, or possibly the Drain Hose part PS8732952. There doesn't appear to be a sensor involved. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ray
August 26, 2019
The user manual calls what you call a "lid" a "cover". I think that i ordered it correctly. I ordered the lid. It is very difficult to re-install and the dishwasher will not run unless it is properly installed. Is the lid the same as the cover that covers the drain pump impellers?
For model number SHE65T55US/09
Hi Ray, thank you for your question. This part is actually pretty easy to remove. It is locked into place by a locking tab. All you have to do is take a flat head screw driver and pry it at the short tail that comes up the side of the filter housing. Once you have unclipped it from the locking tab all you have to do is lift the part out of place. This part slips down into your filter housing area there. So once you get it into place you would just push it into place and into the tab. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
