This is a replacement dishrack roller or wheel for your dishwasher. It is made of gray plastic, measures a little over an inch in diameter, and is sold individually. This roller is designed for the lo...
Includes 6 screws. You will need a size T20 Torx screwdriver.
$12.50
In Stock
Questions And Answers for 63013023010
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Nash
September 5, 2022
Hello
I have a dishwasher kenmore model 63013023010 and the probleme is the dishwasher when i starte it after a while it work but the machine inside it dosent work very well and after a while they stop for no reason .after i cleaned the water pomp and its the same thing can u help me pls
For model number 63013023010
Hello Nash, Thank you for your inquiry. We have researched the model number you have provided and we would recommend checking the following parts to fix your issue: the door lock assembly, the sensor, the diverter motor, the aqua stop assembly, the water distributer, and the circulation pump. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. We hope this helps and if you need help placing an order for a part, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
This is a piece of cake. No tools are actually needed. Grasp one end of the old seal and gently pull it out of the groove in which is fits. Take the new seal, and paying attention to which way around it fits (there is a right and wrong way!) start at either end. Leave an inch or so beyond the groove to rest on the bottom of the dishwasher, and press the seal in place in the groove. You should have an inch or so left at the far end. Go back and go all along the seal and make sure it is pressed evenly and completely into the groove the full length.
