Order within the next 11 hrs and your part ships today!
Questions And Answers for 63013903011
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
February 16, 2023
what part /parts prevents the dishwasher door from fee falling at the hinge location?
For model number 63013903011
Hello David, thank you for your inquiry. The parts that keep the door from free-falling are the spring, part number PS12718837, and the holder, part number PS8726595. Good luck with this repair!
Can the door cable kit for 6301390 fit this older model?
For model number 63013903011
Hi Bruce, thank you for contacting us. According to our research, your model does not have a door cable. The door cable of other 6301390 models will not fit your model. We hope this information helps!
Was this helpful?
Thank you for voting!
Bob
October 13, 2022
I get error 24 a few minutes into cycle, but I have checked drain system by pouring a pail of water into machine and it emptied it with no issue. I once thought it might be the float switch because I moved it up and down from under machine while it was starting and it filled with water and ran through completely without any problems. I replaced float switch (00611665) but have same E24 code about 2 minutes into starting machine. Any advice is welcome, thank you
For model number 63013903011
Hello Bob, thank you for contacting us. Given that the drain pipes, pump, filter, and hoses are not blocked or kinked and the draining process is working well, the issue might be related to the control board, part number PS8735815. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
The upper spray arm came off. How do I fasten it back in place?
For model number 63013903011
Hi Steve, thank you for reaching out. To fasten the spray arm back, place the spray arm holder with the central basket wire and press forward to lock the tabs. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
We let this go for a shameful amount of time before I decided I could probably fix it. The roller broke so you could only pull it out about halfway or it would come off the track. I looked up the part, and bought it. Actually bought two in case it happened again. When I arrived I looked at how it was put together on the other side and then just basically pushed it onto the rod and it was fixed. I am ashamed it took so long to do it. Never be afraid to try it yourself. It was a total of $10 shipped to fix it.
disconnected inlet hose and water line from sink, removed old inlet valve and installed new valve and reconnected inlet hose and water line from sink - checked for leaks.
This was the third time I replaced a fill valve in a Bosch diswasher, twice in this unit and once in a previous unit. I read the installation hints on your web site and want to add the following suggestion.
The notes on your web site say you can remove the valve from behind the toe face and pull it out to reach the hose and plug. I found that the Bosch designers called for both the hose and wire to on the short side. I found that pulling the dishwasher forward 6" to 9" allows you to access these connections from the side at least to hold them while making the connection. I hope this helps. Thank you, Bill