VALVE-NON RETURN
Fits your DWHD640JFP!
$24.71
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your DWHD640JFP!
PartSelect Number
PS8727342
Manufacturer Part Number
00611320
Manufactured by
Bosch
Troubleshooting
This part fixes the following symptoms:
Not draining
This part works with the following products:
Dishwasher.
This part works with the following products:
Bosch, Gaggenau, Thermador, Kenmore.
Part# 00611320 replaces these:
AP4327582, 611320
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
dishwasher not emptying tub, dirty dishes when the dishwasher said the cycle was done
easy repair, but the check valve wasn't the problem, it was the float switch that isn't on the tech sheet in the dishwasher or mentioned as a possible culprit anywhere I could find on the internet
Other Parts Used:
-
daniel from AUBURN, IN
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Randy
December 1, 2017
I tried running my dishwasher several times and after a minute or two it stopped and gave an e24 code and no water had entered. I also unplugged it several times with the same result. Your thoughts? Thank you
For model number 63013902010
Hi Randy, Thank you for the question.When you start the dishwasher the very first thing it does is go into drain to make sure any left over water from the last load is gone. The E24 error indicates no drain flow possible. This means that the drain pump is running but unable to remove the water, or drain blockage. I suggest checking for any blockages in the drain hose and drain pump.If no blockage is found, check for restrictions in the house drain system, such as the garbage disposer or pea trap. If everything checks out good the drain pump may need to be replaced,PartSelect Number PS8727352. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Michael
March 26, 2024
My dishwasher makes a high pitch whine when it starts filling with water, is it the water inlet valve, I have read that it could be the rubber diaphragm
For model number SHS843AF5N
Hi Michael, thank you for reaching out to PartSelect. This means the water inlet valve, part number PS16746057, on the dishwasher is faulty and will need to be replaced. Good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Prasad
May 31, 2023
Please advise me, float switch unit and water inlet unit for above Bosch dishwasher
For model number SHE4AP02UC/09
Hello Prasad, thank you for reaching out. The float switch, part number PS8727422, and the water inlet valve, part number PS8728724, are compatible with your model. We hope this is what you were looking for!
Was this helpful?
Thank you for voting!
Related Parts:
Sam
July 6, 2023
water drains at end of cycle, but later there is water in the bottom. The water will drain at start of new cycle, drains at end of new cycle, but later water in bottom again. Water is drained through garbage disposal. Is there a one way valve stuck open or something that lets water back in when garbage disposal being used?
For model number SHE3ARF6UC/12
Hello Sam, thank you for reaching out. Our research shows that when the drain is clogged, pressure in the pipe can cause water to back up into the dishwasher. We would recommend checking the drain hose, part number PS8732952, to fix the issue. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
Bill
January 17, 2024
Washer drains on start but cleans for a minute then states clean. If I let it drain at the start and then throw some water into the washer, it works perfectly fine. What might be the problem
For model number SHX4AP05UC-05
Hello Bill, thank you for contacting us. We believe your dishwasher is having this problem because of the faulty control board. We would suggest replacing the control board, part number PS8733707, to fix the issue. It manages the functions of the dishwasher, such as washing, draining and drying. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS8727342
Manufacturer Part Number: 00611320
Manufacturer Part Number: 00611320
Brand
Model Number
Description