Drive Motor with Pulley
Fits your CTW100FW0 Washer!
$461.80
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your CTW100FW0 Washer!
PartSelect Number
PS815482
Manufacturer Part Number
134156400
Manufactured by
Frigidaire
Product Description
Drive Motor with Pulley Specifications
This motor has 3/4 hp and 1 speed.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Washer Dryer Combo, Washer.
This part works with the following products:
Frigidaire, Westinghouse, Crosley, Gibson.
Part# 134156400 replaces these:
AP3219508, 958670, 131761200, 131761300, 134182300
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jerold
April 19, 2018
This unit runs near out of balance no matter if you run very light loads, heavy loads or just a tub of water with one t-shirt in it.Could the motor shaft be bent? the belt shakes and bounces a lot. Replaced the belt and that keeps the tensioner from hitting the mount. Thank you.
For model number fex831fs0
Hi Jerold, Thank you for the question. I suggest checking the Snubber Ring, PartSelect Number: PS473378 for wear.The snubber ring on your washing machine mounts at the base, under the support. If you notice that your washing machine is vibrating, shaking, or moving during the wash cycle, you may need to replace the snubber ring. Because the snubber ring is located under the tub of the washing machine, you will need to remove the front panel to access it. To protect your hands when removing the snubber ring, consider using a bent coat hanger or a sturdy wire with a hook to pull the old snubber ring free. Be sure to disconnect the power and water sources for the washing machine before you begin this repair. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS815482
Manufacturer Part Number: 134156400
Manufacturer Part Number: 134156400
Brand
Model Number
Description