Troubleshooting
This part works with the following products:
Dryer.
This part works with the following products:
Frigidaire, Electrolux, Crosley, Kenmore.
Part# 134711401 replaces these:
134711400, 7134711400
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Joanie D - January 15, 2024
Verified Purchase
Perfect for my Dyer
my dryer had suddenly stopped working without notice and it was the thermostat that had burned out, no current was passing through there so it was this part thank you very much
Amy Biligjargal E - November 12, 2018
Verified Purchase
Easy peasy
Easy fix with a youtube video and some time. Part fit perfect.
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mark
August 24, 2017
Error code e66, i believe is the exhaust thermal limiter, mfg part number 134711400
For model number eied50Liw0
Hi Mark,
Thank you for the question. That E66 error code means the exhaust thermal limiter is tripped or that you have a wiring failure in that circuit. That fuse is on the outlet exhaust tube. You can check the continuity of the thermal limiter fuse using a volt/ohm meter.
Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Tom
April 15, 2018
Gas dryer no heat cant find the the limiter or fuse found the gas valve coil gas doesnt come on
For model number FFLG1011MW3
Hello Tom, thank you for your question. The limiter is located on the back of the dryer, on the side of the heater pan. It is item # 8 on the Upper cabinet/drum heater diagram. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jorge
January 23, 2019
Gas Kenmore dryer, starts and shuts on and off,and off all light cut out on panel.
For model number 417.91122311
Hello Jorge, thank you for your question. We would recommend testing the Part Number: 134587700 Control Thermistor and the two thermal fuses PartSelect Number: PS7783961 and PartSelect Number: PS4704883. If these are tested and are not bad, you will want to check the burner parts which would be the igniter, coils, flame sensor and valve. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Dan
April 9, 2019
Hi, I have a Frigidaire affinity gas dryer that's not drying the clothes. I cleaned the duct and vacuumed all around the bottom of the dryer gently. The motor runs, I can see the ignitor come on, the gas lights up, it burns for 10 20 seconds then it goes out and repeats. I checked the control thermistor it's reading about 50 k ohms. Can you help?
For model number FASG7074LWO
Hello Dan, thank you for inquiring. For this symptom you will want to replace either the 'M' Series Ignition Coil Kit part PS470049, the Flame Sensor part PS459818, or the Control Thermistor part PS1149368. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Travis
August 15, 2019
My dryer will start and then stop after 10 to 15 minutes. Has to cool down and then can start it again.
For model number 417.81122310
Hello Travis, thank you for contacting us. You will want to consider replacing either the High Limit Thermostat part number PS446428 or the Control Thermistor part number PS1149368 for your model to fix this. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Travis
August 20, 2019
So I replaced the hi limit thermostat and thermistor. And my dryer is still running hot and shutting off. I cleared all air ducts and lint trap. I have thermal fuse coming on Wednesday. Is there a cycling thermostat on here? Or is it another thermostat i am missing? At a loss here.
For model number 41781122310
Hello Travis, Thank you for the question. there is a second Hi Limit Thermostat, PartSelect Number PS8691862. I looked up the part and it is listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Orville
October 29, 2019
Replaced thermal fuse ,no continuity, worked briefly then door open warning ,and thermal fuse again
For model number FASE7073LA0
Hello Orville, Thank you for the question. I suggest replacing the Thermister PartSelect Number PS1149368 at the same time as the fuse. If you are also getting the door open error you may also need to test the Door Switch PartSelect Number PS2367765. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Chris
October 5, 2023
Need to replace the duct thermal limiter. Number written on the part shows 1347114 but all replacement parts I find show 134711400 or 134711401. Is there a difference between these two replacement part numbers?
For model number FASE7073LWO
Hi Chris, thank you for the question. The thermal fuse compatible with your model is part number PS4704883. There is no difference between the numbers you have provided. All these numbers are the alternative numbers for the same thermal fuse. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
James
March 6, 2024
Are you turn on my dryer? It runs for a few seconds, and then shuts off
For model number EFME417SIW0
Hello James, thank you for reaching out. Based on the description that you have provided, we would recommend replacing the high limit thermostat, part number PS8691862, to fix the issue. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Related Parts:
Charles
January 28, 2024
Dryer stops while drying and I have to allow it to cool down before restarting
For model number FAQG7001LW0
Hello Charles, thank you for reaching out. Based on the description that you have provided, we would recommend checking the vents for any blockage. If this is not the issue, we would suggest replacing the thermistor, part number PS1149368, to solve the problem. It attaches on the blower housing, and monitors and helps regulate the temperature inside the dryer. Glad to be of assistance!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- 2
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS4704883
Manufacturer Part Number: 134711401
Manufacturer Part Number: 134711401
Brand
Model Number
Description