Control Panel Assembly - Black
Fits your WMH31017AB3 Microwave!
$351.28
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your WMH31017AB3 Microwave!
PartSelect Number
PS3508054
Manufacturer Part Number
W10468661
Manufactured by
Whirlpool
Product Description
Control Panel Assembly - Black Specifications
Includes the membrane switch and the lens.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Microwave.
This part works with the following products:
Whirlpool.
Part# W10468661 replaces these:
AP5589918
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Daniel
December 1, 2023
How to remove the Control Panel?
For model number WMH31017AB-1
Hi Daniel, thank you for reaching out. To replace the touchpad and control panel assembly in your microwave oven, first unplug the power cord. Now use a phillips-head screwdriver to unthread the screws securing the grill. Pull the grill forward from the top to remove. Open the oven door and remove the mounting screw securing the control panel. Lift the control panel up to detach. Note the orientation of the wires connected to the control board, then depress the locking tabs, if necessary, to disconnect the wires. Free the hinge tab from the front panel and remove the screw and washer, securing the grounding wire. Release the ribbon connecter. Remove the two screws securing the main control board and housing to the control panel. Depress the retaining tabs and pull the housing out. Prepare the new touchpad and control panel assembly for installation by removing all the protective coverings. Now align the control board housing in the new panel and snap it into place. Thread the screws to secure. Connect the ribbon connecter. Secure the grounding wire with the screw and washer. Insert the hinge tab into the front panel and reconnect the remaining wires to the appropriate terminals on the board. Insert the control panel tabs into the front panel slots and push the panel down. Replace the mounting screw to secure. Realign the grill and snap it into place, then re-thread the screws to secure. With the repair completed, plug the power cord back in and your microwave oven should be ready for use. We hope that helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3508054
Manufacturer Part Number: W10468661
Manufacturer Part Number: W10468661
Brand
Model Number
Description