Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Russell W - February 11, 2019
Verified Purchase
Leaking water inlet valve : Repaired
The part arrived as described and it record time - Installation took @ 20 minutes - Works like new
★★★★★
★★★★★
OSCAR B - August 23, 2018
Verified Purchase
Excellent
Very good pricing. Arrived on time , exactly what it says will last (5 days approx). Great product
★★★★★
★★★★★
Ashley C - August 23, 2018
Verified Purchase
Correct Part, Easy Instructions
I work for a plumbing company and this part was easily found, it was the correct part, and came with install instructions for an easy repair.
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Matt
February 11, 2018
I need a part that may be f36 on the control panel diagram. It says it's f36 on the diagram but the diagram only has a 36. It is an expensive part, could i be refunded fully if it's not the correct part because there is no picture of the part, just a large diagram with letters that don't quite match
For model number 417.41122410
Hello Matt, thank you for your question. Item 36 on that diagram is the water valve for the unit. If you're needing to replace that part, you would order PS3490374. This is the water valve assembly for your specific model. If it is not correct, you are able to return it within 30 days for a full refund. Please see our return policy information at the following link: https://www.partselect.com/Thirty-Day-Returns.htm
I hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Evan
June 19, 2019
Cold water continuously enters washer during operation,at the end of cycle and when power is disconnected.
For model number BKFW4271MT
Hello Evan, thank you for writing. This sounds like you should consider replacing the Water Inlet Valve part PS3490374 for your model.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Fred
March 6, 2020
After I use my washer on the delicate cycle, the drum continues to fill with water over the next several hours. Usually, a couple of inches of water collects. This never happens on other cycles.
For model number FAFW4011LW0
Hi Fred, thank you for your question. The first part to test would be your water inlet valve. The valve can be tested with a multi meter and should be reading between 500 - 1500 ohms of resistance. If that part is fine then you may have an issue with your control board itself. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Dollie
April 14, 2023
How do I remove the water inlet valve assembly?
For model number 417.41122410
Hi Dollie, thank you for reaching out. Here are some general instructions that will help you remove the water inlet valve: First, unplug the washer and remove the top panel by removing the screws from behind. After removing the screws, slide back the top panel and lift it to remove it. Remove each of the wire harnesses. Remove the screw attached to the water inlet valve. Remove the grommet assembly with a flat screwdriver. Remove the vent tube assembly by turning it anticlockwise and taking it out. Now, unthread the second screw attached to the water inlet valve. Remove the water inlet valve by pushing it forward and taking it out. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3490374
Manufacturer Part Number: 134959340