Product Description
Inner Tub Filter Plug Kit Specifications
Kit contains 4 plugs - replaces the lint filter that goes under spin basket. The filter under the spin basket is no longer required. Replaces round filter assembly.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Marks left on clothes
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Whirlpool, Kenmore, KitchenAid, Roper.
Part# 285868 replaces these:
AP3094570, 897727, 20103871, 285250, 285251, 285868, 3361948, 3952746, 62941, 62948, 8522271
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Ken S - November 7, 2019
Verified Purchase
Brutally expensively for a piece of plastic.
Came in about 7 days. Like all the parts on here way to expensive.
Mark L - October 23, 2018
Verified Purchase
Fixing my washing machine
Easy to install and all is well Thanks
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 2.7 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The motor turned with loud noise ,but nothing else worked
I used "Emley's Cheap and Easy Repair" book to remove,install and reassemble the machine.
A lot of time was used to clean the filthy tub and basket.
While replacing the broken motor coupling I decided to replace some of the seals.
PartSelect got the ordered parts to me in a couple of days.
I wouldn't hesitate to do the job again.
A lot of time was used to clean the filthy tub and basket.
While replacing the broken motor coupling I decided to replace some of the seals.
PartSelect got the ordered parts to me in a couple of days.
I wouldn't hesitate to do the job again.
Other Parts Used:
-
Bob from East Palestine, OH
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
82 of 175 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Agitator broke & plug missing
Removed top of agitator and undid the bolt with 7/16ths extended socket wrench. Took out the full agitator. Three plugs had to be removed one was missing. They were in ruff shape. You have to push in the plugs until they snap in. Put in the new agitator and put the bolt back in.
Other Parts Used:
-
Nancy from INDEPENDENCE, MO
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers, Socket set
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rocky
October 8, 2017
How to install this part. Washer started making high pitch noise during agitation. Pulled clothes out and found this part inside the washer
For model number 285868
Hi Rocky,
Thank you for your question. To get to these parts you have to remove your agitator. Once you remove your agitator you will see 4 holes. If you have two holes that are bigger than the other two, that is the only place where you will replace these parts. The smaller holes do not have the filters. Good luck with your repair.
7 people found this helpful.
Was this helpful?
Thank you for voting!
Lindsey
September 26, 2019
Lint is coming out of the hose and plugging my sink drain that it drains into. My manual says that there is a built in self cleaning lint filter but doesn't say how to get to it to clean it. I pulled out the agitator but still can't get to it. Is the problem the lint trap, and if so how do i locate it to clean it out?
For model number LSR8233JQ0
Good Day Lindsey. Thank you for your question in regards to your unit (Model Number LSR8233JQ0). Unfortunately we were not able to locate information on this for you and would recommend reaching out to the the manufacturer for further assistance. They can be reached at by phone by calling 866-698-2538. Best Regards.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Gerry
March 24, 2023
What is the diameter of the holes that these filters fit into? Can they be used to addition to (instead of removing) the large circular lint trap under the tub? Thank you
For model number KAWS777EQO
Hi Gerry,
Thank you for your question. The diameter of the hole these filter plugs are inserted into would be approximately 1 inch. Your washer may use all 4 plugs or just 2 of them. These plugs and the filter help to keep your washer functioning properly. If you would like to place an order for them, please call our customer service line and anyone will be happy to assist you. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
David
October 14, 2017
The tub is packed with lint plunging the holes on the upper half causing bad odor. I will replace the filter plugs but how do i get the lint out? I have been trying to pull it out through the holes and that is taking a long time.
For model number LSR6132EQ1
Hi David,
Thank you for your question. Unfortunately you would just have to clean them out any way that you can. You could try with a vacuum. Make sure that your appliance is unplugged before doing any in depth cleaning with it. Just in case. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Michelle
August 28, 2019
Lint and marks on clothes, could it be the lint filter that needs to be cleaned?
For model number LXR7144EQ1
Hi Michelle,
Thank you for your question. If you have lint left on your clothes, check the ling trap and clean any excess lint from the trap and the exhaust hose. If there are marks left on the clothes, there are some parts that you will need to check to see which one is causing the issue. Here is a link from our website that you may reference on what parts to check, https://www.partselect.com/AdvancedModelSymptoms.aspx?ModelNum=LXR7144EQ1&mfgModelNum=&fkMfgID=3&ModelMasterID=64090&PID=45. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Tom
November 28, 2018
How do i remove agitator . Cant budge it
For model number LSR52322LQO
Hello Tom, thank you for your question. Sometimes, if you use a rope or a ratchet strap and slide it under the agitator it can help give you some leverage for pulling up on the agitator. I hope this helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS334684
Manufacturer Part Number: 285868
Manufacturer Part Number: 285868
Brand
Model Number
Description
Kenmore
10682872600
Washer
- Kenmore Washing Machine Model 106.82872600 (10682872600, 106 82872600) Parts
Kenmore
1101050299
Washer
- Kenmore Washing Machine Model 110.1050299 (1101050299, 110 1050299) Parts