Product Description
Spin Pinion Seal Specifications
This seal is for the top of basket drive tube shaft.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Whirlpool, Kenmore, KitchenAid, Roper.
Part# WP356427 replaces these:
AP6008717, 356427, 62683, 62684
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Ken S - January 31, 2020
Verified Purchase
Corporate greed
Had three extra seals in two separate orders left over after spending seveal hundred dollars on parts and they are in original like new unopened packages and was told too bad. They won’t take them back after 30 days. Pathetic after paying outrageous prices for small rubber seals. Terrible terrible service.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 2.4 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The motor turned with loud noise ,but nothing else worked
I used "Emley's Cheap and Easy Repair" book to remove,install and reassemble the machine.
A lot of time was used to clean the filthy tub and basket.
While replacing the broken motor coupling I decided to replace some of the seals.
PartSelect got the ordered parts to me in a couple of days.
I wouldn't hesitate to do the job again.
A lot of time was used to clean the filthy tub and basket.
While replacing the broken motor coupling I decided to replace some of the seals.
PartSelect got the ordered parts to me in a couple of days.
I wouldn't hesitate to do the job again.
Other Parts Used:
-
Bob from East Palestine, OH
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
83 of 176 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer was leaking underneath machine
While taking apart my washing machine to clean the plastic basket I discovered the 3 main seals down the agitator were completely disintegrated and water was leaking onto the motor and onto the floor. The seals are a tight fit but slide into place easily with lubrication. When putting everything back together a bit of lubrication will be necessary as well. The leak is gone and my nearly 30 year old washer is working as well as the day it came off of the assembly line.
Other Parts Used:
-
RAY from DEER PARK, TX
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
9 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Maria
November 21, 2018
I need a new lint basket
For model number 1109875279A
Hi Maria, thank you for your question. I have linked that part down below for you. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Ronnie
March 2, 2020
I am replacing the seals at the top of the spin tube along with the transmission and was seeing grease inside the spin tube and was wanting to know where it came from. Thanks. By the way the old transmission was noisy when it agitated but did not leak oil.
For model number RTW4440VQ1
Hello Ronnie, Thank you for the question. We suggest checking the Oil Seal Kit for Gearcase Input Shaft, PartSelect Number PS334494. We hope this helps.
Was this helpful?
Thank you for voting!
Related Parts:
Mike
March 13, 2024
Where does this seal go? In the diagram it appears it goes at the top, inside the basket tube, but when I took mine out of the tube, it appears a lot bigger and more like part "Seal, Centerpost WP8577374" part 14 on the diagram (which looks like it goes around the basket tube). Both of these seals will fit inside the basket tube, with this part being a lot smaller in height than the other.
For model number ETW4400WQ0
Hello Mike, thank you for your inquiry. The shaft seal, part number PS11741857, goes just below the center shaft seal, part number PS11746745, in the drive tube. The shaft seal is smaller than the center shaft seal in height. We hope this information is useful!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11741857
Manufacturer Part Number: WP356427
Manufacturer Part Number: WP356427
Brand
Model Number
Description
Kenmore
10682872600
Washer
- Kenmore Washing Machine Model 106.82872600 (10682872600, 106 82872600) Parts
Kenmore
1101050299
Washer
- Kenmore Washing Machine Model 110.1050299 (1101050299, 110 1050299) Parts