Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Odair
November 23, 2017
My washer start to make a grinding noise and was not spinning, I disassemble it and I notice the agitator was worn out do you think this can be the problem ?
For model number LSQ8000HQ0
Hi Odair, Thank you for the question. Yes, If the agitator is wore out then it will not grip and will cause the grinding noise. Good luck with your repair!
11 people found this helpful.
Was this helpful?
Thank you for voting!
DI
September 17, 2019
The top part of the agitator just goes around and does not push the clothing down.
For model number LSQ8543JQ0
Hello Di, Thank you for the question. I suggest checking the Agitator Directional Cogs, PartSelect Number PS388034. They are also sold as a kit PartSelect Number PS334648. If broken or worn, they can cause this issue. Hope this helps!
Washer bangs loudly and moves around mostly near the end of spin cycle. Suspension looks ok. Tub seems balanced correctly. Belt looks good. Any suggestions. Otherwise still washes the clothes fine.
For model number WTW4800xq4
Hello Herb, thank you for your question. Since those suspension and belt looks good and the load is balanced correctly, we would recommend replacing the Drive Block - 2 5/16" High Part Number: PS11741977. Please enter the part number into the site for current price and availability. Good luck with your repair!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Joe
October 5, 2023
Hi, are the cogs included in the kit (PS334648)?
Thanks
For model number WTW4800XQ1
Hi Joe, thank you for reaching out. The agitator cam kit, part number PS334648, that you have mentioned includes the cam, 4 cogs, and bearing. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Danielle
July 5, 2023
My dog ears keep coming loose causing the agitator to do a poor job. Do I need this whole assembly?
For model number LSQ9010PGO
Hi Danielle, thank you for your question. The agitator directional cogs can be purchased separately for this model. The part number is PS388034. If you require assistance to place an order, please contact customer service!
During the Rinse cycle, the tub rotation recently slowed and now only tries to move tub but no rotation now ?
Does a belt drive the tub or what part is needed ?
Thanks
Don
For model number WTW5800SWO
Hello Don, thank you for writing. Or first suggestion would be the Agitator Directional Cogs PartSelect Number PS388034. Next, try the Direct Drive Motor Coupling PartSelect Number PS1485646. We have an installation videos for you to access. We hope to hear from you soon.
Hello,
Washer stopped in mid cycle yesterday so I turned it off and back on again, it make a grinding noise for a couple of seconds while it tried to agitate then stopped working and only makes a humming sound now when turned on. Will fill with water but wont agitate or spin. Any suggestions on what might be the problem?
Thank you
For model number WTW5500SQ2
Hello Brad, thank you for the question. The main parts that are relevant to your issue are the drive motor coupling, part number PS1485646, and agitator directional cogs, part number PS388034. The agitator's directional cogs ratchet across the gear teeth in one direction and dig into the gear teeth in the opposite direction to create agitation. The motor coupling is a flexible coupling that connects the motor shaft to the direct-drive transmission. You may need to check these parts, as they are responsible for the agitation of your washer. We hope this sorts out your problem!
My washer will try to agitate however it on move 2-3 inches and rocks back an inch or two. I cleaned and replace the cogs but have the same issue. What is next?
For model number WTW4816FW2
Hello Tommy, thank you for the question. Based on our understanding of the issue, we would suggest checking the drive pulley, part number PS10057144. We hope this information is useful!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS334648
Manufacturer Part Number: 285809
