![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
Product Description
Icemaker Control Assembly Specifications
This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. Motor is not sold separately.
![How Buying OEM Parts Can Save You Time and Money How Buying OEM Parts Can Save You Time and Money](https://img.youtube.com/vi/d6AvOkulk_g/maxresdefault.jpg)
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Kenmore Refrigerator Icemaker Control Assembly
![Replacing your Kenmore Refrigerator Icemaker Control Assembly Replacing your Kenmore Refrigerator Icemaker Control Assembly](https://img.youtube.com/vi/sgJlBOR1KXk/maxresdefault.jpg)
Troubleshooting
This part fixes the following symptoms:
Ice maker not making ice | Ice maker won’t dispense ice | Leaking | Won’t start
This part works with the following products:
Refrigerator, Ice Maker.
This part works with the following products:
Kenmore, Whirlpool, KitchenAid, Amana.
Part# W10190935 replaces these:
AP4359694, 1469018, W10190935, 14210064, 483042, 483101, 483105, 626676, 626680, 626684, 627797, 627801, 627811, 627816, 628134, 628135, 628247, 628258, 628302, 628305
...
Show more
, 628332, 628342, 628357, 628358, 628366, 628398, 628399, 8240, R0167202, R0167203, RO167203, W10122536
Show less
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Michael D - December 24, 2022
Verified Purchase
Repaired ice maker which would not fill with water.
Part easy to install as it is complete with motor and drive control.
Ennio O - November 3, 2021
Verified Purchase
Excellent OEM Replacement
Exactly the same replacement
Darryl B - September 8, 2021
Verified Purchase
Easy repair
The right part at a good price. Shipping took a lot longer than anticipated. But it was the right part to fix the problem
Conrad J - August 24, 2021
Verified Purchase
Easy repair - works great
Delivery was quick. Got the repair done in minutes and we had ice again within hours.
David W - December 16, 2020
Verified Purchase
Great
It was exactly what I ordered
KAREN C - April 30, 2020
Verified Purchase
Worked perfectly
After talking to service rep this was the exact part I needed. Easy to install..and I have ice once again.
Willem V - January 5, 2020
Verified Purchase
Easy fix
The Kenmore fridge ice maker assembly is somewhat different than the one described in the video but was similar enough to figure out . It took less than 30 minutes too remove and reassemble and fix the problem .
Dwight C - June 5, 2019
Verified Purchase
easy repair worked well
The part was okay as received
Marc Q - May 24, 2019
Verified Purchase
Satisfied
The part arrived later then expected. But it's replacement was easy and now we have ice. This is the second time that i refer to PartSelect and i am quite satisfied.
Robert W - February 14, 2019
Verified Purchase
Icemaker Easy Repair
The ice maker control assembly arrived quickly and I had it installed in no time following the on line instructions.Working great thank you
- < Prev
- 1
- 2
- Next >
Customer Repair Stories
Average Repair Rating: 4.2 / 5.0, 203 reviews.
What's this?
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
No ice
removed flap door in front of icemaker...removed 3 screws with bolt heads...removed one additional screw with bolt head and ice unit slid out. I removed motor unit (pops out no screws). Replaced and had ice within 3 hours.
Other Parts Used:
-
Daniel from Suwanee, GA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
558 of 669 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Maker stopped working
With socket wrench un-screwed the 3 screws and pulled out the ice maker assembly.
Pulled off white plastic end-cap and noticed the plastic gear disk had snapped off (sub part # R0167202)
However, it is all-one-part of the motor assembly unit # w10190935 (part # PS2341896) which must be ordered as a complete part.
Unscrewed the motor assembly (3 screws) with phillips head screw driver.
Screwed in the new unit.
Placed ice maker back into location and tightend the bacing srews.
1 hour later ice was falling!
Pulled off white plastic end-cap and noticed the plastic gear disk had snapped off (sub part # R0167202)
However, it is all-one-part of the motor assembly unit # w10190935 (part # PS2341896) which must be ordered as a complete part.
Unscrewed the motor assembly (3 screws) with phillips head screw driver.
Screwed in the new unit.
Placed ice maker back into location and tightend the bacing srews.
1 hour later ice was falling!
Other Parts Used:
-
Robert from Port Washington, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
135 of 154 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Icemaker made a clicking noise then quit making ice
Motor from Part Select was 185W instead of 260W that came out of unit. After a bit of searching online, I found out the 260W had been obsoleted for lack of torque when harvesting ice.
Removal instructions: Unplugged fridge. Then I removed the screw on the bottom right rear of the unit. Then removed the plastic cover that covered the power connector. Pulled out the icemaker by pushing in the tab on the bottom left middle of the icemaker unit and pulling unit toward me. Unplugged the connector on the back right hand side. Removed the cover on the left side covering motor. Took out 3 philips screws and removed old motor with broken axle that spun freely (the source of the clicking noise). Put new motor in aligning harvest arm (the thing with the fingers) and did reverse of removal. Then plugged fridge back in and it started a harvest and the next morning I had a half tub of ice.
Removal instructions: Unplugged fridge. Then I removed the screw on the bottom right rear of the unit. Then removed the plastic cover that covered the power connector. Pulled out the icemaker by pushing in the tab on the bottom left middle of the icemaker unit and pulling unit toward me. Unplugged the connector on the back right hand side. Removed the cover on the left side covering motor. Took out 3 philips screws and removed old motor with broken axle that spun freely (the source of the clicking noise). Put new motor in aligning harvest arm (the thing with the fingers) and did reverse of removal. Then plugged fridge back in and it started a harvest and the next morning I had a half tub of ice.
Other Parts Used:
-
Ryan from Layton, UT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
77 of 96 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker just stopped working..
Did the diagnostics with the blinking light and couldn't decide what was bad....so ordered the control boards and the module motor assm. also. Turned out that it was the control boards and would suggest that future customers order that part first...if it isn't that then get the module and motor assm......these guys ship really fast and the prices are literally half of what Sears would charge, not to also mention the cost of their service man to walk through your door...OUCH!
Other Parts Used:
-
RICHARD T. from PATERSON, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
72 of 86 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice-maker Stopped Working
No water going into the ice tray. I unplugged the water valve solenoid at the bottom of the refrigerator in the back left corner, checked continuity on both. All showed resistance across the contacts so I believed the water inlet valves were at least not blown. The only other electronic component of the ice maker is the control board with the motor and then the thermostat. I purchased both. Also, make sure you buy the Aluminastic cement. It is the thermal contact point between the face of the thermostat and the ice tray. Expensive as heck, but unfortunately necessary. PartSelect should offer a very small tube for a small cost rather than a huge tube that you will never use for $27. Anyway, I put both the control board and thermostat in and an hour later was making ice again. Total cost was just over $100 for everything including shipping. I must say that PartSelect delivers fast and everything was exactly what I ordered, so the service is excellent and the website is excellent.
Other Parts Used:
-
Mark from Fort Mill, SC
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
69 of 672 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker not initiating harvest cycle (not making ice)
My troubleshooting narrowed down the problem to either the control assembly or the thermostat, so I bought both just in case. The motor assembly fixed the problem and I didn't need to install the thermostat.
The main thing I want to tell others who are doing this repair, however, relates to the thermostat. If you do indeed need to replace the thermostat (#PS380941) there is something you will need that is not included with the part or mentioned anywhere on this site. The instructions with the thermostat indicate you need to apply something called "Aluminastic" to the thermostat when installing it. I don't know about you, but that isn't something I have around the house, so be sure to order a tube of it when you get the thermostat so you don't have to take a trip to the store to get it to finish the repair.
The main thing I want to tell others who are doing this repair, however, relates to the thermostat. If you do indeed need to replace the thermostat (#PS380941) there is something you will need that is not included with the part or mentioned anywhere on this site. The instructions with the thermostat indicate you need to apply something called "Aluminastic" to the thermostat when installing it. I don't know about you, but that isn't something I have around the house, so be sure to order a tube of it when you get the thermostat so you don't have to take a trip to the store to get it to finish the repair.
Other Parts Used:
-
John from Elgin, TX
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
66 of 74 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No Ice, Water did not fill icemaker
We weren't sure if the problem was in the Water Inlet Valve or in the Icemaker Control & Motor Assembly. The water in the door did work. We removed the Water Inlet Valve & tested it with an Ohm Meter. It tested good so we put it back in. We then ordered the Icemaker Control & Motor Assembly. When it arrived we installed it and waited a few hours but the icemaker still did not fill with water. We telephoned a parts store and were told the problem could be the thermostat or we could replace the whole icemaker. We replaced the whole icemaker.
Other Parts Used:
-
Barbara from Davenport, IA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Screw drivers, Wrench (Adjustable)
45 of 59 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker quit making ice
I removed the ice maker which required removing 3 screws and then disconnecting the electrical plug. Once the ice maker was out, I removed the 3 screws that held the motor assembly to the unit.
I removed the motor, replacing it with the new one.
Plugged the power supply cord back in, replaced the unit with the 3 screws and within a few minutes the unit was receiving water and by the next day I had ICE. This saved me $50. for the service call, then another $25.00 installation fee when the part came in (had to be ordered) plus the markup on the motor (approx. $25.00) So I saved approx. $100. and only took about 30 min.
I removed the motor, replacing it with the new one.
Plugged the power supply cord back in, replaced the unit with the 3 screws and within a few minutes the unit was receiving water and by the next day I had ICE. This saved me $50. for the service call, then another $25.00 installation fee when the part came in (had to be ordered) plus the markup on the motor (approx. $25.00) So I saved approx. $100. and only took about 30 min.
Other Parts Used:
-
Dean from Pahrump, NV
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
44 of 49 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water to ice maker not shutting off; overflowing
1. turn off power.
2. pop off ice maker cover to access motor assembly.
3. remove three screws to assembly.
4. pull off assembly.
5. attach new assembly making sure metal arm and plastic
ice tray rod align with assembly.
6. screw assembly onto unit.
7. replace cover.
8. plug in refrigerator.
9. enjoy ice again with no leakage into freezer.
2. pop off ice maker cover to access motor assembly.
3. remove three screws to assembly.
4. pull off assembly.
5. attach new assembly making sure metal arm and plastic
ice tray rod align with assembly.
6. screw assembly onto unit.
7. replace cover.
8. plug in refrigerator.
9. enjoy ice again with no leakage into freezer.
Other Parts Used:
-
g anthony from salt lake city, UT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
43 of 48 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice was being made, but wouldn't drop
My icemaker wouldn’t pop out the ice. I bought a used fridge from 2nd Time Around in Russellville AR which was the most horrible customer service experience of my life. They were supposed to have a 60 day warranty but didn’t follow through. After months of begging them, and knowing what part I needed, I just ordered it myself. It was so easy and quick and fixed my issue my husband said we should have done that months ago and avoided the hassle. It was worth the money to have the peace of mind. Now everything is perfect! All we had to do was remove the icemaker, take off the side with a screwdriver, replace the part and slide it back in. We had ice in hours! Shipping was quick (a couple days) the part was 30 dollars cheaper than other places I checked. We love it!
Other Parts Used:
-
Brandie from Dover, AR
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
39 of 51 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bruce
August 4, 2017
My freezer is not making ice. How do I know what the problem is.
For model number gz25fsrxyyo
Hi Bruce,
Thank you for the question. I would first check to see if the ice maker is getting water. If no water is entering the ice maker it could be the water valve. You can take a glass of water (enough to fill the ice maker tray) and pour it into the ice maker and wait to see if it makes ice. If no ice is made then you have a problem with the ice maker. If it does make ice then the valve might not be opening up and sending water to the ice maker.
You can also check the water filter. Make sure it has been replaced within the last 6 months. If it becomes clogged or old it can prevent the ice maker from making ice.
Hope this helps!
66 people found this helpful.
Was this helpful?
Thank you for voting!
Chris
March 28, 2018
Ice maker not making ice. I replaced the water valve but still not working. Is there a way i can test the ice maker assembly with a multimeter. I would really like to know exactly what to get and not waste money on unnecessary parts
For model number KSRB25FNSS00
Hi Chris,
Thank you for your question. You cannot use a multi meter unfortunately you would need to have a small piece of insulated wire to test your ice maker. When you remove the ice maker cover that covers the motor, there are two holes at the bottom right hand side of the white wheel on your motor. They are labeled T and H. Place the insulated wire into those two holes and make sure your ice maker is on. If your motor wheel does not start to turn to make ice and bring up your water, then your ice maker is broken and needs to be replaced. Be very careful doing something like this and make sure that you use an insulated wire so that you do not get an electric shock. I hope that helps. Good luck with your repair.
34 people found this helpful.
Was this helpful?
Thank you for voting!
Bill
February 1, 2018
No ice in maker-no water in ice tray-door water dispenser works.
For model number KSRB25FHSS04
Hello Bill, thank you for your question. First I would check to see if the ice maker will make ice if you manually fill it. You can take a glass of water (enough to fill the ice maker tray) and pour it into the ice maker. If no ice is made then you have a problem with the ice maker. If it does finish the cycle and dump the ice into the bucket, then the issue might be the valve. The valve might not be opening up and sending water to the ice maker. You can also check the water filter. Make sure it has been replaced within the last 6 months. If it becomes clogged or old it can prevent the ice maker from making ice. Hope this helps!
19 people found this helpful.
Was this helpful?
Thank you for voting!
Carl
October 18, 2017
Ice maker not dispensing ice. Heard water running to ice maker.Checked later and found that water had dripped down from ice tray onto lower shelves and freezer door. Water is frozen on door and icicles formed on the edges of lower shelf. Could this be a faulty ice ejector motor? Thanks
For model number KSCS25INBL01
Hi Carl, Thank you for the question. It sounds like the ice maker is over filling. This normally means the Water Inlet Valve is not closing properly.You can pour a cup of water into the ice maker and see if it makes ice. If the ice maker works when filling it manually and the water pressure is good going to the appliance, I suggest replacing the water valve. Hope this helps!
13 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Pete
December 29, 2017
My icemaker is overfilling the water. Is there an adjustment for the cube size on the icemaker?
For model number MFF2558VEM10
Hello Pete,
Thanks for your question. The icemaker control assembly affects the size of the ice cubes. There is a plastic screw for the water level adjustment on the right side when you look at the icemaker. Adjust it to adjust the flow of water to the icemaker.
I hope this helps.
11 people found this helpful.
Was this helpful?
Thank you for voting!
Joe
October 30, 2017
Ice maker control light flashing red, no ice, water works, filter has been replaced, frig was emptied for 24 hours.
For model number KSRP25FNSS00
HI Joe, Thank you for the question. I suggest testing the emitter and receiver boards.To test the board you need to open the freezer door and look at the status LED on the right hand side. Make sure the ice maker control is turned “ON”. The status LED should blink twice, pause, and then repeat,blink blink…. pause, blink blink… pause.Next with the freezer door open, hold down the flapper door on the left side to unblock the optics beam. With the optics unblocked, the LED should light up and stay lit with no blinking. If the status LED continues to blink twice , then you have defective optic boards and they will need to be replaced.If there is no LED light on, then the ice maker could be in “harvest” mode. Hold down the freezer light switch, the status LED should flash every second while in harvest mode. If the LED light still does not flash, then the optic control boards will need to be replaced. Hope this helps!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Peter
December 29, 2017
Ice-maker occasionally leaks water inside the freezer along side the ice-maker, and creates solid ice running down the freezer (near the door). Also it stops producing ice and due to an ice cube being stuck in the ice-maker, or frozen ice in the black tube which handles the water.
For model number GD2SHAXNT00
Hello Peter, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: the water inlet valve, the defrost heater, the defrost thermostat, the thermistor, the ice maker control assembly, and the thermostats. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Dave
February 25, 2018
Icemaker not making ice i have water to the water dispenser no water to the icemaker. I replace the water filter. I came in and the floor was covered with water but no water comes into the icemaker .
For model number KSRB22FHSS02
Hello Dave, Thank you for your inquiry. We would advised checking the tubing going from the water inlet valve to the icemaker and the and the ice maker water fill tube to see if it is frozen, clogged or cracked. You can also test the ice maker to see if it is functioning properly. To do so, cut a 6- to 8-inch length of 14-gauge solid electrical wire. Use a pair of wire strippers to remove about 1/2 inch of the electrical insulation from each end of the wire. Grab the square cover on the front of your ice maker inside your freezer with your hand. Rock the cover back and forth as you wiggle it away from the front of the ice maker to expose the round gear beneath it. Find two small, round openings marked “H” and “T” beneath the gear. Insert the bare ends of the electrical wire into the openings, so one end of the wire is in one opening and the opposite end is in the other. The wire overrides the timer and manually activates the ice maker. Hope this helps!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Marvin
December 6, 2017
The ice marker is over filling, leaving icicle on both ends. I replaced the water valve but still having same problem. Do i need to replace the unit control ?
For model number ED25DQXAN00
Hi Marvin,
Thank you for your question. If the water pressure is too low, the valve may not close fully when the power is shut off. This will cause the valve leaks water into the ice maker, causing it to overflow. You will need to check the water pressure. The valve requires a minimum of 20 psi to work properly. You will need to also check the ice maker to see if it is working properly as it may be defective. I hope this helps. Thank you and have a great day!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Carl
January 11, 2018
Why does my ice maker not dispense ice from the ice chute? Ice maker works fine making ice but when i try to get ice from the dispenser nothing happens, auger doesn't turn nor does the ice chute door open. Just hear a click when trying to get ice
For model number GD5NHAXSQ00
Hi Carl,
Thank you for your question. If the ice dispenser is not not dispensing ice, you will need to check the dispenser control board. I hope this helps. Thank you and have a great day!
5 people found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2341896
Manufacturer Part Number: W10190935
Manufacturer Part Number: W10190935
Brand
Model Number
Description
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)