Average Repair Rating: 3.9 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Ice-maker Stopped Working
No water going into the ice tray. I unplugged the water valve solenoid at the bottom of the refrigerator in the back left corner, checked continuity on both. All showed resistance across the contacts so I believed the water inlet valves were at least not blown. The only other electronic component of the ice maker is the control board with the motor and then the thermostat. I purchased both. Also, make sure you buy the Aluminastic cement. It is the thermal contact point between the face of the thermostat and the ice tray. Expensive as heck, but unfortunately necessary. PartSelect should offer a very small tube for a small cost rather than a huge tube that you will never use for $27. Anyway, I put both the control board and thermostat in and an hour later was making ice again. Total cost was just over $100 for everything including shipping. I must say that PartSelect delivers fast and everything was exactly what I ordered, so the service is excellent and the website is excellent.
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Annmarie
December 14, 2019
We dropped a bottle and cracked the plastic/acrylic in the refrigerator wide shallow bottom drawer. Is replacement possible? Would your adhesive fill it? Thank you
For model number WRF540CWBM01
Hi Annmarie, you will most likely need a new drawer. Thank you for your question and good luck with your repair!
The plastic divider that holds the produce drawers so they can slide in and out has broken.
Do you have a replacement one?
For model number 59677603804
Hello Angela, thank you for reaching out. The part you are looking for is the humidity control slide, part number PS11743638. This part mounts on the produce drawer cover and is used to limit the amount of air that gets into the crisper. Glad to be of assistance!
Slow to make ice. The recirculating pump, drain pump, ice bin thermistor, and water inlet valve with filter has been changed. Please advise of what to do.
Thanks,
For model number KUIX505EBS1
Hello Bruce, thank you for contacting us. Based on the description that you have provided, the issue is most probably with the electronic control board, part number PS12346592. It manages the functions of the ice maker such as freezing and slicing the slab of ice, and dropping cubes into the ice container. You may need to replace it to fix the issue. Glad to be of help!
