Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
TIMOTHY
September 8, 2023
Getting an E91 error code. Tried everything listed in the manual about diagnostics but nothing on the control panel works. Tried unplugging and removed the front panel to check connections but can't find anything noticeably wrong.
For model number EFLS527UIW
Hi Timothy, thank you for getting in touch. The E91 error code indicates a communication error between the user interface board and the control board. If there is no issue with the connections, then you may need to check the user interface board, part number PS12365882, as it is most likely faulty and may need to be replaced. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Paul
October 22, 2021
I am getting an E11 at takeoff, changed the water pump, (part #5304528029 valve assembly, vortex, w/flow M) and have checked and cleaned the drainage filter and pump, all clean, do you think the issue is with the circuit board? If so, which of the following is it since the number on this board does not correspond to your part numbers?
For model number EFLS627UTT0
Hello Paul, Thank you for the question. The E11 error indicates the washer is taking too long to fill with water. If the New Valve did not fix the issue and the water pressure from the House Supply is good and the taps are fully open, we suggest checking the Pressure Hose is clear and there is no build up preventing the water from properly getting through. If the Hose is clear, you may have a defective Water Pressure Switch. We hope this helps!