EFME527UTT0 Frigidaire Dryer - Overview

Diagrams for EFME527UTT0

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Belt – Part Number: 134719300
$38.95
In Stock
Belt
★★★★★
★★★★★
(6)
Part #134719300
If your dryer drum has stopped spinning and your clothes are coming out damp, it might be time to replace the belt. This essential part helps the drum rotate, allowing warm air to circulate and dry your laundry properly. Made from sturdy material, it’s built to last but can wear out with frequent use. Replacing it is a manageable DIY project—just grab a screwdriver and wrench to access the belt and swap it out. This part is sold individually, so you’ll only need one to get your dryer running smoothly again.
High Limit Thermostat – Part Number: 3204267
$69.25
In Stock
High Limit Thermostat
★★★★★
★★★★★
(3)
Part #3204267
This high limit thermostat has a limit of 260 degrees Fahrenheit. Meaning that it will cut out when the internal dryer temperature reaches 260. This thermostat cuts back in when the temperature drops by 70 degrees Fahrenheit.
Screw – Part Number: 131302800
$28.95
In Stock
Screw
Part #131302800
This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. The main reason you would replace this screw is if the old screw is missing or damaged. This part is sold individually and is an OEM part sourced directly from the manufacturer.
High Temperature Adhesive – Part Number: 5308027429
$72.65
In Stock
High Temperature Adhesive
★★★★★
★★★★★
(1)
Part #5308027429
Used for installing felt and rubber seals on dryers.
Thermal Fuse – Part Number: 137032600
$42.60
In Stock
Thermal Fuse
Part #137032600
BLOWER WHEEL – Part Number: 5304513609
$66.91
In Stock
Drum Roller - Sold Individually – Part Number: 5304523152
$45.22
In Stock
Drum Roller - Sold Individually
Part #5304523152
This replacement drum support roller helps keep your dryer drum turning smoothly and quietly during operation. Designed for reliable performance, it supports the drum as it rotates to help reduce excess noise, vibration, and wear. Replacing a worn roller can help restore proper drum movement and improve dryer performance. For installation, unplug the dryer, access the drum support area, and replace the old roller with the new component. Always wear work gloves for added safety during repairs.
Thermal Fuse – Part Number: 134711401
$44.95
In Stock
Thermal Fuse
★★★★★
★★★★★
(4)
Part #134711401
This dryer thermal fuse is a critical safety component designed to protect the appliance from overheating. It automatically shuts off power to the motor or heating system if excessive temperatures are detected, helping prevent damage or potential fire hazards. Once the fuse is triggered, it cannot be reset and must be replaced. A faulty thermal fuse may cause the dryer not to start, run without heat, shut off prematurely, or operate at unsafe temperatures. Replacing this component helps restore safe and proper dryer operation.
SCREW – Part Number: 131168200
$29.95
In Stock
SCREW
Part #131168200
Sold individually.
HEATER,ELEMENT,4700W – Part Number: 5304535760
$140.14
In Stock
HEATER,ELEMENT,4700W
★★★★★
★★★★★
(1)
Part #5304535760
This element is strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current and as a result, the wire heats up. The heat produced is used to dry the clothes in your dryer.
LEVELING LEG – Part Number: 134158001
$37.35
In Stock
LEVELING LEG
★★★★★
★★★★★
(1)
Part #134158001
Are you tired of your dryer wobbling every time you use it? Our LEVELING LEG, an original equipment manufacturer (OEM) part, could be the solution you need. It's designed specially to make your dryer sturdier and keep it steady, stopping that annoying shake. The LEVELING LEG is totally genuine and made by respected brand Frigidaire, so you can trust its quality and durability. It's also adjustable, meaning you can make it the perfect height for your exact model of dryer. Installing it is safe and straightforward, but to protect yourself, always remember to switch off the power at the mains and wear work gloves during the installation. Once you've got it fixed in place, your dryer will feel as good as new - steady, secure and shake-free. The LEVELING LEG is compatible with certain Frigidaire models. So, go ahead, give your dryer the support it needs with this handy, straightforward fix. Enhance your laundry day with the Frigidaire LEVELING LEG.
MOTOR – Part Number: 5304529782
$357.21
In Stock
MOTOR
★★★★★
★★★★★
(2)
Part #5304529782
If your dryer drum isn’t spinning or the airflow seems off, the drive motor might need replacing. This motor comes with the pulley already attached for the drum belt and has reverse threads to hold the blower wheel securely. It’s built to keep your dryer running smoothly and efficiently. Just make sure to unplug the dryer before starting the repair—it’s a simple safety step that makes a big difference.

Common Symptoms of the EFME527UTT0

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Drum belt broke
7 of 8 people found this instruction helpful.
  • Scott from PFLUGERVILLE, TX
  • Easy
  • 1- 2 hours
  • Pliers, Screw drivers, Wrench (Adjustable)
I removed the front, top and back panels of the dryer, installed belt around drum and through the pulley system so the belt was snug, replaced all screws and panels, and done.
Was this helpful?
Thank you for voting!
dryer stopped in middle of cycle and would not restart
5 of 7 people found this instruction helpful.
  • MICHAEL from HUDSON, NY
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
followed the repair video and replaced thermal fuse and thermostat(recommend replacing both due to the problem could of resulted in either part being the cause),Repair went relatively easy.I also recommend to clean and vacuum the dryer while you have it all apart due to a lot of lint buildup and don't forget to unplug before servicing!Sta y Safe!!!
Was this helpful?
Thank you for voting!
Cloths not drying
5 of 8 people found this instruction helpful.
  • keith from ELLENVILLE, NY
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers, Socket set
Removed the back panel and the exhaust hose.removed the heater element and changed the thermostat wire was melted cut damaged part of wire soldered and rapped with black electrical tap
Was this helpful?
Thank you for voting!