Control panel houses the display and control selection components for the washer.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool.
Part# W10920641 replaces these:
AP6037487, W10607406, W10774112, WPW10607406
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ted
December 14, 2018
Clotheswasher will not initiate wash cycle. Water starts then stops.
For model number WTW5000D
Hello Ted, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: Lid latch assembly, water inlet valve, drive belt, and lid strike. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Kim
June 17, 2019
The Green light comes on and says sensing. It will not advance past this stage? Is that a whole panel problem or just a button issue?
For model number WTW5000DW1
Hi Kim,
Thank you for your question. Try setting the washer on drain/spin and see if the washer will drain or spin. If it does not drain or spin, check the tech sheet that came with your washer and follow the steps it provides to resolve this issue. If these steps do not resolve the issue, you will need to replace the actuator. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Rebecca Carte
January 21, 2023
Need the sensor that controls the agitation of washer tub. Everything else works fine, just not agitate after the tub fills with water.
For model number WTW5000DW1
Hello Rebecca, we are glad you asked! The part that controls the agitator is the Control Board PS12114296. We are pleased to have been able to help.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11770161
Manufacturer Part Number: W10920641
